Re: Progress since last year
 

I miss read your sig, nice numbers for the boost and intake manifold setup. I should sell my 4202 and buy a billet 67.

~John

Re: Progress since last year
 

Re: Progress since last year
 

^lmao. only you.
Considering a 6262 has been proving to hit 700whp I think a 6765 should fit the bill pretty good.

2011 looks like it could be a fun year for the mitsu crowd.

Re: Progress since last year
 

The 6262 seems sweet....but the more graphs I have seen the more it looks like the HTA3582 owns it....do people just not like the price on the HTA stuff? Or am I missing something?

Re: Progress since last year
 

Exactly the reason I sold my GT42R.

Re: Progress since last year
 

Basically for half the price you get a turbo that is almost as good or good enough for the price break, plus I might be wrong the HTA BB stuff isn't as cheap to rebuild if needed.

I'd say for 90% of street/drag cars nothing bigger than a 6262 is needed, it'll make power to 8500-9kish on a 2L.

Plus for these 42R guys, the smaller physical size would probably be a lot easier to work with.

Re: Progress since last year
 

So it is the price...k...the low end/mid power of the HTA seem more than enough for me to want that over the 6262 if it was a street car. Pure drag car, it wouldn't matter though I suppose.

Re: Progress since last year
 

Good shit Kevin, I want a ride when this things done!

Re: Progress since last year
 

:D

Re: Progress since last year
 

For sure! I've gotta find a nitrous bottle to buy :)

Re: Progress since last year
 

You should know as well as most that the dsm community was mostly known for cheap asses!! So, Yeah price is a big deal for most!!! The 6262 is amazing so is the hta!

BB is always more to rebuild Aaron! :)

Re: Progress since last year
 

Just FYI (lower = better spool, higher=bigger top-end):
Hta3582 < 6262 < hta3586 < 6765 < hta6794 (I think that's what it's called)

All are T3 35r platform but the pte turbos end up being a few hundred bucks less. The pte billet67 is pretty win! Continually impressed with it the last year or so.

Re: Progress since last year
 

I have a bottle sitting at Primo. NOS Brand. make an offer

Re: Progress since last year
 

I haz direct port kit for sale. Do it right the first time.

Re: Progress since last year
 

Ummm I'll pm ya. Its kind of low on the priority list right now. I need to buy a converter pretty badly at this point.



Naw, its to much of a pain in the ass to change jets lol. I'm doing such a small shot anyways a single fogger will do just fine.

Re: Progress since last year
 

Just a small update on parts being gathered. Tci Outlaw shifter, Nx nitrous express wet kit, Sheet metal intake manifold, and a Q45 throttle body to start off. Plus a spy pic of the new car in the garage :)

Re: Progress since last year
 

hmmm.

Re: Progress since last year
 

I wish I had that new spy shot car :(

Re: Progress since last year
 

I'm open to offers ;-)

Re: Progress since last year
 

Time for a update later tonight I'll throw up some pictures!

2g auto trans and billet 9.5'' converter are in, kiggly stuff for 2g in a 1g stuff is here, kiggly clutch pack is here, kiggly main girdle (gonna have to spin the 2.3 to at least 9100-9300 in 3rd), Evo 8 recaro seats are here, The front end on the car is nearly tubed, and the cage should be started soon. :)

Re: Progress since last year
 

Take me to see this tubing action!!

Re: Progress since last year
 

Ill see when he needs a seat for the cage and text you. Should be this week I hope!

Re: Progress since last year
 

:drool:

Re: Progress since last year
 

4-6weeks from now this will be in my hands!! Magnus V3 intake manifold for 1g's are being released soon. I'm on the pre order list.

Re: Progress since last year
 

Hopefully you will have it 4-6 weeks. I want one pretty bad, been drooling at them on tuners for a couple days. Lucky 'sum bitch lol.

Re: Progress since last year
 

Sorry Turbotalon I went up there after work last night at like 11. Heres some of the tube work being done so far on the front end.

Haters gonna hate on my intercooler :) I dont care though its massive!! 5'' thick ftw!!!

Re: Progress since last year
 

Looks nice! Is that going to save a lot of weight?

I'll be living my auto dreams through your car this year haha

Re: Progress since last year
 

I'm not sure if it is or not. I bought the car from Kyle in a nut shell after he cut off the frame rails and all that fun stuff up front. I think it will maybe save a few lbs. But it will allow my to have more room for a bigger rad if I want and also a big big big trans cooler. The auto shall prevail!!!

Re: Progress since last year
 

GET EXCITED!! Magnus V3 paid for, and is in production now!!!

Re: Progress since last year
 

More update!! Lookin amazing!!

http://i199.photobucket.com/albums/a...z1822/car2.jpg

http://i199.photobucket.com/albums/a...zz1822/car.jpg

http://i199.photobucket.com/albums/a...z1822/car3.jpg

Re: Progress since last year
 

Are you seriously still running a stock radiator on that thing?

Re: Progress since last year
 

LOL no thats a mock up rad. I have a nice aluminum radiator.

Re: Progress since last year
 

If it works who cares.

Re: Progress since last year
 

I'll be up there tonight around 10:30 if you want to check it out. Although I'll be working on other cars up there for him.

Re: Progress since last year
 

Is that kyles old car? (QPRs old car)

Re: Progress since last year
 

That's past my bedtime I'm afraid. Plus I don't know where it is.

Yes it is.

Re: Progress since last year
 

Yessir it is. trapped 150 at 700whp :)

Re: Progress since last year
 

That looks badass! Props on the fabrication skills!

Re: Progress since last year
 

Holy shit.

You're going to dig the intake manifold. I just got mine the other day, thing's a monster.

Re: Progress since last year
 

Oh how I hate you Kevin... :D JK

Oh and...
Troof.