Part Out - 10sec 600hp 1991 Talon AWD
 

keep all the questions, requests, etc IN THIS THREAD if possible . Please don't PM me saying you want this and that because it gets very confusing. I'd like to keep as much as possible in this thread. Or if you absolutely need to, you can PM me or call me at 612 384-1425
-----------------------------------------------------------------------------------------------------






3" Vibrant resonator - $40
http://www.mitsustyle.com/photopost/...m/P9070569.JPG

Forge BOV (pretty sure I have the spring kit for this as well for various psi setups) - http://mitsustyle.com/forums/attachm...2&d=1233977461 - $95
http://mitsustyle.com/forums/attachm...2&d=1282612067

Universal Coolant Overflow bottle - $15
http://mitsustyle.com/forums/attachm...4&d=1282612091

Greddy white face EGT gauge and probe (appx 6 years old) - $35
http://mitsustyle.com/forums/attachm...8&d=1282015671


Beatrush solid driveshaft bushings, brand new (fits EVO and DSM) - http://www.maperformance.com/beatrus...051pmb-2t.html - $40 - Pending Sale

10" Hayden Fan - few years old - you can see a pic of it laying on the floor in the 3rd picture of the motor above - $10 - Pending Sale

Starter - $10 - Pending sale





Feel free to make offers if you feel something is priced too high. I feel like I priced it all very competitively, but am willing to listen to offers.




-----------------------------------------------------------------------------------------------------
Items that have been sold



Eagle/Mahle 2.0L short block originally built by MAP, E85 has kept the piston tops pretty deng clean. Compression was 165 across all 4 before removed (this was with 272's installed), exterior of block was painted black by MAP - Please contact me via phone or pm for more info regarding this - What is pictured is what you will be receiving (minus the knock sensor), which is why I took pics at different angles - $800 - Sold


HKS 272's - $275 shipped - Sold

17x8 35 offset Rota Boost rims (bronze) w/ Sumitumo HTR Z3 tires (235/45) - tires are nearly new, lots of tread left - $675 - Sold

ETS FMIC 3" thick, about 1 year old, still looks damn near new - $360 shipped - Sold

3" Pypes resonator - $40 - Sold

3" Magnaflow muffler w/ tip - $40 - Sold

PLX Wideband - will include a used and brand new sensor - $190 shipped - Sold

SW white face Boost gauge 30-0-40 (1 year old) - $45 shipped - Sold

Stock 6-bolt flywheel & A/C bracketry - $20 - Sold

SS Turbo oil feed line - - Appx 3 years old - $10 - Sold

Eibach Sportlines w/ KYB AGX's - $375 - Sold

Tial 44mm Wastegate ($300 new) - $210 shipped - Sold

SLS T3 Mani - lifetime warranty - $425 - Sold

S362 (.70AR t3 V-band out) - Turbo has the normal little bitty shaft play. Will include the push-lock drain line, as well as the drain and feed adapter fittings. Feed line not included - short vid available upon request but please only ask me to send it if you are seriously interested - $625 shipped - Sold

Two 10" FAL fans- $35 - Sold

Pair 6x9's - $20 - Sold

Mishimoto Rad Cap - $15 - Sold

Aeromotive AFPR kit from Import Evolution - $120 - Sold

Taylor 10mm plug wires - will include a new set of 4 NGK plugs for free with these - $40 - Sold

Powder Coated Valve Cover (will also include the upper timing and spark plug covers which have been spray painted to match the VC) - $55 - Sold

Golan -6 fuel filter and -6AN nylon braided fuel feed, stock 1G fuel rail with AN fitting attached for feedline, and fittings that allow the Golan to attach to the stock lines (see pics) - $100 - Sold

Homemade Mini Battery setup - $100 - Sold

CF Hood (w/ CarbonTrix Vent) - $400 - Sold

Brand new Napa Front Pass Axle, still in the box - $35 - Sold

JMF 1G front bumper replacement thingy - $130 - Sold

Brand New OEM Mitsu Plug Wires - $40 - Sold

Tubular front crossmember - $150 - Sold

JMF Race SMIM - $360 - Sold

PTE 1600's - $190 - Sold

Two Walbro 255hp pumps - $120 for the whole setup - Sold

ARP L19's (used for 1 year) - $150 - Sold

ACT2900 PP - The clutch disc was pretty much spent, so just selling the PP. It's used, but could be roughened up and reused - $25 - Sold

Dynatek Arc-2 ignition box - Plug n Play harness for a 1G (not sure if it's the same between 1G and 2G) - $300 - Sold

