|
Project P00n (Exotic Killer)
I'll update this later, but wanted to start the thread. I have some dyno graphs on this car and I'll post the mod list right now.
Current mod list: Greddy Turbo Timer TurboXS Manual Boost Controller Buschur Catback 3" Exhaust Trustz Blue Gauge Overlay Ferodo DS-2500 Brake Pads Rotorpros Crossdrilled/Slotted Rotors FF/MAP Ported coated black Exhaust Manifold K&N Typhoon Intake AMS Mini Battery Kit K&N Valve Cover Breather Filter 255 Walboro Fuel Pump Grouppe-S 3 55mm Gauge Pod Buschur Manifold Cover AMS Front Mount Intercooler 52mm Prosport Gauges (EGT, Boost, Fuel Pressure/Temp) Rexpeed CF Gauge Overlay Rexpeed Gourney Flap Buschur Shifter Bushings Kracka Vents (you know it!) Lilliput 7" LCD Touch Screen HP Laptop for carputer core Horse Power Freaks LICP Smoked Sidemarkers 360gram Shifter 250GB Drive Nisie UICP Carbon Fiber Headlight Eye Lids 1st Tune @ DB Tuning 04/26/08 (304WHP/296FTQ) Tien S-Tech Lowering springs RRE X-Clutch 3000 MAP 2.5/3" O2 eliminator down pipe Autometer Single Gauge Pod BLOX Motor Mount Buschur Bullet Test Pipe FIC 850cc Injectors Evo VII Center Console with custom routing for iPhone Mild ported turbine housing Added: 07-02-09 (Thank you Hughes and Scheide for all your help!) (MAP) Stage 3 Ported Head/5 Angle Valve Job (MAP) Version 2 Ported/Coated Intake Manifold (Mil-Spec) Ported 65mm Throttle Body (MAP) Intake Manifold heat barrier gasget Shifter Base Bushings ARP Head Studs FP4R Cams/Springs GM Air intake Sensor To come later: Samco radiator hoses LC-1 Wideband 4 Bar MAP Goal is 400AWHP on MAP's dyno. Hughes and I have high expectations of this car, only because we've put so much work into it and he knows I'll go on a killing spree if it doesn't perform well. It's beaten DB9's, Ferrari 430's, Porsche GT3s, etc. I'm just tired of losing to Vipers so hopefully this will get me to where I want to be, if not... it's time for a BBK Lite (or most likely an FP White) and a 9000 RPM redline. Carputer/Gauge Setup. http://photos-h.ak.fbcdn.net/photos-...20031_1307.jpg Evo VII center console http://photos-e.ak.fbcdn.net/photos-...52_8093492.jpg Car in front of my workplace in Texas :) http://photos-c.ak.fbcdn.net/photos-...90090_6773.jpg Car downtown for lunch at the Lyon's Pub http://photos-e.ak.fbcdn.net/photos-...04_3251235.jpg Car at my house in Texas EV0 FTW son. http://photos-c.ak.fbcdn.net/photos-...84978_8238.jpg MAPerformance's awesome ported exhaust manifold. http://photos-f.ak.fbcdn.net/photos-...21197_5864.jpg Scheides porting my turbine housing http://photos-f.ak.fbcdn.net/photos-...17717_8436.jpg Block cleaned.. http://photos-d.ak.fbcdn.net/hphotos..._4460422_n.jpg Polished AMS FMIC http://photos-d.ak.fbcdn.net/hphotos..._7529884_n.jpg Head almost put back together with FP4Rs after MAP's porting job. http://photos-b.ak.fbcdn.net/hphotos...1_436606_n.jpg |
Re: Project P00n (Exotic Killer)
Lite? Weak souce ;)
I like the list! |
Re: Project P00n (Exotic Killer)
400HP with E85? or do you wanna stick to 91-92-93 octane pump gas?
Nice mod list too |
Re: Project P00n (Exotic Killer)
3 bar MAP? 3 bar is only 43psi... Weak, son.
|
Re: Project P00n (Exotic Killer)
I'm guessing pump gas, a well setup evo can hit 360-ish whp on MAP's dynojet pretty easily.
|
Re: Project P00n (Exotic Killer)
^^OK, but an even better set-up pump gas Evo can hit about 394-ish on DB's dyno!! Not with a stock turbo though...
|
Re: Project P00n (Exotic Killer)
Why go with the lite when you can just get the full.
|
Re: Project P00n (Exotic Killer)
Quote:
|
Re: Project P00n (Exotic Killer)
Quote:
|
Re: Project P00n (Exotic Killer)
project POON..I love it! Remember..crank it up with youporn on the tv ;)
|
Re: Project P00n (Exotic Killer)
Quote:
|
Re: Project P00n (Exotic Killer)
BBK Lite because I want great throttle response with a bit more power, 3 Bar MAP mostly for logging, Youporn FTW!
