Need to shut up Mustang buddies
 

All my close friends are car guys and we are always giving each other crap about who's gonna be quicker. Well 2 of them own mustangs, one a '95 GT with dart heads, bbk headers, almost every bolt on. The other '02 GT every bolt on plus header back exhaust and soon 3.73 gears. Well these guys don't think that our Talon (My brother and I) is worth shit, i finally had enough of them and i will be throwing some major work into this thing in the next month.
My question to you all is, What mods do you think i need? I would like input from you all because you all have way more experience than me, and i do respect a lot of you and your cars.
The car is 100% stock.
These are my plans in the next few weeks:

Boost Gauge, EGR blockoff, remove emissions/vac lines.(have on hand)
Brakes.
Passenger side axle & driver side ball joint (needs)
Replace tranny & T-case with redline
Cheap Rims (has crappy rims & tires right now)
Jet 3" exhaust
DSMlink
GT Exhaust Mani, EVO 3 16G
Walbro 255 & Aero AFPR

Am i missing anything? Any helpful input is appreciated. Also if anyone knows where i can get any of these things for a good price let me know.
Thx Aaron
(Sorry for length, needed to tell someone who isn't V8 anal)

Re: Need to shut up Mustang buddies
 

Injectors, at least 550's,

2g MAF.

FMIC.

Boost controller.

Also personally Id skip the exhaust manifold, just get a 2g and port it.

Re: Need to shut up Mustang buddies
 

Sounds like a good start, may want to add injectors to that list. I'm not too sure on how much power is added with heads n all that crap on stangs. But I did race a few stock stangs with my exhaust a BCed 14b and smoked em. Good luck.

PS if you ever want someon to shut them up for ya, holla.

Re: Need to shut up Mustang buddies
 

Pm'd you about most of those parts.
;)

Re: Need to shut up Mustang buddies
 

ugh, get out the umbrellas, i forsee a piston shower in the near future.

Re: Need to shut up Mustang buddies
 

Get an intake, exhaust, clutch, MBC, Free Mods, and some race gas and you'll give them a run for their money if you can dirve.

Re: Need to shut up Mustang buddies
 

OR BUY a mustang :) jk.... sorry...

Re: Need to shut up Mustang buddies
 

Just get 3" exhaust, race gas, and turn up the boost to 17psi.

Re: Need to shut up Mustang buddies
 

That won't help him much against a heads/cam (I'm assuing) mustang.

Re: Need to shut up Mustang buddies
 

How about something to control fuel for the larger turbo, larger suggested intercooler setup, better flowing exhaust sytem, more boost, and larger fuel system?
::sigh::

Re: Need to shut up Mustang buddies
 

You guys don't know anything I swear. All you need is a RWD conversion, some Volks, and a pinkyS10 suspension. You'll be the king killa, big wheela, cat peala

Re: Need to shut up Mustang buddies
 

Hahahah, you just went ICP of his ass!

The PinkyS10 suspension is a good idea though. Front, back, side-to-side Balla!

Re: Need to shut up Mustang buddies
 

Thanks all for the input. Swanny i think the DSMlink will be able to manage that stuff.
Thx Ju-on and S2Kracka, obviously you guys know whats up. (Ju-on did u want those lenses?)
Well i am gonna have to do just basic mods for now, my idiot brother got suspended from work, so now i have to provide/do everything. I should be stopping by LSE tomorrow afternoon, if thats alright. I have to pick up some redline.
Oh yeah, my car is a '92 AWD, 5 spd. Thats looks completely brokeass, just ask the LSE guys.
Thanks again will keep you all updated on "Project dsmstyle/stang killa"

Re: Need to shut up Mustang buddies
 

So what can a "heads/cam" POS do? I'm thinking mid 13s? I know some leg humper will say 11s but that's just crazy.

Re: Need to shut up Mustang buddies
 

10's, but only if its white.

Re: Need to shut up Mustang buddies
 

9's. Don't hate.

Re: Need to shut up Mustang buddies
 

King Killa, Big Wheela, Mustang Peala!!!

Yes I want that lense! You didn't respond to my offer? Is that a good price for you?

Re: Need to shut up Mustang buddies
 

Mid 13s might be a little high, I was thinking more really high 12s or low 13s.

Re: Need to shut up Mustang buddies
 

We have a 3" buschur exhaust for sale. (catback, test pipe and downpipe) for a 1g awd. $400 for it

Re: Need to shut up Mustang buddies
 

Shit, when I was in HighSchool, you know I was down with the clown!

