Re: Swifty's never-ending project thread!
 

Looks good! Where did you get the fuel pumps from and did you use any special connector to wire them up?

Re: Swifty's never-ending project thread!
 

i got them through the dealership from ford..and i wired them myself.

-A. Swift

Re: Swifty's never-ending project thread!
 

And you're scared of a little engine wiring?

Re: Swifty's never-ending project thread!
 

lol i want good clean wiring, and we where trying to find out why my car never revved..if I REALLY HAD to tackle the wiring, i woulda done it myself, as I do on customer's cars at work, BUT i'd rather have John do it, as it's proper, and he has the correct tools for the right job.

-A. Swift

Re: Swifty's never-ending project thread!
 

Shouldn't you too, as a mechanic? It's just a matter of being in a little more debt to the tool guy of your choice.

Re: Swifty's never-ending project thread!
 

yea i know..which i hate. I loose motivation to work on my own shit when thats all i do. So, John was the motivator!

Re: Swifty's never-ending project thread!
 

Shit.. I did my whole tuck with electrical tape and scissors!

Re: Swifty's never-ending project thread!
 

Glad you will finally get this done, setup looks baller.

Glad that you also stopped sending me pic messages of your shit.

So 10s this year?

Re: Swifty's never-ending project thread!
 

lol sorry buddy. As far as the time, we shall see...remember, i've never done the drag stuff at a track. on these tires, 10's would be balla status!

-A. Swift

Re: Swifty's never-ending project thread!
 

Wait, you track this car?

Re: Swifty's never-ending project thread!
 

That's the goal anyway...

-A. Swift

Re: Swifty's never-ending project thread!
 

not really, you make enough power and the guy you copied did.

good luck either way.

Re: Swifty's never-ending project thread!
 

copied? yeaaaa....riiiight. cuz the wheel can be re-invented SO many times. I've copied no one, besides my own ideas. so what if others have had a black talon with a 67mm turbo and etc etc on it..know how many white 1gs with cf hoods and 16g's there are?

Anyway, more wiring is done tonight. Intake manifold and pipes are now on as is the tb, with all gaskets and such. vac. lines are all run. FJO is moved/mounted. Just needs power/ground. MSD is mounted in the car now, wiring is done. Grounds are all done.

list of what's left:
finish wires for COP/MSD
+/- for FJO
clamps for rest of pipes
WG mounted
degree cams/put timing side back together/vc gasket/etc
bumper/lights go back on
pass. seat back in/harnesses remounted
swap gasses
mod AEM map
start.

Hopefully this coming weekend, it will be ready. That's all for now!

-A. Swift

Re: Swifty's never-ending project thread!
 

New dual spring WG, dump tube, and intercooler coupler clamps are all on. Car should be finished up later today. And, running. Then i'll button it all up. The REAL trick will to be if I can take/send/post a vid with my phone. ;)

-A. Swift

Re: Swifty's never-ending project thread!
 

Sweet, can I have a ride sometime!?

Re: Swifty's never-ending project thread!
 

Sure! Oh, I also ordered that same filter you got..9" long, 4" inlet KN filter..Should be here monday. We still gotta mock up an intake pipe, but that's not a super high concern.

-A. Swift

Re: Swifty's never-ending project thread!
 

A certain evil eagle circa 2004 comes to mind, but i have not seen any white 1gs with fiber hoods, black evo wheels on 16g running 11s all day. There are a few panda 1gs around here but everyone that calls me thinking that its me says they get close and they are piles.

Anywho, you gonna be ready for the cruise? I am gonna look for a good video camera be a good time to get some footage of some good rolls.

You, hill, halo would make for a good 3 way

Re: Swifty's never-ending project thread!
 

If I can get it on the rollers, the cruise is a go. I'm jsut shooting to knock Peter's new Audi down ;)

-A. Swift

Re: Swifty's never-ending project thread!
 

I hope that is sarcasm or you must not be looking that hard. That was 2007's hot street setup color/combo.

Re: Swifty's never-ending project thread!
 

Yeah it was don't worry. Plus we all know i didn't decorate the car apart from the sweet wheels and way better hood latches.