MitsuStyle - Chris's Evo

Page 5 of 6

Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)

- - Chris's Evo (http://www.mitsustyle.com/forums/showthread.php?t=31984)

GsXtUrBo98

10-03-2012 05:44 PM

Re: Chris's Evo

Lol ya but it will pay off in the end. In also replacing the stock clutch with an act 6 puck sprung disk kit.

4seasons69

10-03-2012 05:54 PM

Re: Chris's Evo

it certainly should pay off in the end! I'm living back in circle pines for now so if you ever want a hand with anything let me know

GsXtUrBo98

10-04-2012 12:10 AM

Re: Chris's Evo

Sounds good!

I'm doing a lot of running around tomorrow with going to MAP for my head studs, clutch and dropping off my turbo to be taken care of. Then its off to RS for to drop off my head studs and then to the transmission shop to drop off my oil cooler for a thorough cleaning and I'm going to ask them to keep whatever comes out of it just to see what would have been in there. I don't think there will be much if anything in there but just to be safe.

GsXtUrBo98

10-04-2012 03:02 PM

Re: Chris's Evo

Just got done running around getting parts and dropping them off! Now getting my oil cooler cleaned.

GsXtUrBo98

10-04-2012 03:07 PM

Re: Chris's Evo

Oil cooler was clean with nothing in it! better safe then sorry..

turbotalon1g

10-04-2012 03:56 PM

Re: Chris's Evo

Nice.

scheides

10-04-2012 10:28 PM

Re: Chris's Evo

Quote:

Originally Posted by GsXtUrBo98 (Post 415115)

So the timing belt tensioner tool broke off with the previous owner and he left it in there.. The piece ended up falling down and lodging it between the BS belt and Crank trigger plate bending it to the point it was making that noise..

That is unreal! Good luck man!

GsXtUrBo98

10-04-2012 10:49 PM

Re: Chris's Evo

Thanks Chris

goodhart

10-04-2012 11:20 PM

Re: Chris's Evo

Any carnage pics yet?

GsXtUrBo98

10-05-2012 10:49 AM

Re: Chris's Evo

There wasn't really any carnage.. Just the bent trigger plate that was making my spun bearing noise.. Ron said the rod bearings were starting to spin anyways so it's good that I took it out. I guess the previous owner starved it of oil at some point..

GsXtUrBo98

10-11-2012 02:33 PM

Re: Chris's Evo

Picked up my motor and clutch and turbo and dealer parts like fluid and gaskets!

mdost03

10-11-2012 04:49 PM

Re: Chris's Evo

Awesome, get it all back together now! :-D

GsXtUrBo98

10-11-2012 06:30 PM

Re: Chris's Evo

Trust me I am! can't wait!

turbotalon1g

10-11-2012 07:08 PM

Re: Chris's Evo

done yet?

GsXtUrBo98

10-11-2012 07:21 PM

Re: Chris's Evo

Negative.. Tomorrow

GsXtUrBo98

10-12-2012 06:41 PM

Re: Chris's Evo

7 Attachment(s)

Got a lot done today! motor and tranny are in the car and going to pick up the remainder of the gaskets from mitsu tomorrow. Still a lot to do but the hard part it over.

mdost03

10-12-2012 06:57 PM

Re: Chris's Evo

Yes! Almost there, keep it up! :D

GsXtUrBo98

10-13-2012 06:41 PM

Re: Chris's Evo

Got a lot more done today! tcase and axles are in and so is the turbo and battery and the entire harness is hooked up. The only thing that I dont have is the turbo to J pipe gasket... Also need oil and coolent. oh and put the tranny and tcase fluid in.

GsXtUrBo98

10-13-2012 08:16 PM

Re: Chris's Evo

2 Attachment(s)

Some progress

mike55112

10-14-2012 10:48 AM

Re: Chris's Evo

Looks like you got alot more done after I left.

All times are GMT -5. The time now is 10:42 AM.

Page 5 of 6

Show 40 post(s) from this thread on one page