MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   Need ideas for my Gs-T... (http://www.mitsustyle.com/forums/showthread.php?t=14113)

98gstaherns 01-14-2007 10:02 PM

Need ideas for my Gs-T...
 
So I'm just been thinking about what kind of set up i should start to plan out for my car. Right not now it doesn't have too much besides a 14b, 3in turbo back exhaust no cat, Mbc and a Southbend DXDSS. Those are really only the main things. So I'm just kinda wondering what some people think is a good FWD setup.
I was thinking along the lines or a 16g with supporting mods and a Fmic. Also maybe some kind of suspension set up and motor mounts also to try and stop from getting wicked wheel hop. After reading that Masters of all that is fast thread seems like he made some good numbers with it.. http://www.mitsustyle.com/forums/showthread.php?t=14082
But I dunno Ive had lots of ideas for the time ive had my Dsm and I'm still learning alot. I really would like a setup that is a good DD but I could also go out to the strip and have some fun too.

JET 01-14-2007 10:20 PM

Re: Need ideas for my Gs-T...
 
Stick with the 14b for now, not much difference to a 16g. Get DSMlink, fuel pump, injectors and a FMIC. After that look for a bigger turbo.

98gstaherns 01-14-2007 10:23 PM

Re: Need ideas for my Gs-T...
 
yea I was planing on doing it all at once. Fmic Fuel and hopefully Dsmlink if I can find a Eprom. I just don't know what turbo to use..

tim 01-15-2007 03:06 AM

Re: Need ideas for my Gs-T...
 
Quote:

Originally Posted by JET (Post 174190)
Stick with the 14b for now, not much difference to a 16g. Get DSMlink, fuel pump, injectors and a FMIC. After that look for a bigger turbo.

I agree 100%. The big 16g is a great turbo but you already have a 14b. Might as well get a front mount and prepare for a 20g or 50trim. Get the fuel and the management and then upgrade to a bigger turbo.

Lag isnt always that bad with a FWD, remember that.

HiImBrian 01-15-2007 03:15 AM

Re: Need ideas for my Gs-T...
 
I was thinking about this same thing when I got my gsx. I think the most basic setup is a 16g with 660-720 injectors, a walbro 255, fmic, exhaust, dsmlink, and some suspension work. I've got all the suspension you need for 450 (tokico shocks, springs and camber kits). Hope this helps!

98gstaherns 01-15-2007 09:02 AM

Re: Need ideas for my Gs-T...
 
Quote:

Originally Posted by Mr.98GSX (Post 174214)
I was thinking about this same thing when I got my gsx. I think the most basic setup is a 16g with 660-720 injectors, a walbro 255, fmic, exhaust, dsmlink, and some suspension work. I've got all the suspension you need for 450 (tokico shocks, springs and camber kits). Hope this helps!

^Do this but replace a 16g with a 50trim or somthing along those lines. This isn't gonna be buy all the parts over time thing. This is something i wanna go to one of our shops on here and have done.

Enes 01-15-2007 11:41 AM

Re: Need ideas for my Gs-T...
 
fiddy is good for a fwd.. i likey mine...

-E

HiImBrian 01-15-2007 12:03 PM

Re: Need ideas for my Gs-T...
 
It's good to have goals set as well. Like how much power you are shooting for and whatnot. For a dd I am shooting to hit 300awhp. With my current setup (listed above) I know I'm going to fall short, so I'm also getting a built head w/ cams. It's all a preferance thing. Just make sure you fix anything that needs to be fixed before you try to make it some power monster.

98gstaherns 01-15-2007 12:06 PM

Re: Need ideas for my Gs-T...
 
Oh yea i plan on doing anyother things too.. I would like to see somthing around 300 whp.

HiImBrian 01-15-2007 12:15 PM

Re: Need ideas for my Gs-T...
 
Yea from what I have read, upgraded fuel system, bigger turbo, and all the supporting mods including dsmlink will put you around 250-275 whp. This is talking 650-720cc injectors. This is very debatable and a definite ballpark number. I'm just saying, I don't plan on hitting 300awhp with my setup, that's one of the reasons I am deciding to build up the head. Any these guys are right, I would probably start off with a bigger turbo if I were you.

98gstaherns 01-15-2007 12:17 PM

Re: Need ideas for my Gs-T...
 
Yea have after what some people have said and what Ive read a good 50 trim setup would be nice.. Also thinking about internals and some head work and Cams..

HiImBrian 01-15-2007 12:44 PM

Re: Need ideas for my Gs-T...
 
I agree. Great minds think alike I guess. I wish I would have gotten a bigger turbo. I am planning on doing that if I don't make 300awhp after I get my built head on.

JET 01-15-2007 02:04 PM

Re: Need ideas for my Gs-T...
 
Don't bother with internals, they can take over 500 whp stock. I would look at a BS removal for reliability sake though. I wouldn't mess with a ported head either.

98gstaherns 01-15-2007 02:35 PM

Re: Need ideas for my Gs-T...
 
Ok.. What does Bs removel do? Thats the blance shaft?

bluntedelvis 01-15-2007 02:58 PM

Re: Need ideas for my Gs-T...
 
300 hp is achevible with an Evo 3 16g isnt it

Jakey 01-15-2007 03:40 PM

Re: Need ideas for my Gs-T...
 
Quote:

Originally Posted by 98gstaherns (Post 174311)
Ok.. What does Bs removel do? Thats the blance shaft?

For reference, the 1G removal:
http://www.vfaq.com/mods/balance-shafts.html

Quote:

Originally Posted by bluntedelvis (Post 174315)
300 hp is achevible with an Evo 3 16g isnt it

300 whp has been put down with a 14B, although I can't remember what dyno it was on. I saw the dyno chart posted on Toonerz a couple of years ago.

Shane@DBPerformance 01-15-2007 03:45 PM

Re: Need ideas for my Gs-T...
 
My girlfriend's 14B put down something like 296whp on a Dynojet. That was with race gas, a few basic mods and no fuel control. You can put down around that much with a 16G on pump gas with a strong car with the right mods.

HiImBrian 01-15-2007 03:59 PM

Re: Need ideas for my Gs-T...
 
It's been done on a mustang dyno, but it's not easy.

98gstaherns 01-15-2007 05:01 PM

Re: Need ideas for my Gs-T...
 
Quote:

Originally Posted by Jakey (Post 174322)
For reference, the 1G removal:
http://www.vfaq.com/mods/balance-shafts.html

Thanks!

tim 01-15-2007 09:29 PM

Re: Need ideas for my Gs-T...
 
Quote:

Originally Posted by ecoli (Post 174324)
My girlfriend's 14B put down something like 296whp on a Dynojet. That was with race gas, a few basic mods and no fuel control. You can put down around that much with a 16G on pump gas with a strong car with the right mods.

Girlfriend, didnt you get married?:)

98gstaherns 01-15-2007 09:41 PM

Re: Need ideas for my Gs-T...
 
never hurts to have some extra loving! lol

Shane@DBPerformance 01-15-2007 11:05 PM

Re: Need ideas for my Gs-T...
 
Quote:

Originally Posted by tim (Post 174364)
Girlfriend, didnt you get married?:)

Yea, I keep forgetting that.

Goat Blower 01-15-2007 11:22 PM

Re: Need ideas for my Gs-T...
 
Don't let her see that.

tim 01-16-2007 02:14 AM

Re: Need ideas for my Gs-T...
 
Quote:

Originally Posted by ecoli (Post 174369)
Yea, I keep forgetting that.

Thats what I figured. Just had to point it out.


I have some friends that are in the same boat.


All times are GMT -5. The time now is 07:41 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.