MitsuStyle - Laser's $100 Project Thread

Page 4 of 7

Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)

- - Laser's $100 Project Thread (http://www.mitsustyle.com/forums/showthread.php?t=15565)

X Factor

10-14-2007 12:07 PM

Re: Laser's $100 Project Thread

All I can say after getting up close and personal with the laser this weekend, is that thing fuckin owns.

Kracka

10-14-2007 03:57 PM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by tim (Post 212470)

I replaced one of the coils back when I had the car due to a hesitation under boost. It seemed to fix the problem so I only replaced one of them. Maybe the other one is bad?? The coil I replaced was arcing between the terminals where the plug wires connect.

Did I ever give you the other coils I had laying around? It would be something simple to check.

Nope I didn't get that from you. Which of the two did you replace so far? I'm thinking replacing the other should be my next move.

Kracka

10-14-2007 03:57 PM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by X Factor (Post 212479)

All I can say after getting up close and personal with the laser this weekend, is that thing fuckin owns.

Haha you still need a ride in it too!

tim	10-14-2007 04:17 PM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by S2kracka (Post 212506)

Nope I didn't get that from you. Which of the two did you replace so far? I'm thinking replacing the other should be my next move.

I am not for sure which one I replaced. I got a spare coil minus the wiring and just replaced the one that I could see was arcing. Give me a few minutes to dig them out of their hiding place and I will snap some pics or something.

tim	10-14-2007 04:43 PM

Re: Laser's $100 Project Thread

2 Attachment(s)

The first is a pic of where it was arcing.

The second is a pic of what I have left. It doesnt mean that the missing one is the one I replaced though.

Kracka

10-14-2007 10:55 PM

Re: Laser's $100 Project Thread

Thanks for the info. Jeremy Hassler (armthelaser) and his wife Stacy were nice enough to donate a new coil pack to the project along with a few other misc. things the Laser has been needing. Lets hope this clears up the high-boost misfire issue so I can be at full power this weekend at the DB dyno-day!

Kracka

10-15-2007 09:35 AM

Re: Laser's $100 Project Thread

Returned front brake rotors for $40 and I only paid $30, so I'll be adding that $10 to my fund.

A//// Guy

10-15-2007 09:43 AM

Re: Laser's $100 Project Thread

Haha nice work so far, that exhaust is awesome!

Kracka

10-15-2007 09:49 AM

Re: Laser's $100 Project Thread

The stock exhaust housing and o2 housing should be sold this week at Applebees and I hear rumors of the stock cat being worth $80 at the recyclers.

Matt D.

10-15-2007 10:10 AM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by M/// Guy (Post 212593)

Haha nice work so far, that exhaust is awesome!

Just to add to the cheapness of this project I gave up on cutting all the way through the pipe to get the tip off and just bent and broke off the final inch of metal.

Kracka

10-15-2007 10:19 AM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by Matt D. (Post 212611)

Just to add to the cheapness of this project I gave up on cutting all the way through the pipe to get the tip off and just bent and broke off the final inch of metal.

I do appreciate that, it really adds a little rusty jagged flare to the rear! LOL

X Factor

10-15-2007 11:00 AM

Re: Laser's $100 Project Thread

I wonder if theres any legal liability there with some bum getting tetanus from your exhaust tip? Haha, I love it.

Kracka

10-15-2007 11:08 AM

Re: Laser's $100 Project Thread

That bum should keep his lips off my pipe unless he wants to get infected.

Matt D.

10-15-2007 11:48 AM

Re: Laser's $100 Project Thread

Hey, at least now you don't have to worry about some hobo stealing your cat.

scheides

10-15-2007 11:51 AM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by S2kracka (Post 212624)

That bum should keep his lips off my pipe unless he wants to get infected.

What about just the tip? ;)

FattyBoomBatty

10-16-2007 11:00 AM

Re: Laser's $100 Project Thread

Matt D. Cut his tip off.

Kracka

10-16-2007 11:32 AM

Re: Laser's $100 Project Thread

He got very violent with my tip.

TkrPerformance

10-16-2007 11:40 AM

Re: Laser's $100 Project Thread

matt D. was hacking at that thing for at least 30min

Matt D.

10-16-2007 11:49 AM

Re: Laser's $100 Project Thread

The tip went limp once I got a bigger tool to hack with.

TkrPerformance

10-16-2007 08:09 PM

Re: Laser's $100 Project Thread

dident you end up ripping it off the last little bit

Matt D.