4" CAI - This was custom made by MAP (= expensive), places the MAS in the fender well, fits perfectly with my S362 but may require slight tweaking to line up with your turbo setup. I tried to show how it also has a bracket right before it bends down into the fender well, that bolts to the body which holds it nice and steady - $100 - Sold

External Oil Cooler and lines (pushlock) - $120 - Sold

CAS - $15 - Sold

Interior Seat Swap - $60

EPROM ECU w/ Keydiver chip - $230

Rolling Shell - SOLD locally!
w/
- Rear Subframe with Jay Racing Toe Eliminator installed.
- 1GNT Throttle Body
- 4-Bolt Rear End
- Adjustable rear upper control arms
- Shifter Bushings
- Tinted Tails
- Evo8 MAS w/ pigtail and 4" adapter coupler, and KN Filter 3 yrs old w/ MAS adapter flange
($1000 rcvd)

DSM 3rd Gen design lifters - appx 5k miles on them - $50 shipped - Sold

Cobra front brake kit. This will include calipers, brackets, bolts and washers, black braided 2G lines, and rotors (rotors have some surface rust where the pads don't contact) - $475 shipped - Sold

Apexi Turbo Timer w/ harness for 1G - http://www.maperformance.com/apexi-turbo-timer.html - $55 shipped - Sold

Stock Coolant Pipe with turbo feel line welded shut by MAP (good for people running oil cooled turbo setups) and used Knock Sensor - $35 shipped - Sold

Evo Shift Knob - $22 shipped - Sold

2G Head & 90 Oil Filter Housing. - $381 shipped - Sold

Mishimoto Alum Radiator - $150 shipped - Sold

Stock oil pan modified with a -AN fitting welded (by MAP) for the oil return & JMF dual chamber catchcan setup - $93 shipped - Sold

2 new OEM driveshaft carrier bearings from the dealer, - $125 shipped - Sold

TRE Stage 1.5 tranny w/ 4-spider center diff, - $600 shipped - Sold

DSMLink V2 with USB cable (no computer included)- $190 - Sold

A/C compressor (has fitting on it for Freeze 12 conversion) - $40 - Sold

Alternator in good working condition - $20 - Sold

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Texted you back. Let me know what your plan is because there are a lot of others already interested in it. But of course I'd prefer to sell locally so let me know what you're thinking.

Also, I'm getting some PM's for stuff. Like I said above, please try and keep it in this thread. It makes it so much easier for me I think.

I'm adding some pics as well. Will continue to add pics as I get them.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Can I get pics of the hood? You wouldn't take payment plans for it would you? :o

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

I'll take the small battery setup I texted you about. Do you take paypal? If so I can send you money ASAP and pick it up whenever. If not, I can make some plans to pick it up on Wednesday if you are around.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Spoke to you over PM. I will get some pics tonight.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

I will get you pics of the battery setup. I'd prefer cash over paypal as paypal likes to dip their hands into the transactions :)

I'll get you pics, if you want it I'll just consider it sold and hold it for you.

But as far as picking it up Wednesday, I don't think that'll work because I plan to start disassembly next Monday. I'm enjoying the car for the rest of this week like I said in the first post.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Ok, I can send you the money as a gift so they don't get their cut too ;)

I can also give the guys at Primo some cash when they come pick up my car tomorrow and give them an extra $10 for gas money or whatever if you wanna bring it over there at your convenience, that way they can just hand you the cash.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Primo is only 5 minutes from my work. If you want to give them the cash, then sure I can just get the money from them and drop off the battery kit with them, but don't worry about $10 gas money.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

I want the oil cooler set up. When are you avaible?

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Is the shell getting crushed? There isn't a price for it.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

I will take the pressure plate/clutch pending removal/inspection.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

I'd be interested in the shocks, springs, wheels, rear control arms, possibly the entire dual walbro setup. I am pondering, but just letting you know I have interest.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Hey Brandon, like I mentioned, I'd like the Taylor wires for sure, and I'll pick up the radiator cap for sure as well(for my cousins 1g, he may want some other stuff, but he'll contact you about that.. screen name Launchhard).

We'll chat about the tranny, if someone comes with cash, sell it, otherwise I'm very interested.

Oh, and yes, I think the intercooler may be a good option/fit for your next project(may need a little work on the inlet/outlet, but worth keeping IMO).

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Pics added of the CF Hood for those asking for pics. Like I tried to mention, the vent needed to be trimmed to fit around my manifold, and near that trimming you can see a slight brown from the heat. But it's nothing really.

And if you don't like the trimming, the vent was boughten from CarbonTrix, and you can just buy a new one for like around $90 and rivet it in.


Also added pics of the battery kit. I had the JMF one at first, but it doesn't fit right if you still have A/C. So I made this one myself, and so it fits with A/C.


