Re: My 95 talon
 

Yeah they were fouling out immediately! Going home now to check link to see if it got clicked on.

Re: My 95 talon
 

yeah I clicked in on. So its off now and got a new one. p0201 (circuit malf. cyl 1).

Re: My 95 talon
 

Wtf with all these bad news codes? Sorry to hear this

Re: My 95 talon
 

I'm gonna pull ecu and harness and see what's going on.

Re: My 95 talon
 

Little update.

I ended up breaking my crank by the # 4 rod bearings.

List of things that will be done to get it back up and running.

Oem 2.4 crank from Leasure
oem timing belt
power solution ml headgasket
L19s
acl race bearings
clean and inspect everything

I'll update with pics as soon as it's out

Re: My 95 talon
 

Lets get it done, sounds like a solid plan. L19s and HG will allow you to run some real boost without worry.

Nice of Mark to sell you a crank, I know he has thoughts of hoarding them. :D

Re: My 95 talon
 

Yeah I still gotta grab it from him my schedule is keeping me out of Eagan, so I'll prolly grab it early next week.

Re: My 95 talon
 

Permatorque hg with19s

Re: My 95 talon
 

If they make one for the 2.4. When I called MAP, this is what they suggested and ran in there 2.4. They said the power solutions was just as good if not better. :nod:

Re: My 95 talon
 

Crack! its hard to see but there

http://i824.photobucket.com/albums/z...4/76d2f15e.jpg

http://i824.photobucket.com/albums/z...4/db78a948.jpg

Its prolly been awhile. LOL

http://i824.photobucket.com/albums/z...4/900b0248.jpg

Now to put the front suspention back together and roller her on out the garage.

Re: My 95 talon
 

I do need to hoard them. Not easy to find these days. I wish I had 2-3 extras on hand. Happy to get someone else up and runnign tho.

Re: My 95 talon
 

Picked a 2.4 crank from Leasure. Dropping it off at crankshaft supply tomorrow. Then ordering some acl race bearings so I can move toward with this bish!

Thanks again Mark.

Re: My 95 talon
 

Haha finally, Get that thing up and running before summers done!

Re: My 95 talon
 

Yeah, I'm lazy! So the crank will be done tuesday. Pretty impressed to guy said what would you like us to do to this 2.4 crank. I know that's all the do, but I thought it was cool and glad it's in there hands.

Crossing fingers to be up and running by the 15th

Re: My 95 talon
 

It's been a while so time for some updates!

After having the crank at crankshaft supply for almost 2 months and still no success on getting the broken bolt out! I picked it up and went to MAP to see wht they could do? No luck there they sent me to somewhere off of university and 37th. (i forget the name)

So now he bolt is out and crank is ready to go!

Things I picked up some things from MAP today

87mm permatorque
87mm wiseco rings
ACL main/rod bearings
H11 HD headstuds

Things I already have

38 mm tial
2150 HI FIC

Things I have to get still

6262sp BB
STM FF mani
V3
fuel lines from tank/rail/tank
seats

Hoping to make 600 @ DB this spring!

Also what do I need to upgrade from v2.5 to v3?

Re: My 95 talon
 

Woo! Good luck man, get it back together! Can't wait to see this thing rollin again :D

Re: My 95 talon
 

Just go to dsmlink.com and follow the directions there.

I'm not sure exactly how it works on a 2g though. I'm pumped to see this, you might make Jim cry, if he is still in the country anyway.

Re: My 95 talon
 

Why would Jim cry. Lol

I contact them through email and see what they say

Re: My 95 talon
 

OMG. FF manifold FTW. Moar pics plz

Re: My 95 talon
 

pics man!!