MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   GsXtUrBo98's 2G project thread (http://www.mitsustyle.com/forums/showthread.php?t=22450)

mike55112 07-13-2009 07:27 PM

Re: The new setup for spring!
 
You have tried everything except the waterpump, just get it over with and replace it. Its not to bad and map should warranty it

GsXtUrBo98 07-13-2009 07:53 PM

Re: The new setup for spring!
 
I have done everything except drill a hole in the thermastat and put it back in... and also i havent done a pressure test yet either.

4seasons69 07-13-2009 09:41 PM

Re: The new setup for spring!
 
i've got a pressure tester if you want to do a pressure test. just give me a call or shoot me a text

GsXtUrBo98 07-13-2009 09:53 PM

Re: The new setup for spring!
 
well I'm done with messing around with this and am going to drop it off at map tomorrow after work... I'm so unsatisfied about it all and want them to fix what is needed

mike55112 07-13-2009 11:25 PM

Re: The new setup for spring!
 
HOpe you get it back soon.

GsXtUrBo98 07-14-2009 07:32 AM

Re: The new setup for spring!
 
Quote:

Originally Posted by mike55112 (Post 297473)
HOpe you get it back soon.

So do I as to its my dd.... I know it shouldnt be but it is..

mike55112 07-14-2009 03:56 PM

Re: The new setup for spring!
 
Quote:

Originally Posted by GsXtUrBo98 (Post 297497)
So do I as to its my dd.... I know it shouldnt be but it is..

I know how that is. I need to find myself something else to drive to work everyday.

GsXtUrBo98 07-27-2009 08:39 PM

Re: The new setup for spring!
 
Ok well I thought that I updated all of you on this thread but I guess not.. For those of you that know me... I made 442awhp and 378awtq on maps dyno on 29psi I wanted more but was told that my intercooler was the number one thing that is keeping me from more hp! Its the Greddy 24v LONG ROUTE.... O well guess I need to start saving for the ETS race intercooler that I was looking at..

GsXtUrBo98 07-29-2009 12:57 AM

Re: The new setup for spring!
 
http://webmail.aol.com/43792/aim/en-...=1895&z=284858

asshanson 07-29-2009 01:08 AM

Re: The new setup for spring!
 
Pic doesn't work.

blackrosenova400 07-29-2009 02:12 AM

Re: The new setup for spring!
 
If your still overheating, and your fans arent moving air well, voltage drop your fan circuit. Adding another fan to the circuit would make it worse working on the same wires if you have a bad voltage drop.

GsXtUrBo98 07-29-2009 02:45 PM

Re: The new setup for spring!
 
Quote:

Originally Posted by blackrosenova400 (Post 299108)
If your still overheating, and your fans arent moving air well, voltage drop your fan circuit. Adding another fan to the circuit would make it worse working on the same wires if you have a bad voltage drop.


No, im cooling fine now!

GsXtUrBo98 07-29-2009 03:27 PM

Re: The new setup for spring!
 
Quote:

Originally Posted by asshanson (Post 299095)
Pic doesn't work.


I thought that I got it to work but guess not and now I cant even get it to load onto photobucket because it says that the format is wrong...!

Chengy 07-30-2009 01:52 AM

Re: The new setup for spring!
 
What was the cooling problem?

Nice numbers man... Have you raced Vandde yet? LOL

GsXtUrBo98 07-30-2009 12:00 PM

Re: The new setup for spring!
 
Quote:

Originally Posted by Chengy (Post 299227)
What was the cooling problem?

Nice numbers man... Have you raced Vandde yet? LOL

I needed a stock fan back in there to cool better and it works perfect. Also, had to rewire the fans up and run 1 12" mishimoto and the stocker onthe passenger side... had to weld a 90 degree elbow on the turbo and move the intercooler piping a little bit to make it fit though..

No I havent raced vandde yet and wont for the time being.. I want my tranny to hold up for the cookout.. Also, dont want to launch it till I get my shep stage 4 this winter I just dont want the problems..

mike55112 07-31-2009 12:06 AM

Re: The new setup for spring!
 
Quote:

Originally Posted by GsXtUrBo98 (Post 299275)
I needed a stock fan back in there to cool better and it works perfect. Also, had to rewire the fans up and run 1 12" mishimoto and the stocker onthe passenger side... had to weld a 90 degree elbow on the turbo and move the intercooler piping a little bit to make it fit though..

No I havent raced vandde yet and wont for the time being.. I want my tranny to hold up for the cookout.. Also, dont want to launch it till I get my shep stage 4 this winter I just dont want the problems..

stop being a pussy and launch the bitch, thats what its made for.

sleepydsm 07-31-2009 02:46 AM

Re: The new setup for spring!
 
Quote:

Originally Posted by GsXtUrBo98 (Post 299275)
I needed a stock fan back in there to cool better and it works perfect. Also, had to rewire the fans up and run 1 12" mishimoto and the stocker onthe passenger side... had to weld a 90 degree elbow on the turbo and move the intercooler piping a little bit to make it fit though..

No I havent raced vandde yet and wont for the time being.. I want my tranny to hold up for the cookout.. Also, dont want to launch it till I get my shep stage 4 this winter I just dont want the problems..


Listen to yourself.....

GsXtUrBo98 07-31-2009 06:45 PM

Re: The new setup for spring!
 
I think I will just because.. like I said I dont wanna miss the cookout because my need to really test out my car.

mike55112 07-31-2009 06:57 PM

Re: The new setup for spring!
 
DO it after the cookout.

GsXtUrBo98 07-31-2009 06:58 PM

Re: The new setup for spring!
 
Maybe I will...................


All times are GMT -5. The time now is 11:48 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.