|
Re: Mark's 1G Winter Projects
Woot!! Cant wait to see it!
|
Re: Mark's 1G Winter Projects
MAP has the head done! I'm on my way back to the US from a business trip in Ireland. Guinness is good stuff! The plan is to get the engine assembled on Monday and drop the engine in Wednesday night. Then hopefully wrap it up and start it Thursday night to load on the trailer. I need to verify the tracking number on the clutch, in case its signature only so I can get it held at ups. That could screw me up.
|
Re: Mark's 1G Winter Projects
^ That equals awesome. Its nice to hear map performance still coming through asap for some customers.
|
Re: Mark's 1G Winter Projects
It's alive! Car is ready for the prooving grounds and loaded on the trailer. See everyone this weekend!
|
Re: Mark's 1G Winter Projects
See you up there man.
|
Re: Mark's 1G Winter Projects
Good luck both of you, here are to some 8s!
|
Re: Mark's 1G Winter Projects
Quote:
Quote:
Three is a party?! There is going to be nothing but 3rd gear pulls from the mitsu camp on Saturday lol. See you guys tonight! |
Re: Mark's 1G Winter Projects
Results?
|
Re: Mark's 1G Winter Projects
I got beat by Nate on the first round of eliminations. I figured out that I need to make more boost at the line. It only made 3-4 psi on the 2 step, due to the displacement loss. The goal is to leave at around 15psi, it will make all the difference in the world. The tune is coming along, it went 165mph on a couple of passes. The good news is that the car is 100% and ready for the next event.
|
Re: Mark's 1G Winter Projects
Quote:
|
Re: Mark's 1G Winter Projects
I'm curious as well. Have you ever had it at the shootout?
|
Re: Mark's 1G Winter Projects
It's going to get real this weekend!
Well it has been a crazy week! Last weekend I went to the Muscle Car Shootout. I wanted to have fun and also get the car ready for the MAP event. My focus was to improve my launch. I knew I needed to make more boost on the line to improve my 60 foot. A special thanks to Nate with the rowdy Civic to light a fire under my ass to get working hard on dialing this thing in. He beat me in eliminations at the last MAP event, and deserved the win! Also, we have a friendly competition to improve our times and performance. What’s changed since Map 2K15.1? Lots of stuff with the tune, more boost capability, drag style anti-lag, and my seat time to get it all put together! I lost an elimination round race this last weekend due to a stock front axle breaking. It also took out the output shaft for the rear inside of the transmission. Thanks goes out the John (Pushit 2.0) for helping me out with an extra shaft! A MAJOR shout out to Dan at MAPerformance to help me source a set of 1000hp front DSS axles in time for the 2K15.2 proving grounds weekend! I have never put power to the ground like this ever! Check this out: https://www.youtube.com/watch?v=0wrES3UHDUs The new axles and 50 psi will make this all crazy town this weekend!!!!!! Looking forward to seeing you all there! |
Re: Mark's 1G Winter Projects
That sounded messy! lol.
Do you run a certain class at MCSO? I was just thinking I've never seen that event and would like to run in it if I could. (i need slow classes) Do you foresee any other things getting in your way this upcoming weekend? Good luck! |
Re: Mark's 1G Winter Projects
Ohhhh most definitely going to PG now. Can't wait to see what goes down.
|
Re: Mark's 1G Winter Projects
That'll be to see this beast run this weekend!
|
Re: Mark's 1G Winter Projects
Quote:
170mph..........:Banane55: |
Re: Mark's 1G Winter Projects
170! :ring:
|
Re: Mark's 1G Winter Projects
Cool, hope to see some of your passes this weekend. I'll be up there running significantly slower times than you, lol.
|
Re: Mark's 1G Winter Projects
In for 170mph time slip
|
Re: Mark's 1G Winter Projects
I had fun at the MAP weekend, unfortunately my car didn't work out as hoped. As for the positives over the weekend, I turned the boost up to 50 psi. The first pass where I drove it off the line with no launch it went 167.49 mph. The addition of 4 psi more boost added 2-3 MPH. I took out 1.5 degrees of timing when I did this to be safe. I had plans on adding a little back in to see if it kept picking up MPH.
Wade completed his license passes, finally! It was an epic rush to get the required passes in on Sunday. He ran 4 passes in about 45mins, requiring a team effort. It was cool to participate and get all the passes in. Pre Celebration: http://i412.photobucket.com/albums/p...912_172225.jpg The bad: I learned just how critical a good alignment is. I broke rear support tube to the third member differential last week at the muscle car shootout. I welded it back in place, however it effected the rear alignment. I first noticed it at the track when I unloaded the car. Fail! It made the car go all over the track. I needed to drive the shit out of the car to make a pass. The ugly: I launched the car on the first pass Saturday, it bogged a little bit, between the 330 and 1/8 mile my drive shaft U joint broke at around 115 MPH. It beat up the under side of my car, and scared the shit out of me! this was the only original joint in the drivetrain! I looked up failure modes, Spicer had a white paper on failure modes. I appears that grease, torque, and application are a contributing factors for burnt/melted cross points. The plan is to go to the larger 3000GT driveshaft connection to the rear. http://i412.photobucket.com/albums/p...912_134230.jpg It is all correctable and will be better than ever now when it hits the track next time! |
| All times are GMT -5. The time now is 08:50 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.