lets see everyones valve cover..
 

lets see what everyone has done to there valve cover.. ill start off with mine. shitty cell phone pic

http://i330.photobucket.com/albums/l...valvecover.jpg

Re: lets see everyones valve cover..
 

Re: lets see everyones valve cover..
 

Lmfao^^^

Re: lets see everyones valve cover..
 

This is pretty cool!

What paint would you use to make sure that it could take the Under the hood temps?

Re: lets see everyones valve cover..
 

its prolly vinyl like these guys' :

http://farm3.static.flickr.com/2535/...96425e6e_b.jpg

http://farm3.static.flickr.com/2669/...8ef1c932_b.jpg

haha

http://i280.photobucket.com/albums/k...o/Cancover.jpg

Re: lets see everyones valve cover..
 

Post YOUR valve cover sluts!

Fully shaved, gloss black PC on my evo:

http://www.scheides.com/albums/evo-v...0511.sized.jpg

its impossible to take a good picture of since its black, but IMHO it looks soooo hawt in person :D Just nice and clean!

Re: lets see everyones valve cover..
 

What did u shave on there? Are they pretty smooth already?
I've heard a lot of people just spray paint(gun) too

Re: lets see everyones valve cover..
 

Gnarkill that is a dope valve cover, very creative and original.

Re: lets see everyones valve cover..
 

http://i217.photobucket.com/albums/c...g?t=1262300510

http://i217.photobucket.com/albums/c...g?t=1262300494

http://i217.photobucket.com/albums/c...g?t=1262300533

Old photos and I don't have an after of the painted valve cover off of the car so here it is on. Old engine bay shot.
I am surprised on how far I have went with it....

Re: lets see everyones valve cover..
 

GnArKiLl, thats a bad ass valve cover!

Shaved, 10an bungs welded in stock breather locations, removed baffle, and rattle canned gloss black.
http://i6.photobucket.com/albums/y20...A/DSC_0031.jpg

Re: lets see everyones valve cover..
 

Re: lets see everyones valve cover..
 

hhhm shaved 420a VC. nice!

Re: lets see everyones valve cover..
 

Lines across the front, a magnesium symbol, more lines, and a triangle on the back. It wasn't much, but it always bugged me :)

Brad, love yours!

Re: lets see everyones valve cover..
 

http://photos-d.ak.fbcdn.net/hphotos..._5650862_n.jpg

You can see it in there somewhere. BBQ black!

Re: lets see everyones valve cover..
 

haha is that a 4.0 jeep motor?

come on guys this cant be all of them!

Re: lets see everyones valve cover..
 

looks like ninja turtle green but is more lime green in person

http://photos-g.ak.fbcdn.net/hphotos..._3411622_n.jpg

shaved by myself with a damn dremel!

Re: lets see everyones valve cover..
 

every one already knows that mine are hot pink
http://photos-f.ak.fbcdn.net/hphotos..._2328713_n.jpg
the bottom one is on the talon and the top one will go on the evo and the one on the evo will go onto the hatch
http://i122.photobucket.com/albums/o...o/DSC04475.jpg

Re: lets see everyones valve cover..
 

heres mine
http://i73.photobucket.com/albums/i2...5/DSCF1807.jpg

http://i73.photobucket.com/albums/i2...DSCF1808-1.jpg

http://i73.photobucket.com/albums/i2...5/DSCF1806.jpg

http://i73.photobucket.com/albums/i2...3/DSCF1606.jpg

Re: lets see everyones valve cover..
 

http://i1010.photobucket.com/albums/...0818091047.jpg
http://i1010.photobucket.com/albums/...n/DSC00829.jpg


This is black with rainbow sparkles powder coat, with polished letters, clear powdercoated. Looks cool in person. Thanks primo!

The OP's v/c is really, really cool!

Re: lets see everyones valve cover..
 

Here's my three. Got the shaved polished one on the car now.

http://photos-h.ak.fbcdn.net/hphotos..._4645346_n.jpg

Re: lets see everyones valve cover..
 

http://photos-b.ak.fbcdn.net/hphotos..._3508160_n.jpg

Repainted valve cover in stock color. Bland, but it gets the job done.

http://photos-f.ak.fbcdn.net/hphotos..._2849669_n.jpg

The valve cover from my old Talon before I sold it. I kept it, but then I over torqued when putting it on the VR-4, and cracked it.

Re: lets see everyones valve cover..
 

Here's mine. Nothing too special. I shaved it and painted it gloss red. I also painted my new COP plate wrinkle black.

http://i224.photobucket.com/albums/d...a/P1020788.jpg

http://i224.photobucket.com/albums/d...a/P1020797.jpg

Re: lets see everyones valve cover..
 

I was gonna do something similar to the middle and right one. I have a bare one, but no use for it yet. Planned on painting the center black, shaving everything except the dohc 16 valve (painting that black) and the rest white. Still might happen.

Re: lets see everyones valve cover..
 

Going for the bass boat look kevin? lol

Re: lets see everyones valve cover..
 

I will end up painting it black but I did try to match it to the car. Shaved it myself:

http://www.mitsustyle.com/photopost/.../SDC106481.JPG

Re: lets see everyones valve cover..
 

Yep. I just wanted to stand out. Black was too booring for me.

Re: lets see everyones valve cover..
 

I like kevins vc, it looks great in person. Bass boat hawtness lol.

What does everyone use to shave their vc's?

Re: lets see everyones valve cover..
 

Here's mine, as if it's not seen enough.

http://i48.photobucket.com/albums/f2...8/DSCN0002.jpg

I thought about switching it up, and doing a candy apple red..I dunno yet. Anyone?

Re: lets see everyones valve cover..
 

I used a dremel with a routing or something tip and a sander tip. I've heard of people using some sort of shaving block or something. It's pretty soft material.

Re: lets see everyones valve cover..
 

I used an orbital sander attachment for an electric drill, and did the finishing sanding by hand. 80-120-200-400-600(wet). Prolly overkill but turned out nice.

Swifty, what does, 'as if its not enough' mean?

Re: lets see everyones valve cover..
 

you missed a word in there..SEEN. I'm sure people get sick od seeing or hearing about my whip.

Re: lets see everyones valve cover..
 

Hmm, maybe I'll use an air attatchment to get the majority off (I'm impacient haha) then do your sanding process. Thanks for the input, i wanna do it right.

Re: lets see everyones valve cover..
 

Belt Sander FTW. Easier to get flat with no ripples, and its quick.

Re: lets see everyones valve cover..
 

Believe it or not, I don't think people sit around all day looking at pics of your car, but you must? In fact I can't remember the last time I saw a pic of it posted. ;) Slacker!

That's what I'm saying man, use the attachment w/ various grits and you'll be done in no time, then just do a bit of sanding by hand to finish it off. I seriously spent no more than 15 minutes sanding...stripping it and cleaning it took way longer than the actual sanding process!

Re: lets see everyones valve cover..
 

I'm in the process of sandblasting it clean, got it as a bare vc, thanks for the tip!

Re: lets see everyones valve cover..
 

Thanks scheides, I've cut back on the talk or posting anything about my car. I haven't even updated the project thread in a while either..tisk tisk.

Re: lets see everyones valve cover..
 

You should see the collage I made.

Re: lets see everyones valve cover..
 

I do not look at my own car, I don't need to. I know what it looks like. I was just saying that I don't think there are many on here whom haven't seen it.