Re: Project V8killa
 

6466 =

http://perrysburgblog.com/wp-content.../03/Kaboom.jpg

Re: Project V8killa
 

6466 =
http://perrysburgblog.com/wp-content.../03/Kaboom.jpg

Re: Project V8killa
 

That just happened.

I was told by someone here that once you go T3, pick the smallest turbo you need to hit your goal and you will be happy with the powerband/spool.

I've seen the 5858 first hand and on a 2.0L its a bad mother, but I think on a 2.4 assuming it can keep up with the motor up top, I guess cams, head, smim come into that it will be awesome. It did 510 thru an auto at 32psi spike just to see how much the injectors would keep up. I know if that was a 5 spd car it would do 570whp DJ all day. That's shitty cams, FMIC and stock intake.

Re: Project V8killa
 

god damn that pic is awesome!

Ill probably go with the 5862 BB this will all be with a 280/280 ported head, SMIM, ETS race FMIC (short route), and side exit exhaust.

Im hoping flow will not be an issue with the setup

Re: Project V8killa
 

I got to say I'm scared to make the purchase on one, because I don't want to buy 2 new turbos. I have a lead on a temp manifold for mine...

Also I'd get the 5858 over the 5862, something about mismatched wheels rubs me the wrong way.

I didn't realize that 62 is a cea wheel, i know the 58 is. My vote is the 5858 and sacrifice a possible 20whp. (going off PTEs ratings)

Re: Project V8killa
 

yeah but people are haveing success with the 6266 there mismatched so i dont think it would be a big deal.

Yeah the 5862 does have the new wheel

Re: Project V8killa
 

Oh the 6266 is fucking fantastic don't get me wrong, and its 80% for sure what i'm going with on a stroker, but the results from the 5858 are tremendous.

The 5858(no CEA turbine) and 5862(CEA compressor & turbine) both have the new wheel. My point was balanced turbos seem to do the best that is all.
I don't know if you mentioned and i'm sure you did, but is it T3? I'm thinking of doing T4.

Re: Project V8killa
 

Yeap the mani I bought is a t3 and going with a t3 4" SP IN .82A/R 3" vband out.

I get what your saying about having balance wheels though

Re: Project V8killa
 

Where have you seen this? All of the research I have done shows that the 58 turbine wheels are not billet. The 5862 is a full CEA, but the 5858 has a cast turbine wheel from what I have found. If the 5858 is now full billet, then that is the perfect turbo for what I am looking at.

Re: Project V8killa
 

I just looked at their site, it is not.

I was told by someone that the 5858 has the cea wheel in it. weird because it used to be a 5857, i wonder how much that 1mm made a diff.

Re: Project V8killa
 

Jet I think the 5557 has CEA wheels. At least that's what the STM site shows.

Re: Project V8killa
 

The 57 turbine wheel is not CEA either. The smallest they have so far that I have seen is the 62. I am a bit shocked they aren't making a smaller one for all the honda guys.

Re: Project V8killa
 

This is the turbo I was talking about.

http://www.streettunedmotorsports.co...5557_turbo.htm

Says it's the new cea tech.

Re: Project V8killa
 

holy shit this is my old shell I sold to Jungy. lol

Re: Project V8killa
 

Yeap.

Re: Project V8killa
 

How's this coming?

Re: Project V8killa
 

All the stuff is at gosh. Should be a couple weeks yet till it's done. He had the parts since last Monday.