Re: Project Spyder 2009 Build
 

Wait, his app. is today?

Re: Project Spyder 2009 Build
 

Dam it's going to be a warm one! Oh well I guess. I wonder if they will pre air condition the dyno bay for me :) ha

Re: Project Spyder 2009 Build
 

Throw some ice bags on the FMIC :)
Good luck, sounds like a solid build.

Re: Project Spyder 2009 Build
 

484hp 405tq at 32psi faling to 30psi with full spool at 4400rpm. Couldn't go anymore because of compressor surge. I'm happy :) Another happy Shane customer.

Re: Project Spyder 2009 Build
 

wow. awesome numbers! that's definitely 500+ at the crank...im sure if the weather was just a bit colder, maybe 500 could have been there. both ways...I want a ride in that beast! :D

Re: Project Spyder 2009 Build
 

Damn, nice numbers, 484 on shanes is serious power.

Re: Project Spyder 2009 Build
 

Glad the roads dried for the ride home, man was it a blast. He said we could of pushed it over but I said no because of compressor surge. The turbo is spooling too quick for my setup. Oh well now it's time to have fun. What kind of car to do for my next build hmmm?

Re: Project Spyder 2009 Build
 

lol, what now its at its prime and you're ready for a new project?

Great numbers Kerry!

Re: Project Spyder 2009 Build
 

Awesome dude, its been a long time in the works.

I def. want a ride and see this in action.

Re: Project Spyder 2009 Build
 

thanks guys. Anyone going to the meet tonight? I should be there.

Re: Project Spyder 2009 Build
 

Wow, those are awesome numbers man!!

That has to be the highest HP SCM61 at DB then huh? I know Mara's 1g did 485, but that is a T3.

Post up some dyno sheets!!

Re: Project Spyder 2009 Build
 

I agree, i wanna see the charts!

Re: Project Spyder 2009 Build
 

Woohoo! That is some ass-kickin power dude! I honestly was kinda thinking you might run into some problems, I'm SO HAPPY everything went smoothly! Finally some bad-ass power on a good setup. Now, keep it RUNNING and start modding that evo ;)

heh, 484whp on shane's dyno in AWD is more like 600 at the crank :)

Yup! Wagner's off of 694/81, 630-ish till 8-ish.

+1, as much as I wanna believe you, I wanna see, I wanna see!

Re: Project Spyder 2009 Build
 

charts are in my car. Will have the charts and car at the meet tonight woot!

Re: Project Spyder 2009 Build
 

damn, i won't be at the meet...for a while, softball is on wednesday's now.

Post em later, i wanna see this curve, that is awesome torque and spool, oh and HP:)

Re: Project Spyder 2009 Build
 

shane said it spools too quick for that turbo that's why I get surge right when the boost peaks at 32. Il look into an antisurge cover possibly or just no rolling into boost on the street which is fine too.

Re: Project Spyder 2009 Build
 

4" S cover ftw?

Re: Project Spyder 2009 Build
 

Def just swap in an S-cover man. The anti-surge ports will....help prevent surge! :D (amazing, I know!)

Re: Project Spyder 2009 Build
 

well I would need that and dual springs in my tial because the boost falls off to 30 by 7k. The thing is I don't think the "S" cover is a direct swap. Looks like the backing plate is different as well.

Re: Project Spyder 2009 Build
 

SP cover ftw, hopefully. Maybe bigger turbo time!!! I'm sorry I shouldn't of said that.
I can't wait to see this thing tonight.

Re: Project Spyder 2009 Build
 

If you have an E-cover, then an S-cover won't be a direct swap. From an S-cover to a ported shroud S-cover should be.

Re: Project Spyder 2009 Build
 

I just realized the same thing and came to post it LOL! Sorry. Fuk it, rock it, love it, enjoy it.

Re: Project Spyder 2009 Build
 

Full spool by 4400 and 484whp, uh yea, just rock it and enjoy it, you are faster than 99% of whats out there.

Re: Project Spyder 2009 Build
 

Nice numbers! Congrats on everything going smoothly and you making some pretty darn good power

Re: Project Spyder 2009 Build
 

PROOF!

http://www.mitsustyle.com/photopost/...an_Pic0014.jpg

http://www.mitsustyle.com/photopost/...an_Pic0015.jpg

http://www.mitsustyle.com/photopost/...an_Pic0013.jpg

Re: Project Spyder 2009 Build
 

Where's the shootout numbers? Nice work kerry, can't wait to see your next project

Re: Project Spyder 2009 Build
 

Maybe Shane will post them.

Re: Project Spyder 2009 Build
 

I sware there was a graph where we made a run and it fully spooled by 4400 rpm. Well in any case it still spools crazy and is just a blast to drive. I only have a 1 bar spring in the wastegate and am debating throwing dual springs in it to hold boost up top and see if it hits over 500 then. Besides that, I am finally done with this project besides upkeeping it and cleaning up the interior. Its daily drive ability is actually really good besides just a very small bit of studdering from the huge injectors at low speeds in a high gear and the little bit stiffer clutch but nothing that will stop me from driving it whenever. I made a good run against Halon as posted in the 2010 kills thread and did pretty good against his beast of a car.

Re: Project Spyder 2009 Build
 

Spool is all relative. Maybe it hit "full spool" at 4400 when we were running lower boost. You have 25psi before 4400. If you were only running 15psi, then you would have full spool by 4000. I don't think you need to spool any faster since it already has compressor surge. :)

Re: Project Spyder 2009 Build
 

Ya that is what I was thinking. Numbers don't mean anything. This thing is very fun, pretty fast, spools real quick, and drives amazing when I daily drive it surprisingly. Thanks Shane! Also do you have my corrected numbers graph. Someone on here was wondering what the numbers were.

Re: Project Spyder 2009 Build
 

Fuck numbers keep handing people there ass, I'm sure there are no shortage of V8 crap up by you to surprise.

Congrats dude, and that 1600 cruise miss you have is common, if you solve that you might have a secret worth some $$$.

Let me know next time you come to blaine, i want a ride.

Re: Project Spyder 2009 Build
 

You got it! It hardly misfires too under normal driving so I am very happy. It got 300% better after Shane tuned it.

Re: Project Spyder 2009 Build
 

http://www.maperformance.com/fuel-in...-easytune.html

Problem solved for $240.

Re: Project Spyder 2009 Build
 

I forgot about those, but the point in buying the old school 1600s was not to pay $500 for injectors when u could just get the IDs.
But touche.

Also that vid linked on the page shows DSMlinks individual injector and there adjustment in deadtime down to 1 microsecond increments instead of 15 microseconds, which Kerry if you have shane might be able to get those injectors even better!!

Re: Project Spyder 2009 Build
 

I agree, just drive the car and enjoy it!

Re: Project Spyder 2009 Build
 

very true! The new injectors are much much better then the old style 1600's. I'll be running the 1600's for now and maybe later this year I'll upgrade to 2150's.

Re: Project Spyder 2009 Build
 

It barely studders from the 1600's at all to the car is staying the way it is.

Re: Project Spyder 2009 Build
 

Congrats kerry! I wanna ride!

Re: Project Spyder 2009 Build
 

Come on over today and we will for a ride. An excuse to take it out I'll never turn down!

Re: Project Spyder 2009 Build
 

Lol work till 7 or 8 and I got food poisoning and feel like garbage still... got it on Friday morning.