MitsuStyle - TDO6 Frank 4 60 trim w/o2 housing and WG

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Mitsu vehicle parts for sale (http://www.mitsustyle.com/forums/forumdisplay.php?f=78)

- - TDO6 Frank 4 60 trim w/o2 housing and WG (http://www.mitsustyle.com/forums/showthread.php?t=23167)

TDO6 Frank 4 60 trim w/o2 housing and WG

Edited. Back up for sale

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Seems like a good deal, but does power steering need to be removed for it to work? The wastegate seems to stick out quite a bit. I don't need a turbo, but it would probably be good for other members to know.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

it does look like PS would need to be removed. I tried a friends 44mm tial wg and it seems i had to remove the PS. ...man...this turbo system is tempting. is there any lines coming with the turbo?

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Not 100% sure about the power steering. I did a mock up and it looks like it might clear the p.s. The wg doesn't go straight into it, goes under, but it would be a tight fit. Has a couple lines; one is bent(water line) the other is an oil feed line from the head. All of your stock lines will bolt right up though.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Um, I need a WG and 02 housing pretty badly lol, im gonna come take a look tonight, cash in hand

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Everything is still here.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

what are you looking for in trades

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

If I sell my panda. I may be getting a hold of you!

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

I have a 4bolt sitting here

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Bump, still have it.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

This a mitsu housing? Any stats? I'd be interested, but dunno if it's too big.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Looks like a mitsu flange, also looks to be a couple of cracks in the turbine housing.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Yep mitsu housing. Stock lines bolt up; may have to bend the water feed. There isn't much info on the frank turbos, but it's said the comp wheel can do up to 50lbs per min. It's similar to the fp green, a little slower spool because the frank turbos are outdated. Obviously spool time varies from setup to setup but the frank 4 would be around 4000-4200. These were the models that came out before the green and red.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Bump, still have this

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Bump, make a reasonable offer

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Bump, bump the thread, bump it up, get this thread bumpin.

I'm not looking for any trades.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

I see I deleted all the info on the first post.

Tiny bit of side to side shaft play, but will go away once oiled.

Has a clipped tdo6 turbine wheel
Garrett e60 compressor wheel
3" inlet
40mm hks wg w/15lb spring
3" o2 housing

http://www.turbochargers.com/tech/

Rated at 750cfm, fp green is at 730.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

im interested, let me see what all i can sell to get some cash would you take any trades?

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

Quote:

Originally Posted by matt j (Post 309787)

would you take any trades?

Quote:

Originally Posted by 2bar1g (Post 309776)

I'm not looking for any trades.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

No trades. I don't own a dsm and don't plan on getting back into them for a while. I'd say this a pretty good deal for someone, considering I'm losing a few hundred off it.

Re: TDO6 Frank 4 60 trim w/o2 housing and WG

I still really want this.. I'm thinking of putting my new rebuilt small 16g up for sale but I'm not sure. Would you do a payment plan? haha

Re: TDO6 Frank 4 60 trim w/o2 housing and WG