MitsuStyle
Page 6 of 11 12345 6 7891011
Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   1992 Eagle Talon TSI Project (http://www.mitsustyle.com/forums/showthread.php?t=25528)

tpunx99GSX 03-19-2010 04:47 PM
Re: 1992 Eagle Talon TSI Project
 
Quote:
Originally Posted by Swifty1638 (Post 329858)
Ya, you'll see your wrist will hurt, it's not natural at all. twist your wrist, and hold it, and try to powershift. Get a ball, weighted like mine, or even the stock evo ones..call it a day.
When you sit in a sofa chair and have your arm on the arm wrest, do you usually cup your hand like your holding your shift ball or do you put the palm of your hand downward. I put my palm downward, seems much more natural to me. we will see.. its only a shift knob, and can be switched out with very little effort.

goodhart 03-20-2010 03:12 PM
Re: 1992 Eagle Talon TSI Project
 
I always have my palm faced downward when I shift....

Anyways, Tom since you're too lazy to figure out your monster displacement with your killer .040 overbore, your engine is 1999.3cc vs. 1997.4cc stock. lol

Stock= 1997.4
.020 over= 1998.4
.040 over = 1999.3
.060 over = 2000.3

http://www.bgsoflex.com/displacement.html

Kracka 03-20-2010 03:15 PM
Re: 1992 Eagle Talon TSI Project
 
DAMN! Your torque is going to be insane now.

turbotalon1g 03-20-2010 03:17 PM
Re: 1992 Eagle Talon TSI Project
 
http://n3t.net/humor/motivation/torque.jpg

tpunx99GSX 03-21-2010 07:01 PM
Re: 1992 Eagle Talon TSI Project
 
2 Attachment(s)
Hmmmm... . choices. Ghetto Fab Vs. Thermal....

tpunx99GSX 03-21-2010 07:06 PM
Re: 1992 Eagle Talon TSI Project
 
Quote:
Originally Posted by goodhart (Post 329967)
I always have my palm faced downward when I shift....

Anyways, Tom since you're too lazy to figure out your monster displacement with your killer .040 overbore, your engine is 1999.3cc vs. 1997.4cc stock. lol

Stock= 1997.4
.020 over= 1998.4
.040 over = 1999.3
.060 over = 2000.3

http://www.bgsoflex.com/displacement.html
Im 90% sure you are wrong there.
I looked it up here and this is what i found.
I have 86mm pistons therefore i belive my displacement would be 2045cc
http://www.dsmtuners.com/forums/stro...re-stroke.html

turbotalon1g 03-21-2010 07:40 PM
Re: 1992 Eagle Talon TSI Project
 
Thermal dumbass.

TkrPerformance 03-21-2010 07:51 PM
Re: 1992 Eagle Talon TSI Project
 
Use the good non getto one on the car and sell me the getto on cheap as long as it is 3in so I can chop it up and put it in the new mirage

turbotalon1g 03-21-2010 08:08 PM
Re: 1992 Eagle Talon TSI Project
 
^Perfect. THere you go tom help yourself and help a local.

tpunx99GSX 03-22-2010 12:40 AM
Re: 1992 Eagle Talon TSI Project
 
Quote:
Originally Posted by TkrPerformance (Post 330152)
Use the good non getto one on the car and sell me the getto on cheap as long as it is 3in so I can chop it up and put it in the new mirage
I think its like 2 3/4. If you want it its yours for 10 bucks. LOL.

tpunx99GSX 04-12-2010 09:13 PM
Re: 1992 Eagle Talon TSI Project
 
Pistons are on their way. Should be here in the next couple days. and then the fun begins.

scheides 04-13-2010 08:43 AM
Re: 1992 Eagle Talon TSI Project
 
Quote:
Originally Posted by tpunx99GSX 3 weeks ago
... it was supposed to be here last wednesday, then today, and i dunno maybe tomorrow. Their distributor keeps telling them tomorrow.
So while i have been bored and waiting for the piston...


Quote:
Originally Posted by tpunx99GSX (Post 334285)
Pistons are on their way. Should be here in the next couple days. and then the fun begins.
I hate the waiting game, boo.

Matt D. 04-13-2010 09:19 AM
Re: 1992 Eagle Talon TSI Project
 
I had two DSMs once. Neither ever ran. Good luck.

goodhart 04-13-2010 10:09 AM
Re: 1992 Eagle Talon TSI Project
 
Here's to hoping you don't get a Chevy 350 piston on your doorstep in a few days!!

A//// Guy 04-13-2010 10:34 AM
Re: 1992 Eagle Talon TSI Project
 
Quote:
Originally Posted by Matt D. (Post 334369)
I had two DSMs once. Neither ever ran. Good luck.
Hahahaha too funny.

tpunx99GSX 04-13-2010 10:41 AM
Re: 1992 Eagle Talon TSI Project
 
Scheides, i got tired of waiting and posted up a WTB on the dsmlink forums. Two people replied, one of them with an insane deal. Got a refund from map (No bad juju with MAP, totally not their fault at all.) 4 slightly used mahle pistons for $165 shipped. Cant beat that.

tpunx99GSX 04-16-2010 02:19 PM
Re: 1992 Eagle Talon TSI Project
 
PISTONS HAVE ARRIVED!!!!!!!!11!!!
And they are the correct ones. Finally. All of them look in good shape, just a little cleanup on the top sides and we are good to go. !

Matt D. 04-16-2010 02:59 PM
Re: 1992 Eagle Talon TSI Project
 
Don't put them in upside down or backwards.

DSM_brother2 04-16-2010 03:12 PM
Re: 1992 Eagle Talon TSI Project
 
Quote:
Originally Posted by tpunx99GSX (Post 330203)
I think its like 2 3/4. If you want it its yours for 10 bucks. LOL.
he buy your ghetto exhaust?

asshanson 04-16-2010 05:37 PM
Re: 1992 Eagle Talon TSI Project
 
Quote:
Originally Posted by tpunx99GSX (Post 335078)
All of them look in good shape, just a little cleanup on the top sides and we are good to go. !
Post up pics of your mildly dented crank.


All times are GMT -5. The time now is 08:25 AM.
Page 6 of 11 12345 6 7891011
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.