|
Re: Big Brown's Automagic - The last episode in my DSM story.
Gauges look great. Can't wait to see this thing in action. That e85 looks gross too, rusty gas tanks ftl
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Hellz yes!! Those gauges were fun
|
Re: Big Brown's Automagic - The last episode in my DSM story.
That gas is fine, that tank is mint inside and out. The cooler was dirty and the E85 seperated.
I don't usually look at those center gauges all the time on the street, maybe glance at the trans temp for mental logs, the EGT isn't hooked up yet, and the boost well I don't care about boost its not high enough for me that's all I know! lol. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Looks good!! I was planning on doing my cluster like that too!! When do I get my ride in yours???
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Way cool pics. Glad you shared them.
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Is this thing running yet?? JEEZE!!
|
Re: Big Brown's Automagic - The last episode in my DSM story.
It is together and running, but not without issues.
I have a weird noise in the drivetrain (rear end, driveshaft) dependant on speed. I need to figure it out, also my alignment is way the fuck off now, I put in solid poly bushings in the rear mustache bar and filled the driveshaft carrier bearings and installed solid/metal carrier bushings. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Quote:
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Nope, figured it out my DS angle was off pretty bad. I'm gonna find more info about the specs and get it perfect but its nice and quiet for now. I feel like a dumbass for not messing with it before but oh well.
|
Re: Big Brown's Automagic - The last episode in my DSM story.
So here is way overdue update, its only been about 2-3 weeks but it feels like 2-3 months.
After a local dyno day I took a friend for a ride and then I decided to launch it. Well apparently 27psi on the 3-bolt wasn't a good idea, to be honest it was like my 10th-11th time doing it so I learned my lesson. Actually I know better I just like doing it. Results: http://a8.sphotos.ak.fbcdn.net/hphot..._5983824_n.jpg I saw that and I was hoping that the axle was just pushed out. So i drained the fluid to see if there were any chunks, that would tell me. http://a1.sphotos.ak.fbcdn.net/hphot..._1457538_n.jpg Fluid results are in: http://a3.sphotos.ak.fbcdn.net/hphot..._3489616_n.jpg Yep there were chunks and I've never seen fluid that dirty before If you look at the axle that isn't in the rear end, you will see that the axle is snapped, so 1/3 of it is stuck in the rear end. http://a7.sphotos.ak.fbcdn.net/hphot..._1721127_n.jpg More results of no self-control. http://a4.sphotos.ak.fbcdn.net/hphot...1_708585_n.jpg Removing the rear end, its so dirty: http://a5.sphotos.ak.fbcdn.net/hphot..._6661125_n.jpg Inside of the now not so good rear end. http://a6.sphotos.ak.fbcdn.net/hphot..._6482730_n.jpg Thanks to Mo on this one, luckily he was around doing some work for "teh bean" and told me how to fill the carrier bearings, this was my first time in 7 DSMs doing this and thankfully he was there to guide me. Not exactly hard, but I didn't know what I was doing. http://a3.sphotos.ak.fbcdn.net/hphot..._3831748_n.jpg Metal sleeves that I removed from the rear mustache bar, I had to use fire. http://a2.sphotos.ak.fbcdn.net/hphot..._2653223_n.jpg Hard to see, but there is new carrier bushings in there, all aluminum no more crappy rubber stuff. http://a8.sphotos.ak.fbcdn.net/hphot..._3143389_n.jpg |
Re: Big Brown's Automagic - The last episode in my DSM story.
About a week or so later.....
