Spring Dyno Day Mods! Who's doing what!?!?
 

I'm toying with the idea of dynoing my evo, still not sure. If I do, it will be interesting.

Last dyno @ DB, 304whp @ 24.5psi on 1/2007

Since then added:
SS o2 housing
Ported turbine housing
Ported Exhaust manifold
IX turbo
GM BCS, upped to 26psi
Ported intake manifold
65mm throttle body
Kraka Vents (TM) ;)

I have an evo X MAP sensor on order. If it comes in time, I might make the plunge!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Hmmmm...nothing!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I am going to add an O2 housing, cone filter, and hopefully some decent cams.

Scheides, I need your help with my ECU. :D

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Sine the last time may car was dynoed (222 fwhp pump gas) this is what has been added:

e85
built bottom end
60mm throttle body
Hanh S20g Turbo
Hahn 3" Downpipe
Hahn 3" Racepipe
Thermal Research 3" Cat Back Exhaust
Greddy Type-S BOV
Greddy Profec B-Spec II
Aeromotive 1:1 FPR
Walbro 255lph Fuel Pump
Accell In-Line Fuel Pump
Ross Racing -6 AN fuel rail
880cc Injectors
Megasquirt
Crane #14 Turbo Cams
Crane Valve Springs
Crane Titanium Retainers
3.55 Trans
Quaife LSD
Spec 5 Clutch

I'm interested to see what it'll put down

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

My car: nothing
My bike: Never been on a dyno, so it'll be interesting.

If weather permits, I'll be bringing the bike.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

we'll see how my car is running by then but nothing special just same old stuff.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

if I have time to do it
8an fuel lines
and a quick street tune.
other wise the car will not hit the rollers

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Last time my car put down 282.2 @ 20 psi at DB

I hope to be able to walk within the next week and get my 3" Megan TBE w/ test pipe and LIPP cast o2 Housing on by dyno day.

That would be to replace my ported 2g o2 housing, my 2.5 inch downpipe, and really restrictive 3" pressbent exhaust that has many bends in it.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'll finish putting in my front components, mount the amps and build a custom box for the subs.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Wow i didnt know they were having Db Drags as well. lol

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

If I dyno. New Mods will be 150# injectors and a 30+ psi street tune. hopeing for 500+ FWHP

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Last time at the dyno i put down almost 300, so this time with all the mods i am hoping for a little more.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I got a new turbo and a new clutch that will hold my power on the dyno now. Hopefully its done by then.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'll hopefully be getting some fresh paint, and a rent-tux. same day as prom woo!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'll be running my craptastic tune for Holiday winter E85. I made 380whp last time, will be less this time

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I won't be there to shit in everyones wheaties like 2006 :)

Good luck everyone!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

last time I dynoed I made 265awhp. Since then I've added a bigger intake and a new clutch. If I decide to put my 1000s in I'll be running e85, but I'm really having a hard time deciding if I want to or not. idk if making more power is worth breaking more things lol.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'd say throw the 1000s on and let er buck with some e85. With the power you are making you shouldn't have to worry about breaking parts. Maybe walking a crank though! :D

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

^main this is idk if I want to go through with all that. When I go to sell my car idk if it'll be easier or harder to sell a dsm on e85 or not. idk we'll see.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

never know.. might be easier. If i can get the talon fixed by then i believe ill try and bring my 91 Talon Awd - pte50 trim- 660's. afcII - 23psi ect. New clutch , master and slave. Also hopefully getting the turbo rebuilt by then, have a quick street tune and let her buck.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I plan to install my JMF intake, 255 fuel pump, and get a base tune in link. Plus a few other little things like set base timing and the TPS.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

well the car runs now to see if I want to put it back on the rollers.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Good to hear craig! That was quick too, hope they cover that under warranty for ya.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Quit living in the past! :P :lol:

Too bad, I'd like to see your car again hopefully soon!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

LOLOLOLOLOLOLOL!!!! That ONE day the car was running was pretty sweet man!

Can I just say that I've driven my car, 2G and Evo every day since the day your car was on the dyno that day....it I'm making ~300whp (average) x 350 days (take out a few for the minimal downtime I did have) x 2 years, I have put down 210,000whp over that time, or 350x more power than your stealth :)

Told you you should have kept it a street car! E316G's FTW! ;)

(I just went back and read that, and it sounds a little harsh....don't take this too harshly swanny!!! :) :) :) )

Seriously though boys, anyone planning on having their cars running, you better be planning on working on them THIS weekend, and get them buttoned up NEXT weekend, because the dyno day is in TWO WEEKS! If you need help, just ask, but please don't show up to the dyno day with your car on fire!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Its gone! Maybe Swanny will finally learn to keep a car drivable ;)

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

DO IT, let's see the power the beast is putting down now!

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Hahaha, I remember that happening at the first Dyno day I attended at LSE's location in Maple Grove, good times.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

HAHA yup it was Brownman's car b/c his dipstick blew out.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Wow, missed that one.

Got the new bumpsticks, now to get them installed.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I have learned from that, i got a new dipstick and i crush the top of the tube just a little bit.

Also i don't eat wheaties.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I need to do a timing belt before May 3. Maybe have a timing belt and cam install get together?

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Cams are going in tonight. :P I'm always willing to help when you are ready to replace the belt.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

lol, cams are the shit.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

Ah memories...

God looking back that was hilarious when your 1G showed up on fire. :D

I thought it was a joke when you came around the corner and said "Hi guys my car is on fire." You had a big grin on your face, totally didn't believe you at first.

Good thing there wasn't much for damage.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

The dyno days are usually the funniest events we have. Odd surprises, dissappointments, and war stories!

Schiedes, the car ran for much more than a day, remember I spun all those 11 second passes you have yet to get close to? ;)

It is all in good fun guys (the ribbing), it is why I am still around here. Maybe by the next event I'll have my 2wheel toy to dyno. I doubt that will come close to breaking triple digits.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

2 wheels?

yeah i am glad it didn't do much damage just a big mess. Still dyno'd that day.
11 sec passes, easy stuff, apparantly you can touch 11s with a huge boost leak. :op

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I stil plan on attending the dyno day on the 3rd. Buttoned TONS up over this weekend..just gotta get my A1's now into the car, and get my upper ic pipe made..then it's changing the map in the AEM and figuring out what I'll do for a fuel return.

-A. Swift

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

stock line.
Be nice to see your car again.

Re: Spring Dyno Day Mods! Who's doing what!?!?
 

I'm a huge tool.

I rounded off the MIVEC cam gear bolt and had to run to the store to buy "bolt outs" impact sockets. They worked like a charm, a little dremel work on the rounded bolt and I'm back on the road!

Idle has that nice big cam sound, turbo seems to spool even quicker. I'll play with the car more tonight after the Wild game.

BTW, new MIVEC cam gear bolt is $3 the MIVEC cam gear is $370!