And yeah to clarify 400AWHP on MAP's dyno with a stock turbo/pump gas is my goal. I'm shooting for the stars gentlemen! |
Re: Project P00n (Exotic Killer)
We can do it! 400whp on a Dynojet is a large goal on pump, but my fingers are crossed that we'll hit it and we'll definitely do everything possible to get in there. In about a month this car will pretty much be a fully prepped maxed out stock turbo Evo; only thing left untouched will be the short block. If we don't hit 400whp with the stock turbo, the BBK Lite will definitely be the little extra nudge you need. BBK Lite is a good choice b/c it flows more air up top than the stock turbo while maintaining the stock spool and response characteristics. This car will be one hell of a beast and I'm really looking forward to having it done. I expect nice fat 4k RPM wide powerband from 3k to 7k RPM's with a rev-limit set in the range of 8k or so.
|
Re: Project P00n (Exotic Killer)
Polished/de-badged the FMIC, relocated some stuff, made a nice bracket for the carputer monitor, cleaned up some wiring for the gauges and polished the block for the new head gasket today.
Picking up parts from mitsu tomorrow and then waiting patiently for MAP to get my stuff ported. Stuff still to do: Full detail of engine bay Move EGT gauge wire Weld front struts from Mitsu's fuckup Fix battery tray Install wiring for radar detector Seal Grommet so the same thing that happened to Scheides doesn't happen to me. I have a busy week coming up. |
Re: Project P00n (Exotic Killer)
what kind of car is this? pics?
|
Re: Project P00n (Exotic Killer)
Its his '06 Evo IX MR.
|
Re: Project P00n (Exotic Killer)
You should spend less money on things like porting, valve jobs, throttle bodies and cams (seeing as how the stock mivec cams rock)
A new turbo would be a better hp/dollar investment. |
Re: Project P00n (Exotic Killer)
I'd like a ride when it's done.
|
Re: Project P00n (Exotic Killer)
Quote:
edit, shawn post pics of the block, let's see how clean you got it! |
Re: Project P00n (Exotic Killer)
Well after a LOT of hard work and waiting we got it all put back together. Hughes stayed in town a day later to help me out. Bob worked to get my stuff done last Monday and on Thursday we fired it up. Everything in the engine bay is cleaned, I spent quite a while on it, all wires are tidied up and I'm VERY happy with the results. MAP's porting job as always was stellar, just took a LONG time :) and the car runs great.
First time ever doing anything like this, but as soon as the fuel pressure built again everything worked perfectly. We broke in the cams, drained the oil and put in new oil/filter and it was on it's way. I did a compression test today and it's 130 or so all away across the board, so it was obviously the head that was causing it. All I can say is I'm a VERY VERY VERY happy man and I love my Evo again and I'm proud of my friends and I's effort and hard work. A BIG fucking thanks to Hughes for all of his hard work and dedication, the man had my car running with one tune and he also helped me with most of the labor and choosing of parts/services and thanks to Scheides for all of his help with the block and timing belt stuff! Also without Mark's tensioner tool my car would have probably blown up, so thanks for letting me borrow that too man! |
Re: Project P00n (Exotic Killer)
Woohoo! Glad you got it running man, now get it on the dyno and let it be all it can be :D Talk about a freaking maxed out stock turbo setup on pump gas, this thing should kick ass.
|
Re: Project P00n (Exotic Killer)
Way to go. To bad it took a while to get stuff back
|
Re: Project P00n (Exotic Killer)
Definitely a successful project! Car feels good and has a nice fat powerband; a great street/autocross setup.
|
Re: Project P00n (Exotic Killer)
Quote:
|
Re: Project P00n (Exotic Killer)
Yeah it's really really hard to not drive it, I put about 350 miles on this weekend! The powerband is AMAZING I effin' love the car!