You will need some explaining on why a simple rear end swap turned into this mess. There was a rusty bolt in one of the cups in the new rear end I had. ($35 for the new rear end with axles) I didn't put any effort into getting it out and then I discovered the bolt sizes were different for the cups, so I said F it, I'll pull everything out and do it the right way. I think I just wanted an excuse to do this and with no-one to tell me other wise I pulled the whole rear subframe. http://a7.sphotos.ak.fbcdn.net/hphot..._5202404_n.jpg Dusty but not rusty: http://a6.sphotos.ak.fbcdn.net/hphot..._3391843_n.jpg ABS lines removed! Plastic cup fit in there nice and snug. http://a1.sphotos.ak.fbcdn.net/hphot..._8382207_n.jpg Goodbye evil ABS sensor. http://a8.sphotos.ak.fbcdn.net/hphot..._6711880_n.jpg So instead of welding in new active toe eliminators and trying to push these bushings out, I came to reality knowing that I wasn't comfortable with my welding skills at the moment and I wanted to make proving grounds 2011. At this point the car has been apart for about 2.5 weeks Filled mounts. http://a1.sphotos.ak.fbcdn.net/hphot..._2510559_n.jpg RR Side: http://a5.sphotos.ak.fbcdn.net/hphot..._4485325_n.jpg LR Side: http://a1.sphotos.ak.fbcdn.net/hphot..._3150454_n.jpg There was supposed to be a before and after, not sure where the after photo is, but its a lot cleaner now. I just wiped it down. http://a5.sphotos.ak.fbcdn.net/hphot..._3312908_n.jpg Almost back together again! Its about 10th june. http://a2.sphotos.ak.fbcdn.net/hphot..._1266306_n.jpg This is proof that the stock stuff is worn out, I'm sure that was me that did most of that. http://a3.sphotos.ak.fbcdn.net/hphot..._7645698_n.jpg What?!! These things come with a jack? bye bye extra weight. http://a6.sphotos.ak.fbcdn.net/hphot..._3938327_n.jpg Voltage gauge install. http://a3.sphotos.ak.fbcdn.net/hphot..._6578895_n.jpg Here is the pic of my fuel pump install, I can't remember the last time i did one of these, maybe 2007? I'm quite proud of this, because if i didn't tell you. You would have a hard time telling its an aftermarket. Apart from being fat. lol. http://a5.sphotos.ak.fbcdn.net/hphot..._5872874_n.jpg All buttoned up, and now I know the voltage at the fuel pump. http://a3.sphotos.ak.fbcdn.net/hphot..._5267738_n.jpg 6-20-11 Preparing for FMIC install. http://a8.sphotos.ak.fbcdn.net/hphot..._4485572_n.jpg Yes that is a sidemount intercooler, yes it has seen 27psi lots of times and whooped a mustang gt (probably stock minus pipes) http://a4.sphotos.ak.fbcdn.net/hphot..._6363575_n.jpg SO this might be one of the many cause my car liked to run hot, dirty *CENSORED* coolant. http://a5.sphotos.ak.fbcdn.net/hphot..._4633718_n.jpg Time to do some cutting!! http://a1.sphotos.ak.fbcdn.net/hphot..._6316951_n.jpg The broseph doing what he does best, welding some mounts on my FMIC. http://a7.sphotos.ak.fbcdn.net/hphot...7_656622_n.jpg My sweet E316G, look close though. http://a5.sphotos.ak.fbcdn.net/hphot..._8262431_n.jpg I told you to look close, the comp. wheel is chipped I bought it like this. http://a3.sphotos.ak.fbcdn.net/hphot..._7492738_n.jpg Fabbing pipes, this was a somewhat fun night kinda like old times working late during the week to get the car done for an event. http://a6.sphotos.ak.fbcdn.net/hphot..._1785268_n.jpg 6-24-2011 Progress, probably about 11pm. http://a4.sphotos.ak.fbcdn.net/hphot..._7593886_n.jpg More welding after measuring and stuff. Please note "stuff" may not be safe for children and small animals. lol http://a8.sphotos.ak.fbcdn.net/hphot..._2432434_n.jpg I was an idiot and picked up ugly aluminum angle iron, I got an earful about this. http://a6.sphotos.ak.fbcdn.net/hphot..._4907813_n.jpg He is welding aluminum, with a welder he hasn't touched in 2-3 years, upside down and while laying down. http://a8.sphotos.ak.fbcdn.net/hphot...82_26101_n.jpg http://a7.sphotos.ak.fbcdn.net/hphot..._1920269_n.jpg http://a1.sphotos.ak.fbcdn.net/hphot..._4159414_n.jpg I wasn't ready for this, but the stock untouched bumper fits great with the ETS 4" thick FMIC. http://a5.sphotos.ak.fbcdn.net/hphot..._1509710_n.jpg Oh, I forgot to mention my bro fit my 4" thick FMIC under a stock untouched bumper cover with room to spare. Lowest clearance part is about an inch. He just made putting AC back into this thing a lot easier. I didn't want anyone make stuff for this car that I believed that I can do/will be able to do. But I can honestly say if I get close to the level he is at right now I will be happy. A big thanks, it was fun as usual. http://a8.sphotos.ak.fbcdn.net/hphot..._7450860_n.jpg |
Re: Big Brown's Automagic - The last episode in my DSM story.
