Re: GsXtUrBo98's 2G project thread
 

Have you homie J-funk, move the outlet on the radiator, its honestly a 10 min job.

Good luck, you gonna run some 11s at 140 this year? lol

Re: GsXtUrBo98's 2G project thread
 

damn sucks about the hose. Wasn't an issue on mine since the hose connects to the radiator in a different spot on 1G's I guess. Might want to look into getting a custom hard hose welded up. Or move the radiator outlet towards the passenger side a little and maybe see if you can run a 1G hose.

Re: GsXtUrBo98's 2G project thread
 

I'll take a look into bringing it up to primo and maybe having them move the location tomorrow I guess.. This one cought me off guard as I was not expecting the radiator hose to touch..:frown:

As for Aaron my goal is to run faster then 11.37 I believe that was the best Kevin got in his old talon! :wink:

Re: GsXtUrBo98's 2G project thread
 

^hahaha, that a boy. make it 10.37 and that would be a doable challenge.

Good luck this year, I hope you hit the 140 we were talking about.

Re: GsXtUrBo98's 2G project thread
 

Jeez at this rate my Evo might be done before your Eclipse!
And it was 11.40@131. Pretty easy to beat ;)

Re: GsXtUrBo98's 2G project thread
 

Well looks like I will be dropping off my radiator at primo to have this welded where the hose goes to in the picture... This is more then I was hoping on doing..

On a side note I called SLS about this fitment problem and they blew me off saying that they installed it on multiple cars and never had a problem. So I told him that 1Gs have the hose located in a different spot and asked if they sold a different upper radiator hose to correct this problem and he told me to "lengthen my stock upper hose" as if I can lengthen a radiator hose that's cut to stock spec! SLS service :crapper:

Re: GsXtUrBo98's 2G project thread
 

I have a never ending hassle with this car.. FML

On another side note thanks Aaron for the radiator hose! As always a good guy to bs with.

Re: GsXtUrBo98's 2G project thread
 

Well been working too much so gonna have to see if I can bring that radiator up to primo on Friday after work..

Does anyone have any other ideas besides doing the rewelding of the radiator? Already tried shortening the hose and still hits..

Re: GsXtUrBo98's 2G project thread
 

Make a hard pipe like the supra guys run with couplers on the ends.

Re: GsXtUrBo98's 2G project thread
 

I would think that would take more time and money..

Re: GsXtUrBo98's 2G project thread
 

^I could help with that, but I'd need to know what shape it has to be in.

Stop by this weekend and we can figure it out. also leave our transaction review in my thread and the link on that page too.

Re: GsXtUrBo98's 2G project thread
 

Sorry to see SLS's customer service hasn't changed.

Lemme know if there's anything I can help with. I'm back in town finally.

Re: GsXtUrBo98's 2G project thread
 

Thanks guys. Aaron I will try and swing out on Friday night?

Re: GsXtUrBo98's 2G project thread
 

I guess I don't see what the problem with the radiator is? Isn't that the normal location for a 2g radiator hose? Or does the 2g hose hit your exhaust manifold?

Re: GsXtUrBo98's 2G project thread
 

Yes to both questions

Re: GsXtUrBo98's 2G project thread
 

tomorrow night is good I'm pulling an all nighter I think.

Re: GsXtUrBo98's 2G project thread
 

sweet! I'll text ya!

Re: GsXtUrBo98's 2G project thread
 

SS piping is cheap and i know someone with a new welder that can weld it to the right shape. will look real nice too instead of a rubber hose.

Re: GsXtUrBo98's 2G project thread
 

^may have to do this but that person lives so far away..

Re: GsXtUrBo98's 2G project thread
 

My car officially has POWER! electric power that is... But the battery relocation wiring is complete besides making it look nicer.