![]() |
Re: Chris's Evo
Lol ya but it will pay off in the end. In also replacing the stock clutch with an act 6 puck sprung disk kit.
|
Re: Chris's Evo
it certainly should pay off in the end! I'm living back in circle pines for now so if you ever want a hand with anything let me know
|
Re: Chris's Evo
Sounds good!
I'm doing a lot of running around tomorrow with going to MAP for my head studs, clutch and dropping off my turbo to be taken care of. Then its off to RS for to drop off my head studs and then to the transmission shop to drop off my oil cooler for a thorough cleaning and I'm going to ask them to keep whatever comes out of it just to see what would have been in there. I don't think there will be much if anything in there but just to be safe. |
Re: Chris's Evo
Just got done running around getting parts and dropping them off! Now getting my oil cooler cleaned.
|
Re: Chris's Evo
Oil cooler was clean with nothing in it! better safe then sorry..
|
Re: Chris's Evo
Nice.
|
Re: Chris's Evo
Quote:
|
Re: Chris's Evo
Thanks Chris
|
Re: Chris's Evo
Any carnage pics yet?
|
Re: Chris's Evo
There wasn't really any carnage.. Just the bent trigger plate that was making my spun bearing noise.. Ron said the rod bearings were starting to spin anyways so it's good that I took it out. I guess the previous owner starved it of oil at some point..
|
Re: Chris's Evo
Picked up my motor and clutch and turbo and dealer parts like fluid and gaskets!
|
Re: Chris's Evo
Awesome, get it all back together now! :-D
|
Re: Chris's Evo
Trust me I am! can't wait!
|
Re: Chris's Evo
done yet?
|
Re: Chris's Evo
Negative.. Tomorrow
|
Re: Chris's Evo
7 Attachment(s)
Got a lot done today! motor and tranny are in the car and going to pick up the remainder of the gaskets from mitsu tomorrow. Still a lot to do but the hard part it over.
|
Re: Chris's Evo
Yes! Almost there, keep it up! :D
|
Re: Chris's Evo
Got a lot more done today! tcase and axles are in and so is the turbo and battery and the entire harness is hooked up. The only thing that I dont have is the turbo to J pipe gasket... Also need oil and coolent. oh and put the tranny and tcase fluid in.
|
Re: Chris's Evo
2 Attachment(s)
Some progress
|
Re: Chris's Evo
Looks like you got alot more done after I left.
|
Re: Chris's Evo
Ya I kept on going
|
Re: Chris's Evo
Quote:
|
Re: Chris's Evo
fast swap man, i like your garage!! good inventory
|
Re: Chris's Evo
Good job Chris!
|
Re: Chris's Evo
Thanks guys!
|
Re: Chris's Evo
Couldn't have done a lot of it without mike. So thanks mike!
|
Re: Chris's Evo
Ok so... Dun dun dun.. MY CAR IS ALIVE!!!!
|
Re: Chris's Evo
Quote:
|
Re: Chris's Evo
So far so good! No issues. Knocks on wood :)
|
Re: Chris's Evo
I put over 50 miles on it today with no issues and babying the hell out of it besides the vac pulls that I did.
I got oil to do my first oil change at 100 miles! I'm also going to be picking up some evo 9 gsr wheels with some winter tires! P.S yes at this point I'm going to drive my evo in the winter... |
Re: Chris's Evo
Woohoo!!!!
|
Re: Chris's Evo
Awesome job on getting it up and running so quickly!
|
Re: Chris's Evo
Quote:
|
Re: Chris's Evo
I put 125 miles on the car and went to do my oil change and the tcase fill plug had fallen out! I ordered a new one and that should be here on thursday. I also picked up a set of evo 9 gsr wheels with michelin xice 2 tires on them from Ron today!
|
Re: Chris's Evo
Haha thats still decently quick for how busy life seems to get. You driving the 2g when the evo was down?
|
Re: Chris's Evo
Quote:
|
Re: Chris's Evo
Quote:
Quote:
|
Re: Chris's Evo
Quote:
|
Re: Chris's Evo
haha. Well I got the car back on the road yesterday and its way different. When I originally got my car together I it was VERY hard to drive and I thought that the new ACT 6 puck sprung disc was the problem and I hated it.... Anyways after getting fluid back in the t case and back on the road everything was perfect and the car drives like a dream!! so excited to finish breakin on this thing!!
|
All times are GMT -5. The time now is 03:46 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.