![]() |
Re: Mark's Evo IX MR Winter Projects
You should race swifty some time, 656 is a lot on that dyno.
|
Re: Mark's Evo IX MR Winter Projects
Quote:
|
Re: Mark's Evo IX MR Winter Projects
^It sure wouldn't be at a track!! :rollinglaugh:
|
Re: Mark's Evo IX MR Winter Projects
Quote:
|
Re: Mark's Evo IX MR Winter Projects
Is swifty still around?
|
Re: Mark's Evo IX MR Winter Projects
He was creeping on here last night i saw when i was in a thread.
So is this car going to be tearing up RS/U at PG and the race car in whatever the big dog class is? |
Re: Mark's Evo IX MR Winter Projects
Quote:
With no confidant ETA in sight. IT SUCKS! In the event that the race car is not ready I’ll be bringing the 6266 powered Evo. I’m not sure what I events I will enter? Also, I heard that Swifty might have sold his car! So much for the race. |
Re: Mark's Evo IX MR Winter Projects
Nice, sounds like either way you will equipped to kick some ass.
|
Re: Mark's Evo IX MR Winter Projects
I feel ya on the ETA thing Ill probaably miss proving grounds because of it. At least you have to beasts to play with though Im sure the Evo wil DO WORK! Alot of big turbo evos should be there this year.
|
Re: Mark's Evo IX MR Winter Projects
Wow it's been a while since I posted on this thread. The trailer and car are tucked away for the winter. I took the battery and injectors out. I'll be sending the 2150's back to FIC for a clean and balance. It was an uneventful summer! I thought I popped the head gasket, but turned out to be a faulty radiator cap. That’s it!
http://i412.photobucket.com/albums/p...110_142324.jpg |
Re: Mark's Evo IX MR Winter Projects
Gotta love the simple fixes.
|
Re: Mark's Evo IX MR Winter Projects
Well I took my evo to bir for the 4th of july. First pass down the track and I poped the clip out on the clutch... no good, I was running an exedy hd twin disc. I never expected to run this clutch with the power I make but is been holding well to this point. I just got the car back on the road, changed the clutch out for a qm gear drive. l also ripped apart the transmission to install a billet output tube.
http://i412.photobucket.com/albums/p...625_194948.jpg http://i412.photobucket.com/albums/p...723_081719.jpg |
Re: Mark's Evo IX MR Winter Projects
I forgot to review how the car drives with the new clutch. I had a dsm qm for many years, and it made so much noise it wasn't even funny. The new gear drive is barely noticeable and is slightly louder than the exedy. driveability is very similar too. I'm super happy.
Oh and I needed to machine some of the throw out bearing to get it back in spec. It was like 0 clearance, it should be around 0.144 of clearance. Others have commented about this too, and some have toasted thrust bearings due to not measuring! |
Re: Mark's Evo IX MR Winter Projects
Thats shitty about the TOB, good catch though sir. What did she run at BIR?
|
Re: Mark's Evo IX MR Winter Projects
I love this car.
|
Re: Mark's Evo IX MR Winter Projects
Those Hoosiers... Which car you bringing to PG2?
|
Re: Mark's Evo IX MR Winter Projects
Something must be wrong with mine. It's so loud it's embarrassing
|
Re: Mark's Evo IX MR Winter Projects
Wahoo! Rip it son!
|
Re: Mark's Evo IX MR Winter Projects
Up at pg on Friday I made a pass to check trap speed, not launching the car, went 10.6 @ 142. I'll only get 1 more chance at a full out pass, as I was warned by track officials. Got the 2 step all dialed in and I'm going to try to launch it. If the 60 feels good I'll run it out. It would be crazy if it went 9's!
|
Re: Mark's Evo IX MR Winter Projects
I love this car.
|
Re: Mark's Evo IX MR Winter Projects
Quote:
Thanks! Had a great weekend, the weather was awesome, great times hanging out with everyone. I met all my goals of the weekend, get deep into the 10’s, go 140+, and win the class. I ended up running a best of 10.325@ 140 in the finals to win the RSU class. I’m super impressed with the car, I never had do anything with the car all weekend. In comparison, when I run my talon it pushes about a ¼ to ½ a quart of oil in the catch can each pass. The Evo had nothing to drain. As it turns out the Evo is not as well behaved off the line like my Talon is. I failed to get traction off the line when on the 2 step limiter. It would just immediately spin the front tires. I could have tried lots of different RPM points, but I ended up just free revving pretending I was leaving a stop light quickly. I think with a ton of seat time I could get into the 9's, but it's not my goal. I'm 100% fulfilled with the low 10’s! I could not get the embedded video to work, below is the link: https://www.youtube.com/watch?v=FtKM3c2jfWg |
Re: Mark's Evo IX MR Winter Projects
|
Re: Mark's Evo IX MR Winter Projects
It was fun seeing this thing Run out there Mark. A beautiful car and a beautiful set up! I wish we could have done a run together
|
Re: Mark's Evo IX MR Winter Projects
RSU WINNER! Nice dude!!!! Bad ass!!! This car is so neat&clean it is amazing. Such a rocket, 140mph! Epic!