10-16-2007 09:01 PM

Re: Laser's $100 Project Thread

Yeah, but it was pretty stiff before I put the bigger tool to use.

Kracka

10-17-2007 08:10 AM

Re: Laser's $100 Project Thread

I ended up replacing the coilpack last night and it helped, but its still not liking anything above 13 psi. When I get some more money in the fund from selling off stock parts I plan to get an AFC so maybe that will help.

Kracka

10-20-2007 06:43 PM

Re: Laser's $100 Project Thread

178 whp and 184 wtq at only 12 psi! As soon as I get a S-AFC I'll be able to richen it up (it was running an A/F ratio around 14:1), up the boost, and hopefully see even more power.

Shane at DB was also nice enough to give me a Supra sidemount intercooler with custom metal endtanks so that should also yield a nice gain!

FattyBoomBatty

10-20-2007 06:48 PM

Re: Laser's $100 Project Thread

Sweet, you should trade your mangina virginity for hardpipes. no pun intended.

Kracka

10-20-2007 06:51 PM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by FattyBoomBatty (Post 213491)

Sweet, you should trade your mangina virginity for hardpipes. no pun intended.

I'd like to eventually, but we'll see what the budget looks like and what kind of hacking/fabbing its going to take to get the stock IC pipes hooked up to the SSMIC.

95talonracer

10-20-2007 08:55 PM

Re: Laser's $100 Project Thread

What plugs are you running in there?

JET	10-20-2007 10:26 PM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by S2kracka (Post 213492)

I'd like to eventually, but we'll see what the budget looks like and what kind of hacking/fabbing its going to take to get the stock IC pipes hooked up to the SSMIC.

JCWhitney has mild steel bends pretty damn cheap.

Kracka

10-21-2007 12:48 AM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by 95talonracer (Post 213498)

What plugs are you running in there?

NGK BPR7ES gapped at .026". Once I get all the issues sorted out I plan to widen the gap to .030". again.

Kracka

10-22-2007 12:10 AM

Re: Laser's $100 Project Thread

I picked up a set of EVO VIII 560cc fuel injectors today for $50!

FattyBoomBatty

10-22-2007 09:46 AM

Re: Laser's $100 Project Thread

Sell the stock ones for 40 bucks and you only spent 10!

Kracka

10-22-2007 09:52 AM

Re: Laser's $100 Project Thread

Anyone have an AFC they want to sell?

Kracka

10-22-2007 11:40 PM

Re: Laser's $100 Project Thread

I just picked up another set of Evo injectors for $50 plus I also got a S-AFC for $75 shipped!

JET	10-22-2007 11:57 PM

Re: Laser's $100 Project Thread

Are you going to sell the 2nd set for over $50 to help pay for the SAFC?

Kracka

10-22-2007 11:58 PM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by JET (Post 213801)

Are you going to sell the 2nd set for over $50 to help pay for the SAFC?

Yup, they are worth about $100-150 on eBay.

Kracka

10-23-2007 12:00 AM

Re: Laser's $100 Project Thread

double-post

Kracka

10-23-2007 12:01 AM

Re: Laser's $100 Project Thread

Anyone have extra stock 1G and 2G IC piping laying around? I'm going to need to piece something together in order for this Supra SMIC to work. Maybe I should have some cheap metal pipes fabbed up... Mark? JET? Who wants beer/pizza?!?!

jhaan_dude

10-23-2007 12:24 AM

Re: Laser's $100 Project Thread

NGK BPR6ES is what you should run with anything more than 15psi. and is that damn thread ever gonna die!?!?!?!?

Kracka

10-23-2007 12:49 AM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by jhaan_dude (Post 213806)

NGK BPR6ES is what you should run with anything more than 15psi. and is that damn thread ever gonna die!?!?!?!?

Check your facts son. The 6ES's are stock 1G DSM plugs, lightly modded DSM's should step one heat range cooler to the 7ES's.

JET	10-23-2007 02:31 AM

Re: Laser's $100 Project Thread

Quote:

Originally Posted by S2kracka (Post 213804)

I have some stock pipes/hose laying around you could have. Maybe even some 2.5" mandrel bends I would donate to the cause.

Kracka

10-23-2007 07:55 AM

Re: Laser's $100 Project Thread

That would be awesome!

All times are GMT -5. The time now is 12:19 AM.

Page 4 of 7

Show 40 post(s) from this thread on one page