Re: GsXtUrBo98's 2G project thread
 

CORNFED2.4 I was actually going to look at your pictures to see where you put your over flow tank.

Re: GsXtUrBo98's 2G project thread
 

ok sounds like the 2 issues I ran into our solved. Also I have sheides old overflow from his rolled evo. Its a little smaller but still isnt secured by any means.

Re: GsXtUrBo98's 2G project thread
 

Can't you just take out the nuts holding the manifold on, back the manifold off an inch to slip a nut on the threads then put it back on? I think that's what some X guys have to do with their tubular mani's.

Re: GsXtUrBo98's 2G project thread
 

The problem isn't getting the nut on its that the stud is so long that it will hit the manifold when I tighten the nuts down...

Re: GsXtUrBo98's 2G project thread
 

Nice progress, sucky about the mani.

Re: GsXtUrBo98's 2G project thread
 

Thanks and tell me about it..

Re: GsXtUrBo98's 2G project thread
 

Did you cut that damn stud yet?

Setup is looking awesome Chris!!

Re: GsXtUrBo98's 2G project thread
 

Can I just cut it? I would think that if I cut it that the nut wouldnt go on?

Re: GsXtUrBo98's 2G project thread
 

Make sure you put the nut on the stud first before you cut it. That way when you back the nut off the stud it will help fix the threads if they aren't perfect. I've always smoothed the edges of the stud a little bit before backing off the nut.

Re: GsXtUrBo98's 2G project thread
 

I think you were right. Are set ups are identical for bolt on's. The only thing is I have the 2.4. Proving grounds will be fun this year, Im just suprised I guess there were only a few 2g's around. When you getting tuned?

Re: GsXtUrBo98's 2G project thread
 

Thanks I will prob do that tonight or tomorrow and see how it works!

I am hoping to have the car tuned somtime in April but ya never know because nothing turns out like its planned... What about you?

Re: GsXtUrBo98's 2G project thread
 

Im not gonna retune till we get the good e85 back.

Re: GsXtUrBo98's 2G project thread
 

^ Well i just bought a bike so I guess that I'll get it tuned when I get the money..

Re: GsXtUrBo98's 2G project thread
 

Send me a pm when you go!

Re: GsXtUrBo98's 2G project thread
 

Ok for sure

Re: GsXtUrBo98's 2G project thread
 

U got a bike? Planning for the car season Pretty early aren't you?

Re: GsXtUrBo98's 2G project thread
 

Ran into a problem with my radiator hose hitting the manifold!! Not sure what I'm going to do at this point.... Any ideas would be great!

Re: GsXtUrBo98's 2G project thread
 

Working on the battery relocation. I HATE WIRES!

Re: GsXtUrBo98's 2G project thread
 

Some shots as the car sits as of tonight when I got frustrated and left it due to the radiator hose..

Re: GsXtUrBo98's 2G project thread
 

So you all are aware I am getting that dump tube ceramic coated as well and am just using is for mock up at this moment.