MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   Dave's Evo X Build/The Life of Dave blog (http://www.mitsustyle.com/forums/showthread.php?t=25695)

Murlo26 06-17-2011 02:41 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Take a guess :)

I figured it would be obvious lol.

Kracka 06-17-2011 02:42 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Knowing you and how you constantly change your mind, I'm going to guess EF4 :)

Murlo26 06-17-2011 02:46 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
A good guess indeed ;)

Kracka 06-17-2011 02:58 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
I am tempted by the EF2...

Murlo26 06-17-2011 03:00 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Quote:

Originally Posted by Kracka (Post 386398)
I am tempted by the EF2...

I am tempted by a smaller variant as well but with 2.2L's I think anything but the 4 will fall on its face.

Do it up though, join the EF club.

scheides 06-17-2011 03:21 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Nice! I have high hopes but plenty of reservations too. It would be extremely cool to see a turbo that could make a solid 500whp at DB on a nice conservative tune and can last 100k miles doing it. Time will tell, good luck!

I was going to look but maybe I'll just ask, any idea what page your numbers are on for your 30psi daily tune?

Murlo26 06-17-2011 03:39 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Quote:

Originally Posted by scheides (Post 386402)
Nice! I have high hopes but plenty of reservations too. It would be extremely cool to see a turbo that could make a solid 500whp at DB on a nice conservative tune and can last 100k miles doing it. Time will tell, good luck!

I was going to look but maybe I'll just ask, any idea what page your numbers are on for your 30psi daily tune?

I hear ya, I am in the same boat. But I am hopeful and worst case scenario I sell the turbo and try something new. I think its worth a shot for sure though, seems promising.

Here you go, dd tune.
http://i21.photobucket.com/albums/b2...scan0001-4.jpg

http://i21.photobucket.com/albums/b2...scan0002-4.jpg

http://i21.photobucket.com/albums/b2...scan0003-4.jpg

Remember I picked up like 25whp on the daily tune with the manifold swap though but this is what it made on the initial tune.

You should make an overlay Scheides, I'd be interested to see it vs. your new setup :)

turbotalon1g 06-17-2011 03:46 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Were you just on 65?

Your driver's door looked damaged.

Murlo26 06-17-2011 03:51 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Quote:

Originally Posted by turbotalon1g (Post 386405)
Were you just on 65?

Your driver's door looked damaged.

I wish haha.

I am still at work and my car still has no motor :)

Unless you meant the Honda, which is of course here at work with me...or is it? Damn it! ;)

scheides 06-17-2011 03:57 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Quote:

Originally Posted by Murlo26 (Post 386404)
Remember I picked up like 25whp on the daily tune with the manifold swap though but this is what it made on the initial tune.

You should make an overlay Scheides, I'd be interested to see it vs. your new setup :)

Yup I definitely was thinking about that manifold in the back of my mind looking for this. So with the manifold seems like the black on your car should do closer to 480 w/o pushing things, that is a nice number :) I say if the MAP EF4 makes that on this kind of a tune, very cool. Rip it! :D

I'll do an overlay this weekend sometime.

scheides 06-18-2011 01:44 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Overlays complete!

http://scheides.com/misc/pics/evox/o...-e85-32psi.jpg

http://scheides.com/misc/pics/evox/o...2psi-boost.jpg

Big difference between our setups is cams and tubular exhaust manifold I think eh? These are a LONG time apart so uber grains of salt needed, but the shapes of the curves say a lot. The BBX is obviously smaller and starting to be tapped out, the Black has a ways yet to go. Maybe my kelford cams help a little more down low, or maybe thats just turbo size showing its face. Either way, interesting to look at, I bet they are damn similar on the street!

Murlo26 06-18-2011 04:34 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Nice, interesting graphs for sure. Thanks :)

The bbx is a solid performer for sure.

Murlo26 06-20-2011 06:45 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
YAY!

The last of the parts needed...well basically.

http://i21.photobucket.com/albums/b2...6/dc9f28e4.jpg

I love new OEM parts...mmmmm.

All that's left is to sell my black and then pick up MAP's turbo for testing and some FIC 1680's so when I go E98 I have enough injector!

Parts make me happy!

In case you can't tell from the awesome pic, its a new OEM oil cooler, oil pump, gasket kit, and some mivec o-rings!

PlanoEvo 06-21-2011 09:20 AM

Re: Dave's Evo X Build/The Life of Dave blog
 
Interesting to see the benefit of extra displacement the black on murlos spools just a quick as the smaller turbo on scheides which would see much less torque if he ran the black

Murlo26 06-21-2011 09:24 AM

Re: Dave's Evo X Build/The Life of Dave blog
 
I am currently trying to sell the black, I'll be running a MAP turbo this time around more than likely, unless I can't find a good buyer for the black.

Kracka 06-21-2011 09:35 AM

Re: Dave's Evo X Build/The Life of Dave blog
 
Andrew - Those charts are from when Murlo had a 2.0L, he is currently building the 2.2L. The Black seemed to spool almost as quickly as the BBX, but look at how much sooner the BBX's torque came on vs. the Black's.

Murlo26 06-21-2011 09:44 AM

Re: Dave's Evo X Build/The Life of Dave blog
 
Quote:

Originally Posted by Kracka (Post 386666)
Andrew - Those charts are from when Murlo had a 2.0L, he is currently building the 2.2L. The Black seemed to spool almost as quickly as the BBX, but look at how much sooner the BBX's torque came on vs. the Black's.

Different cam setups for one and Scheides had real E85 which helps a bit. Both of which aren't huge differences in my mind.

Honestly, the big difference in my mind is the tubular manifold. The black wouldn't spool quite as fast with that in the comparison and would've picked up quite a bit of power/torque. I picked up like 25whp/15wtq just by bolting it on untuned.

With the tubular mani on there, for my car to reach 30ish psi the turbo would've been pushed a lot more and I think i would've made quite a bit more power. We will never know for sure now but the comparison is by no means perfect as Scheides said. I really wish I could've gotten the car tuned again by Shane before it had problems. Oh well.

Murlo26 06-23-2011 11:50 PM

Re: Dave's Evo X Build/The Life of Dave blog
 
Heard back from RC Engineering today about my injectors, they all flowed right around 1390cc's at 43.5psi...so despite all the online shit talk about DW injectors mine work fine still I guess. I still want to upgrade to the FIC 1680's though for some headroom and mainly because I was getting some p0300's. The injectors all were within 1-2% so right on.

scheides 06-24-2011 07:54 AM

Re: Dave's Evo X Build/The Life of Dave blog
 
Good to hear!

Kracka 06-24-2011 09:42 AM

Re: Dave's Evo X Build/The Life of Dave blog
 
What a shock, EXF nutswingers are wrong :)

DW's are the most commonly used injectors down here and I haven't heard of a single person having issues with them. The problem is everyone thinks they're a tuner and immediately blames everything but themselves when their cars run like shit and/or blow up.


All times are GMT -5. The time now is 06:25 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.