Haha, I'm not sure if it's your tool Kevin, I think Mark made it, he said something about making it at his job. I have no clue, all I know is it did the job! |
Re: Project P00n (Exotic Killer)
http://sphotos.ak.fbcdn.net/hphotos-..._1100965_n.jpg
Been a while since I've updated this thread as I've just been enjoying the car's awesomeness for the past year. But in the upcoming months I'll be figuring out the broken tranny situation. I was going to have MAP store it and work on it, but they didn't have room and Shep doesn't do 6 speed fixes so for now it's sitting in my garage :( I'm tossing around a lot of options right now, but http://teamrip.com/ seems to be a good option for rebuilding my tranny, I'm also thinking about pulling it myself but may pay MAP or someone to do it still. I know it's a PITA but there's noway it's any worse than what I just endured. Any ideas/options people have would be great. A 5 speed swap would be sweet too, but that's looking like it'll cost a LOT more and be a lot more of a PITA than just rebuilding the 6 speed to be strong. |
Re: Project P00n (Exotic Killer)
You know my vote; keep the 6!
|
Re: Project P00n (Exotic Killer)
I thought shep was only a few months out on the new 6-speed gearset/ final drive?
|
Re: Project P00n (Exotic Killer)
Pull the tranny yourself and save money! I know you can do it!
|
Re: Project P00n (Exotic Killer)
It is rather easy to pull an evo tranny, now that I've done it once on my IX, once on scheides X, an about to be a second time on my IX this winter. Just make sure you have a slide hammer to pull the input shaft once you pull the driver side axle and after that its like 9 bolts. If you want help I'm down :D
|
Re: Project P00n (Exotic Killer)
I would go through TRE again in a heartbeat, even though I have driven my TRE trans a grand total of 4.3 miles so far, after talking to him, and the other tranny re-builders in the biz (Shep, Jack, and Jon @ TRE) Jon seemed the most knowledgeable to me. Plus he shot peens all his stuff standard, which none of the other guys do. I don't think Jack even does 6 speeds. How bout Buschur? Does he still do his Bushwacker trannies, or does he do 6 speeds? AFAIK, Shep only does stock rebuilds on 6 speeds also, or he can convert it to a 5 speed for $450 extra. Good luck man.
|
Re: Project P00n (Exotic Killer)
I'd say jacks transmission they seem to be one of the best on their customer service and builds, they are also trying to invent new things for the transmissions in these cars which makes me think they want to stay around a while.
TRE was good when I wanted to buy something from him, but after I had the trans in my hand he was impossible to get a hold of again. |
Re: Project P00n (Exotic Killer)
Time to bump this. Not because of something awesome or good. A few things went down which most of you already know the first which I'll touch now.
Back in Fall my shift fork broke and I had to limp it back to MAP. They couldn't touch it due to it not being a serviceable item, which is definitely a good reason not to touch something. Shane @ DB says it should be doable so I was planning on getting it towed there early next week which brings me to topic two... read on. Thursday night my roommate (Shane a lot you know him), left the garage door open... for about a day. Needless to say people ransacked my car and stole a lot of stuff, just a few days too late I guess. In doing so, they also destroyed a lot of the car. I would assume they're young because they didn't think to look for a trunk release!? So they tore up my rear seat and also the keyhole on my trunk looks like someone shot with a shotgun point blank and they also managed to break my spoiler in half. Good times. I'm sure there's more damage but my garage is dark and well, I can't move the car. The items they stole was my p600.2 rockford amp, my computer screen, I'm sure my computer however I forgot to look, my custom enclosure and my sub. A little over $1200 in stuff, excluding my deductible for the damage to the car. $MD just can't win can he. |
Re: Project P00n (Exotic Killer)
Holy shit! That really sucks :(
|
Re: Project P00n (Exotic Killer)
God Damn it, it just makes me sick when I hear about shit like this. People just can't have nice stuff without some douche bags stealing it. This sucks big time. Just hits close to home as I just had some stuff stolen from my fenced in back yard of my shop.
|
Re: Project P00n (Exotic Killer)
WTF?
Sorry to hear. |
Re: Project P00n (Exotic Killer)
Wow man, really sorry to hear that :( This is about the worst news I could read in this thread.
|
Re: Project P00n (Exotic Killer)
Fuckin people. Sorry to hear man :( Have any pictures of the damage?
|
Re: Project P00n (Exotic Killer)
Wow, that's super shitty dude. Sucks that people feel a need to steal stuff and destroy things that others take pride in.
|
Re: Project P00n (Exotic Killer)
Sorry to hear it, thieves really suck.
|
| All times are GMT -5. The time now is 03:26 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.