|
Re: Mark's Evo IX MR Winter Projects
Does this have a cage? I don't remember seeing one.
It looked like a normal evo with rims and hoosiers, not loud or anything really noticable. After your comments, you think you would do a drag evo over your talon? |
Re: Mark's Evo IX MR Winter Projects
Quote:
|
Re: Mark's Evo IX MR Winter Projects
lol, love it.
Funny your non-drag car was faster than 95% of the cars out there even the drag cars and turbo V8 cars! |
Re: Mark's Evo IX MR Winter Projects
Quote:
Congrats Mark, goals that are met at the track is the best feeling.:dj: |
Re: Mark's Evo IX MR Winter Projects
Mark have you taken the "Helper" spring out? I just did and it made the clutch feel a little better on the street. Apparently you dont need them with a hydraulic bearing, diagram 4:
http://tiltonracing.com/wp-content/u...VO-Package.pdf |
Re: Mark's Evo IX MR Winter Projects
Quote:
|
Re: Mark's Evo IX MR Winter Projects
Sunday?
Oct 4th is the midway shootout. You going with the TaloN? |
Re: Mark's Evo IX MR Winter Projects
Quote:
My win RSU slip attached below: http://i412.photobucket.com/albums/p...921_090141.jpg |
Re: Mark's Evo IX MR Winter Projects
Quote:
|
Re: Mark's Evo IX MR Winter Projects
The car has been still rocking along. It's been a reliable car, for the exception that I stripped teeth off of second gear about a year ago and I had to open up the aem ems to replace a low side driver for mivec control. Other than that not too bad for a 770whp car! The exaust is annoying loud, it's got 3.5" aluminum exhaust with vibrant mufflers. My little project was to quiet down the beast!
I decided to try to make a larger muffler, since there were no alternatives in aluminum. http://i412.photobucket.com/albums/p...403_071410.jpg With the stainless steel and fiberglass packing. http://i412.photobucket.com/albums/p...405_160418.jpg Welded and polished: http://i412.photobucket.com/albums/p...409_144841.jpg In comparison: http://i412.photobucket.com/albums/p...409_151916.jpg I just finished it up and it did exactly what I wanted, it's got a deep tone with no more weird resonance, and it's very quiet. Should be a good summer! |
Re: Mark's Evo IX MR Winter Projects
Quality work as always. Do you have a before and after video?
|
Re: Mark's Evo IX MR Winter Projects
how do you like it for a DD? is it truly a DD?
|
Re: Mark's Evo IX MR Winter Projects
Quote:
|
Re: Mark's Evo IX MR Winter Projects
So clean, perfection. I see you are in Eagan, as am I, hopefully see you around!
|
Re: Mark's Evo IX MR Winter Projects
It was time to switch up and improve my suspension. I was following schides recipe from his Evo. I bought a set of new bilsteins with some Swift spec-r's, I restacked the rear differential, installed a whiteline rear sway bar with whiteline bar links and larger brackets. The car looks way better lowered a little bit. What sparked all this was that my silver evo has a blown strut. It's going to get the bilsteins from my MR. I also bought a tatricx 2.0 cable to replace my 1.3 that died on me, I'm playing with ACD tunes now.
http://i412.photobucket.com/albums/p...812_081540.jpg I also had really crappy looking brembo's, so I decided to repaint them. Evo M had a great write-up on refinishing. I never realized they sold 2K clear coat in a rattle can. The results were really good. I bought one of those paint code custom aerosol cans. After I manually chipped off the failing clear coat: http://i412.photobucket.com/albums/p...723_121140.jpg Afterhttp://i412.photobucket.com/albums/p...727_073033.jpg With the high temp vinyl decals. http://i412.photobucket.com/albums/p...731_075022.jpg |
Re: Mark's Evo IX MR Winter Projects
Damn they look good
|
All times are GMT -5. The time now is 01:35 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.