Ok, so we are at today.
7-7-2011. I didn't make it to MAP's Proving Grounds 6/26. A friend was supposed to bring me a 12" electric fan and did not. I was a little upset, but not really. When I got this car I told my wife and myself that I would not rush anything with this car to make any kind of event or for any reason really. The week of proving grounds I did exactly that and to be honest, IT SUCKED. I was dead tired and stressed. Thankfully that weekend I had a lot of fun, I missed my wife, but I have great friend that showed me a good time and I hope it will be a tradition for us. Back to the car, well until now I really haven't had time or money to mess with the car. Now I have time but I have no $$$$, i mean no $$$. TO do this the right way, I need cooling fans, head studs (Motor is 100% stock longblock), probably need a radiator. I am planning on keeping my A/C, so I can't cheap out plus I never planned on cheaping on anything with this car. I will grab some updated pics, and over the next few weeks clean up my part of the FMIC install that I'm not happy with and get everything else in the car ready for when I do have $$$ to buy parts. Quick list of things to get, in order. -Headstuds (A1/H11) -Intake pipe (It'll work, but I should be able to make one on the cheap. I've started using the welder!) -Cooling fan (I have a 10" for the AC/Driver side, but I will need to buy a nice one for the main fan) -Radiator. (Probably will be 3 core mishimoto full size, i wanted to do a half, but I'll need all the cooling capacity I can get) I think that's it to get the car running and driving again, I'll have to upgrade to the full version of DSMlink V3 because I'm on a TiAL BOV that doesn't recirc it was free and the 1G wouldn't cut it. I'll try and get pics of how the car sits soon. As of today the goal is to make some passes in early/mid september and have a handful of passes before the end of the season. |
Re: Big Brown's Automagic - The last episode in my DSM story.
SO a small update here, I did something bad and put a turbo on my CC, even though i'm trying to pay it off.
Should have pics by end of the week. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Car is looking real good. Wait turbo did you buy? I might have a fan laying around. if its whay you are looking for you can have it. What are you hoping to run at the track? Keep up the good work.
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Epic Update! Nice stuff man :)
|
Re: Big Brown's Automagic - The last episode in my DSM story.
IF i'm still on this 16G then low 12s maybe break this big girl into the 11s, if not I'm not sure.
PM me with what fan you have, I'm going to order a nice 12" fan but I'll need one for the driver/AC side. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Amazing update! The underside of that car is very clean for it's age... gah seeing this makes we want to fix my car.
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Awesome posts man! Sorry you didn't make it to Proving Grounds with it but like you said, don't rush it! We had fun anyways :D
Car looks awesome! Tsk tsk for putting parts on a CC but hurray for progress! Can't wait to get a ride in this thing someday :) |
Re: Big Brown's Automagic - The last episode in my DSM story.
Sorry for giving you free aluminum angle that you hate.
|
Re: Big Brown's Automagic - The last episode in my DSM story.
^lol. I could never hate something that you gave me. :hugs:
I'm just made at myself for being an idiot and not checking the box to make sure it was empty. Those angle piece have the FMIC mounted and that it was counts for now. Thanks for the comments guys it makes me carry on this thread. Sadly I'm not seeing the next time this thing will run with $$$ being tight as far as I can see into the future. :jerikoporn: |
Re: Big Brown's Automagic - The last episode in my DSM story.
Quote:
Aaron, I hate that -10 braided stainless line you gave me too, now my pump cavitates on a hard corner if the tank is near empty! :sasmokin: |
Re: Big Brown's Automagic - The last episode in my DSM story.
I gotta stop giving people stuff for free who don't appreciate it I guess...
