Re: 91 Galant VR4
 

I want to drive the car to the dyno day, if its tuned I will put it up for some numbers. We will be putting in a full week in the garage to get it ready.

The down pipe is 4", and the turbo is a GT4202.

~John

Re: 91 Galant VR4
 

What kind of numbers are you shootin for?

Re: 91 Galant VR4
 

Last year the setup made 650awhp with 38psi and E-85. This year I plan to run E98 and I want to turn the boost up until we find the bottle neck in the setup. I think at 50psi on E98 the car could make 850ish, we will see though.

~John

Re: 91 Galant VR4
 

Candidate for 'Name Dat Powa'?!?!?! :D

Re: 91 Galant VR4
 

Fucking Beast Mode right here.

Re: 91 Galant VR4
 

and if you blow you head gasket you gonna oring the block and push 80psi lol!! but seriously 50psi!! WOOAHHHHH!!!!!

Re: 91 Galant VR4
 

Perma torque head gasket, head is within .0015" of flat, and the block was decked in a $150,000 dollar Sunnen V30, torqued down with A1 Technology head studs. It should handle what ever the turbo can throw at it.

~John

Re: 91 Galant VR4
 

1 Step closer.

http://www.mitsustyle.com/photopost/...photos_093.jpg

Tranny and most of the under side is done.

http://www.mitsustyle.com/photopost/...photos_094.jpg

Just a few more things under the car to finish.

http://www.mitsustyle.com/photopost/...photos_096.jpg

Inter cooler, hear exchanger, radiator, and a few other items to finish this up.

http://www.mitsustyle.com/photopost/...photos_097.jpg

FIC Blue Max 2150 Injectors installed, I just shortened the fuel rail mounts and removed the plastic spacers, then added studs to bold the rail down.

http://www.mitsustyle.com/photopost/...photos_110.jpg

So after the car makes 850 some AWHP and takes the fastest Galant VR4 record I plan to enjoy this with the friends and family that helped make this car possible.


So just a few more things to finish up, I hope to start the car up tomorrow.

~John

Re: 91 Galant VR4
 

The car started last night, now I just need to do an oil change and go do some vacuum pulls to break in the motor.

~John

Re: 91 Galant VR4
 

AWESOME!!

Re: 91 Galant VR4
 

amazing! You definitely need that johnny walker right there lol.

Re: 91 Galant VR4
 

You better not kill me tonight :)

Re: 91 Galant VR4
 

Wahoo! Be careful guys! See you (and the car I hope) saturday!

Re: 91 Galant VR4
 

Testing in the rain tonight?

Re: 91 Galant VR4
 

It would have been for drivability, but the weather got the best of us, the car has no blower motor, window defrost, or wipers.

On a plus the car should be up at DB saturday if its not raining hard.

~John

Re: 91 Galant VR4
 

Awesome!!

Re: 91 Galant VR4
 

Don't Dyno before 12:30. I want to see this thing rip.

Re: 91 Galant VR4
 

http://www.mitsustyle.com/photopost/..._6829925_n.jpg

I was able to drive the car up to the MitsuStyle dyno day for some motor break in miles. Its about a 16mile round trip and the car drove it with out a hitch. My friend Ryan was able to ride with me for the cars first drive this year.

A few things I learned on this drive, the cold can be an issue, as I do not have a blower motor or heater core.

The coolant temps do not stay above 180 while driving down the road at high way speed, and if I turn the radiator fan an the coolant temps drop quick.

The oil temps even with running about 30psi less oil pressure then last year are up around 30-40 deg F while driving around, it was about 200 deg driving home, which any good synthetic oil can handle with out an issue. So we can see a big change in adding this much hard block to the motor, the oil is doing a lot more cooling then last year. And if the oil temps get hotter then 220 while dynoing I will just add an oil cooler and that should take care of the oil temps.

I will have some dyno time setup for later this week, then there are a few days at Grove Creek before the end of the month, I want to get the 60' working before we head back to Rock Falls, which there is a day on June 4th at the Rock I would like to get to, but we will see.

~John

Re: 91 Galant VR4
 

awesome man. keep it up! i wanna hear this beast

Re: 91 Galant VR4
 

Dyno time is setup, so if it goes well I will be heading to the track Saturday for 60' testing.

~John