Full Built 1ga Part Out!
 

Alright, il try this one more time. The way it will have to work is you let me know what you want, paypal me the cash and i will pick it up when i go home home and bring it to the cities. For the bigger stuff or things i will need help taking out (transmission, engine, etc.) we can meet in Brainerd over a weekend that works for both parties and pull the part(s). Pm me for more info.

Front axles - 50
Three Speed Shatter Shield 100
Rebuilt Driveshaft 50
New Carriage Bearings
New Front Hub Bearings & Seals

BRAKES:
Front Baer Brakes with Slotted Rotors - $550
New rear calipers with Slotted Rotors 75
Front Stainless Steel Braided Brake Lines 30


FUEL SYSTEM:
Supra TT Fuel Pump 80
Re-wire fuel pump relay
3" GM MAF
Braided fuel lines(3) - 65

INTAKE SYSTEM:
Bullseye T04B 50 Trim turbo (oil & water cooled, -10an oil drain) - $500


COOLING SYSTEM:
Alumium Mishimoto Radiator W/Slim Fans (One Puller & One Pusher) - $250
6an turbo coolant feed and return line - 70

SUSPENSION:
Suspension Techniques rear sway bar with Urethane Bushings - 40
New Front & Rear Stabilizer Bar endlinks - 35
RO_JA 18" Formula 5 lightweight wheels with 225/40/18 tires. - $700


AUDIO:
Pioneer head unit with detachable face and CD player with remote control,Polk Audio front and side speakers - 220 for it all

GAUGES:
Autometer Phantom:
30psi Boost/Vacuum Gauge 25
Oil Pressure Gauge 25
Volt Gauge 25
Water Temp Gauge 25
EGT Gauge w/sensor 50
125 for all of them

ELECTRONICS:
New small Battery 25
New Alternator 50
New Coil Packs 25
New Ignition Module 25
New Spark Plug Wires and Plugs(BPR7ES) 25
EPROM ECU with Keydiver Chip reprogrammed for the following; 8000 Rev Limiter NO Airflow CAP No Fuelcut Octane Reset Shift CE Light @ 7000 RPM Enhanced closed loop MAPS Knocksum Gauge 1200cc injectors/264us deadtime 3” GM MAFT 850 RPM Idle 45 PSI AFPR 11.0:1 WOT A/F FED/AWD Locked Baro & Airtem 180

INTERIOR:
Corbeau TRS Seats w/1g brackets - $500

Re: Full Built 1ga Part Out!
 

how much u want for block n head assembled

Re: Full Built 1ga Part Out!
 

how much you lookin to get for the ksports and sway bar?

Re: Full Built 1ga Part Out!
 

Only two people want any of this stuff?

Re: Full Built 1ga Part Out!
 

I would be on that tranny like stink on shit if it wasn't for a 1990...

Re: Full Built 1ga Part Out!
 

Um, thats a 91+ transmission there buddy :)

Re: Full Built 1ga Part Out!
 

where does it say that?

Re: Full Built 1ga Part Out!
 

I installed it. Its a 91+ you have my word.

Re: Full Built 1ga Part Out!
 

PM'ed

Re: Full Built 1ga Part Out!
 

Put up some pictures of those seats! or email them to me! kj182@msn.com

Re: Full Built 1ga Part Out!
 

http://www.mitsustyle.com/forums/showthread.php?t=21536

Look at the bottom of the page.

Re: Full Built 1ga Part Out!
 

Is the dnp header one for an internally wastegated turbo? Can I use it with my Evo3 and on my 7bolt head?

Re: Full Built 1ga Part Out!
 

Are you located in Brainard, or can pickup be arranged in the TC metro area?

Re: Full Built 1ga Part Out!
 

Could you do 250.00 picked up for the Megan exhaust? I could come to you. Thanks.

Dan

Re: Full Built 1ga Part Out!
 

Willing to sell just the slim fans?
If you are, PM me a price

Re: Full Built 1ga Part Out!
 

I wonder if those brakes would work with my 16x8" Kosei K1's...also, wanna seperate that tree-speed scattershield?

Re: Full Built 1ga Part Out!
 

Do you still have the stock radiator harness? The plug wire that connects to the radiator fan from the fuse within the engine bay.

Re: Full Built 1ga Part Out!
 

how is the smim setup, more for street use or track use, what about the throttle body? and coil relocation bracket

Re: Full Built 1ga Part Out!
 

I am located in Brainerd, but i could bring parts to people at the cookout, just need to be paypal'd ahead of time. That would work the best for me, and im sure most of you will be there anyways.

Re: Full Built 1ga Part Out!
 

$20 for the volt gauge? Picture?

Re: Full Built 1ga Part Out!
 

do you still have the crank and pistons? if so price?

Re: Full Built 1ga Part Out!
 

pmed.

Re: Full Built 1ga Part Out!
 

Nothing sold yet

Re: Full Built 1ga Part Out!
 

Intercooler and piping is gone. Everything else is still for sale

Re: Full Built 1ga Part Out!
 

Make me some offers! I want to get rid of this thing!

Re: Full Built 1ga Part Out!
 

ttt

Re: Full Built 1ga Part Out!
 

Do you by chance have a 4" intake pipe? If so what kind?

Re: Full Built 1ga Part Out!
 

What do you want for the
Fuel pump
8an line
And the gas tank

Re: Full Built 1ga Part Out!
 

Is the oil gauge electronic or mechanical..
How much for that and boost

Re: Full Built 1ga Part Out!
 

pm'd

Re: Full Built 1ga Part Out!
 

Really need money right now, everything but the intercooler is still here. Hell, i will even take offers on the whole car. I am really only trying to sell the stuff i have listed at this point though, not really wanting to mess with the little stuff yet.

Re: Full Built 1ga Part Out!
 

how much for the rear calipers, rebuilt driveshaft and carrier bearings?

Re: Full Built 1ga Part Out!
 

Will ask a 2nd time
Gas tank
Pump
Fuel lines
Price

Re: Full Built 1ga Part Out!
 

PM'ed

Re: Full Built 1ga Part Out!
 

Can I get the Megan Strut tower bar please?

Re: Full Built 1ga Part Out!
 

I want the 4-bolt rear and axles. I'm also interested in the transfer case. PM'd

Re: Full Built 1ga Part Out!
 

is the clutch and flywheel still available? also interested in fpr

Re: Full Built 1ga Part Out!
 

Interested in the front clear lens on the car. I know you don't want to part those out but I really need them!!!

Re: Full Built 1ga Part Out!
 

Does this car have a factory sunroof?

Re: Full Built 1ga Part Out!
 

No sunroof. Everything is still available, pm me if interested. BTW, the car is located in brainerd and all the parts are still on the car. I am in minneapolis, so I will have to make trips up there to get parts.