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Brandon, I'll take free stuff and not hate it :)
Looking good Aaron. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Soooo..........
She is alive again, now with more FMIC, head studs, Trans cooler and 16G. Need to adjust the tune and sort out some rattles. Thanks to Munchgsx, blackawdtsi, and my friend Kris and of course MAP for some sweet parts and stocking everything we pulled a late night and had her up and running, I had a blast driving it today, esp in the last 5 mins since I did a boost leak test, I think this is the most sealed I've ever had a car. Pics to come. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Congrats man! The blaine peeps cars are all coming together :)
|
Re: Big Brown's Automagic - The last episode in my DSM story.
I saw you today on hodgson in it! Looking good!
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Congrats dude! Post some pics and have fun with it!
|
Re: Big Brown's Automagic - The last episode in my DSM story.
better drive it to work tomarrow I want a ride. Glad it together wish mine was road worthy.
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Quote:
|
Re: Big Brown's Automagic - The last episode in my DSM story.
So, yesterday after fixing boost leaks she would miss bad at about 5k-5500rpms, figured either plugs or MAF since I was at that 2400hz window but since i couldn't remember how old the plugs were or what was in there I went and got some BPR7's.
New plugs gapped to .028 cleaned her right up, pulls 27psi spike settles to 22psi by redline. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Nice story I've always loved 1G's and my first was a fwd Turbo and sometimes I still think about that car my first DSM. Thanks for keeping one of these truly unique cars alive!
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Thanks for my recognition butthead!! ;)
|
Re: Big Brown's Automagic - The last episode in my DSM story.
^i was gonna post pics with your recognition slutface!
Kevin saved my car by giving me his o-ring from his bov on his car. That was the biggest boost leak on my car it wouldn't even hold 1-2 psi. He also offered to touch my penis which made me smile. |
Re: Big Brown's Automagic - The last episode in my DSM story.
That's hot.
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Wire the gate yet?
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Or the free welding?! ;)
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Quote:
|
Re: Big Brown's Automagic - The last episode in my DSM story.
Quote:
Quote:
Quote:
Lolz. We are mere peons who don't get appreciated. S'all good. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Sorry guys, i was on my phone and you know me well enough to know how my brain works. Also i remembered you bman and mo, but i was driving and not stopped, this is the second time i've been online and you guys are always there for me.
I guess this is what happens when you try to thank everyone. :rollseyes: https://fbcdn-sphotos-a.akamaihd.net...7_803042_n.jpg OK, made decent power car is totally fun. I have to thank each and every one of the following people, if i forget i am very sorry please try not to get upset. (No order, its hard for my brain to work) My brother Chris for the amazing fab work and giving me shit. Brandon/B-man/Halon - wrenching and for the freaking best free parts you could get, also to include some bomb ass smoothies. Mo/Speedfreak - Life saving welding jobs much appreciated, i owe you. Nick/Munchgsx - Parts/wrenching/making fun of me and laughing at me, oh and calling me a pussy a lot of times. Jesse - friend of mine for coming over to help wrench whenever. Jim/TalonFiero - Thanks for the help/pumps Phil/Quigs - Wrenching/tow/road tripping Noyes aka body work guy - For the tow/help/advice Woo/Blackawdtsi - Driving/wrenching Steve/goatblower Mike/mike 55112 Kris D. Kevin/Santa - His boost leak saving 0-ring, (I forgot to order a new one today) Jrohner - Auto trans TCU work Chim 55xxx John L. MAP Bob s./Duder Carltalon TKR And My wife who was laying here when I originally posted, saving me from shooting springs out of the valve body and pullin the trans apart and hundreds of other times I've had to have some help. No matter what you did even if i forgot to mention you, i appreciate what you have done whether making fun of me, helping wrench, bouncing ideas off each other, offering advice or parts. All of you, some I'm sure i have forgotten in this 10-15 mins of trying to think of everyone has helped me along the way in the last 10+yrs and now my 7th DSM, I honestly say thank you. |
Re: Big Brown's Automagic - The last episode in my DSM story.
Nice! How does it launch or do you need a different TC and some TCU magic to launch the auto?
|
| All times are GMT -5. The time now is 04:03 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.