Re: head fused to the block ?
 

nice man^

Re: head fused to the block ?
 

When I just took mine off it wouldn't budge without removing the washers on the ARP's

Re: head fused to the block ?
 

All washers move freely except 4 one. I honestly believe the on stubborn stud and washer is the issues.

I wish I knew how to post picks. Cause id post the pick of the bar my freind and I bent trying to lift the head.

That thing is on there. Lbvs

Re: head fused to the block ?
 

We got it off !

Head dosent look too bad. Alot of corrosion. Head has to be warped

Re: head fused to the block ?
 

Well damage report? and how did you get her off?!

Re: head fused to the block ?
 

Got as many studs out as we could then pried like hell with a 3' pry bar, used the power steering bracket for leverage.

He's going to have to pull the motor now and hone the cylinders and re-ring it though, there was some surface rust on the cylinder walls from coolant getting in and sitting.

Re: head fused to the block ?
 

Ended up removing all the head studs except 3 (stripped ones)

Then used a 3 1/2 ft pry bar.

Hammer and elbow grease.

She finally lifted up. I have pics. But I dont know how to post them :/

Alot of corrosion!

Definitely going to need to hone the block. Guessing the head is trash ?

But didnt see anything melted. And the weird part is all the fire rings on the head gasket were intact ???

Re: head fused to the block ?
 

Definatly get your head checked for cracks!

Re: head fused to the block ?
 

I have a 1G head for sale in good condition. came off a good running motor. $140/obo.

Re: head fused to the block ?
 

is that head a virgin and strait^

Re: head fused to the block ?
 

any chance that the block is now warped to?

Re: head fused to the block ?
 

Well, the 3 remaining head studs that did not want to come out were VERY tough to turn with a vicegrips on them. I don't know if that means that the block could be warped and making the holes oval shaped or what?