So now some of you are saying you're interested, but now that you've seen the pics, let me know if you are still interested and I'll place you as the pending buyer.

FYI, there's 2 people interested in the battery kit, and 2 people interested in the hood. So the sooner you let me know, the better because there's multiple people asking for them.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Again, this thing is getting disassembled on Monday. So anytime after Monday. I'll put you as pending sale so you have dibs. If you don't want it, let me know asap so I can take your name off of it.

FYI the oil cooler kit will include the cooler, the lines, and the fittings that go into the 90 OFH. But it does NOT include the filter housing. If you want the housing as well, let me know and we can talk.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Sounds good. I won't put you down as the pending buyer since you're just thinking about it. But let me know if you do. Just an FYI that there are others also pondering those control arms and the pumps. So if you really want them, let me know because the first person to tell me they 100% want them, they will get dibs.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

I'll be giving Blageo money for the Battery kit tomorrow. You can pick it up at Primo after work tomorrow and drop off the battery any time in the next couple weeks. :D


Edit, I'll give him money for the Golan Fuel filter setup also if that isn't taken.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Sounds good, I put you down as the pending buyer, and we'll see what she looks like when it's removed!

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Will do! Keep in mind I bet Blaine is closer than Primo though, so if you want to just come pick it up here in the next couple weeks it might save you a couple minute drive.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

OK I've added a bunch more pics. If you don't see your name next to something, that means somehow I missed that you wanted something, or it didn't sound like you were 100% serious yet.

So let me know ASAP if you want something 100%.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

i need the 4 bolt rear. and the front lower A-arms. call me boss.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Don't think I wanna part with the front arms at this point.

As for the 4-bolt, I'll talk to ya :)

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Also there was someone who wanted the shifter bushings, but I must have deleted your PM. So please get back to me if that was you because I don't remember who you are.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

if possible i would like to buy the entire rear assembly control arms and all.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

im looking for a set of rear brake calipers. whats your price or would you want to trade for anything in here?

http://www.mitsustyle.com/forums/showthread.php?t=26591

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

How much life is left in the tires?

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

The fronts have a bout 500 miles on them. The rears probably like 3000 miles. Feel free to come by and check them out, but I believe they are in pretty good shape.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

OK a bunch more people have either already sent me money, or told me they are 100% interested. So I've updated the list. Those of you who were "thinking" about getting stuff, I wasn't lying when I told you that you weren't the only ones interested ;)

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Shell I haven't completely decided yet. But chances are it will be sold as a rolling shell. There's already some interest in that as well :)

And hey I need my cherry picker back!

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Brandon LMK about the shell. I probably won't pay as much as people who still have crazy DSM envy, but I'd love to have a shell to slowly build to what my car was.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Motor and tranny are out (thanks brownski) . So those of you who called dibs on stuff, start coming and grabbing your stuff.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Part out has begun!!!
Lot of nice stuff up for grabs, looks like that shell could be moving pretty soon.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

i would like the pte 1600's and a wally 255

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Sure. When do you want to come get them?

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

pmed

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

OK I've added more pics as pieces are off the car now.

I've also added a few more items that I forgot about and didn't have up before.

To those of you who called dibs on this stuff, I've listed it as pending sale to you. If by next Monday it's not gone, then they are going to the first person who shows up with cash.

Also, I prefer to sell locally, but am going to start listing this stuff elsewhere as I need this stuff sold, and gone, so I can move onto another project.

I will be leaving for up north on Friday afternoon (won't be back home until Monday morning), with off/on cell coverage. So with that Monday deadline, I suppose that means if you want this stuff, you need to come pick it up before say 3pm on Friday. And if you were planning on picking it up over the weekend, I won't be around so you need to get ahold of me prior to then.

I don't mean to come off sounding like a prick, but there are people waiting (hoping) for those that called dibs on certain items to back-out because they want them.

I need this money, and need this stuff gone so I'm holding it for you all for a week, and if by Monday I still have stuff, then whatever is left is going to the first person to show me the money.

The only way I'll hold anything past Monday is if you've given me a down payment, or if you get me the money via paypal or something.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Hey I just want to let you know we got the clutch out, and well, it definitely is in "used" condition. I can't, in good nature, sell it to you what I originally was asking. I will get some pics up, and make me an offer if you are still interested.

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Bring the wires and radiator/coolant cap to work tomorrow?

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

Yup they are already in the truck in a pretty blue bag :)

Re: Part Out - 10sec 600hp 1991 Talon AWD
 

I don't see my name by the fuel filter setup. Also, I thought the battery was $100 before, not $110? Idk, maybe the eyes are playing tricks on me. haha

Anyways, you have $200 with your name on it waiting at Primo for them parts, :)