Re: Need to shut up Mustang buddies
 

I totally missed the DSMLINK on my list, I guess thats why I went home at 3pm for a "nap". My bad.
I won't erase my post, that'll show everyone what happens when you go straight to work from off the plane :(.

Re: Need to shut up Mustang buddies
 

Update!! Well last week i did almost everything on the king killa, Cat Peala. All thats left is an alignment, then the car will be back to perfect stock condition. I hope to put in an MBC, shifter bushings (both sets) & K&N FIPK this weekend, along with a few other free mods stuff. I am waiting on 3" exhaust. Then i will be done for a while cause everything gets a little more costly.
Thank you all and feel free to stop by my place, if you are in Blaine this weekend (having peeps over on sat. and to view the Cat Peala w/new pinkyS10 susp.)
Aaron

Re: Need to shut up Mustang buddies
 

I say AEM, 61-67 turbo, 1000cc injectors&255walbro, 2.4L, big FMIC, good cams, sheetmetal, race gas on 30-35 psi.

You all know where I stand. It'll take that mustang down no problem even if you miss a shift. ;)

Re: Need to shut up Mustang buddies
 

lol, all in due time my friend. Just got done installing shifter bushings and i am gonna drop it off for the alignment in a few minutes. My old car had 6 out of the 9 things on your list i hope to make it 9 of 9 before i stop with this one.
Cat Peala, Out!

Re: Need to shut up Mustang buddies
 

even if you forget you are racing and start in 3rd you'll win

Re: Need to shut up Mustang buddies
 

i've seens heads and cam 5.0 run 14.4
and another run low 12's


5.0's are like a box of chocolates.......

Re: Need to shut up Mustang buddies
 

ITS SO TRUE! THANKS BRANDON

Re: Need to shut up Mustang buddies
 

Why don't you just run against him at Rock Falls? They will let you do grudge match races there. Talk is cheap and proves nothing. If you win, cool... if you lose, throw more parts at your car.

Re: Need to shut up Mustang buddies
 

also r they whistling? we need to know that right s2kracka!

Re: Need to shut up Mustang buddies
 

i would not worry about your rims and tires right away and get some new pistons rods and some bolt ons.

Re: Need to shut up Mustang buddies
 

If i can get some parts before Apr. 9th then i might run him then. I am pretty sure that i will beat the '02 GT 5 spd. He has just mainly bolt ons.

Re: Need to shut up Mustang buddies
 

start in third with a scm61? and win... LOL have fun building boost by the end of the track

Re: Need to shut up Mustang buddies
 

Alright, update, if u care or not, i don't care.

'02 GT dyno'd = 247hp 290 Tq
'99 GT = 257hp 301 Tq
'95 GT= by the end of the week

Now my new question is, i want my talon to be my daily driver can i get to around 450hp with a SAFC, obviously i am running into money problems. But i want to know can i get to 400-450hp/Tq with tuning on the SAFC and GM MAF? Cause i would rather buy the SAFC right away and start upgrading fuel too.

Thx again most of you guys are a great help.
Aaron
(Can we get more smilies?)

Re: Need to shut up Mustang buddies
 

Why the SAFC? What happened to DSMLink?

Re: Need to shut up Mustang buddies
 

With race gas or methanol injection and a decent sized turbo you can. If you want to do it on pump gas only daily, you might want to look into building a 2.4l motor, a big turbo and spending a lot of money on supporting mods.

Re: Need to shut up Mustang buddies
 

yeah, thats what i had last time and it was real fun on the street, but i am talking about right now on the 2.0L and 14b, I am waiting for a B16g. But is the SAFC sufficient for 450hp, 2.4L, big turbo, supporting mods? I just like to buy stuff one time.

Re: Need to shut up Mustang buddies
 

I would think you could get by with a SAFC and a logger on a 1g to get 450hp. The idle quality might not be as good since you would need bigger injectors, but you could have a chip burned for your eprom to make it idle like stock.

Re: Need to shut up Mustang buddies
 

Update: I just ordered DSMlink should be here by next monday. Waiting for some people to receive parts so that i can pick them up. and the '95 GT goes into Hi-Tech for tuning tomorrow. If i can get some mods by either the 9th or 15th then i should be at RF.
Thx all for input.
Aaron

Re: Need to shut up Mustang buddies
 

So do you know what your doing yet?


-Colin

Re: Need to shut up Mustang buddies
 

Oh, yea,
not sure if i saw this in the thread or not,
but i suggest you change your clutch too.

With a b16g, i'm sure an act2100 would be fine. Act2600 if you got a strong left leg.

You don't want your clutch to start slipping with all that power your making now do ya.