Re: Carl's 98 auto AWD project Black Magic
 

hahahaha this ^

Re: Carl's 98 auto AWD project Black Magic
 

Hey now dudes, Swifty seems to be on his way to the track from what I have seen lately, but who knows! Sorry for the OT chit chat.

Carl, I would like a ride in an ef1 auto car. Nick only did like one pull when I road up the last little stretch to brainerd :(

My crapstang wont even come close to keeping up with these little auto cars lol

Re: Carl's 98 auto AWD project Black Magic
 

He still needs to put a chute on and wash his firesuit, but hell be there in no time!! pause not

Re: Carl's 98 auto AWD project Black Magic
 

He's always "going" to go to the track....then never does.

Re: Carl's 98 auto AWD project Black Magic
 

Master rebuild kit, Kickdown band, and Kiggly 5-friction front clutch are on the way. I will probly get the center diff welded and remove VC while I'm in there. Does anyone know where I can get shot peening done for the gears?

Re: Carl's 98 auto AWD project Black Magic
 

Still got that LSD rear diff. if you need it? I'm gonna Dave it otherwise till I find an auto spyder.

Re: Carl's 98 auto AWD project Black Magic
 

Thanks, but all the funds I have are going twards the rebuild. I am in the market for a restalled torque converter if anyone knows of one for sale.

Re: Carl's 98 auto AWD project Black Magic
 

TRE is the only place I know for shot peening gears.

Re: Carl's 98 auto AWD project Black Magic
 

Is that the local shop you were thinking about going with? I have also heard good things about midwest performance converters. I am really just hopeing to find a deal on a used one though.

Re: Carl's 98 auto AWD project Black Magic
 

TRE is in Michigan.

Re: Carl's 98 auto AWD project Black Magic
 

Master rebuild kit and Kiggly 5-friction front clutch showed up this week. I am planning on getting some work done on the transmission this week since I'm not working. I am still looking for a restalled 2g torque converter.

Re: Carl's 98 auto AWD project Black Magic
 

BIR next wed?

Re: Carl's 98 auto AWD project Black Magic
 

I wish, but I doubt the car will be together by then. I have little modivation when its this hot.

Re: Carl's 98 auto AWD project Black Magic
 

I did some work on the transmission today. I got all the clutch packs replaced and installed new seals on everything. I also found a broken seal on the front clutch apply piston. and a the Kickdown band was broken. Hopefully I have found all the issues and the cause of the burnt out front clutch pack.

Re: Carl's 98 auto AWD project Black Magic
 

sweet, keep at it and we can roll to BIR!

Re: Carl's 98 auto AWD project Black Magic
 

I had to order a different thickness retaining ring for the front clutch pack that wount be here till next thurs. So no BIR for me. Might try for sept 15th. But I will probly be be broke by then since I keep buying more and more parts. I have a line on a converter and I am leaning twards the S90 TB.

Aaron have you driven your car mutch with the restall? how do you like it? have you tryed stalling it?

Re: Carl's 98 auto AWD project Black Magic
 

So far so good, it's weird because it feels tighter driving around town,but looser on the highway.
Either way I'm liking it, I did try to stall it once and it worked really good compared to stock, I'm hoping to tune the launch this weekend.

Re: Carl's 98 auto AWD project Black Magic
 

The transmission is mostly back together I'm just waiting on getting my center diff welded. I was on the fence about welding the center diff because I want to keep the car as "streetable" as posable. But after opening up the ceter diff and inspecting it I am definitly welding it. the gears shims and shafts all show sighns of wear so I think it was just a matter of time till it failed.

I also got my Evo 3 intake manifold and Ebay S90 throttle body installed. hopefully everything will be ready to put the motor/trans back in next weekend.

Re: Carl's 98 auto AWD project Black Magic
 

Nice work.

Re: Carl's 98 auto AWD project Black Magic
 

Sweet, another Evo3 mani. I'm more than loving mine.

Re: Carl's 98 auto AWD project Black Magic
 

IT RUNS AND DRIVES!! put 15-20 miles on it tonight and it works great. The transmission is shifting better then it ever has. I have a little adjusting to do with the Knockoff S90 Throttle body but the idle is already rock solid. I will try to get some pics up of the new intake/ Throttlebody setup in the car soon.

Re: Carl's 98 auto AWD project Black Magic
 

Nice! How are you liking the welded center diff? I love mine, I'm sure its not so bad with an automatic right?

Re: Carl's 98 auto AWD project Black Magic
 

The only time I really noticed the welded center diff was backing out of my driveway. It felt Like the car wanted to stop. I 'm sure I will get used to it or change my driveing style.

Re: Carl's 98 auto AWD project Black Magic
 

Yeah, I got used to it pretty quickly, even without power steering I really like it.

Re: Carl's 98 auto AWD project Black Magic
 

Welded center diff in my 1st GVR4 500AWHPish + a good hook did this:

I snapped my transfercase output shaft in the yoke.

We had to weld that chunk of scrap to it and hammer it out.

look at how it twisted the splines...I cant be the only one right?

I felt kinda proud and defeated at the same time because it was the rare JDMyo switchable one. I have fields of regular transfer cases.

Great build! keep it up!

Re: Carl's 98 auto AWD project Black Magic
 

Ive Drove the car off and on over the weekend and to work today. I had to fix one small leak on the end clutch cover, but other then that the car has been working great. It shifts nice and firm now I'm not sure how I like the welded center diff. Alot of binding and poping and clunking during slow speed turns. No difference at road speed. As long as everthing stays good I am probly going to BIR on saturday for one last race this season.

Re: Carl's 98 auto AWD project Black Magic
 

Woo! That's some good progress since I seen it last week!

Re: Carl's 98 auto AWD project Black Magic
 

Yeah, my xfer case done blowed apart when I had a welded VC as well. I think it just stresses the hell out of the xfer case on a street car.

Re: Carl's 98 auto AWD project Black Magic
 

BS on that welded diff shit, this is the 3rd car I've had it in and no problems, I must say that I prefer a 4-spider for a street car, but i went welded since it was $300+ diff.

Good to hear its back together, sucks I will be so close up there and won't make it.
I hope its not your last trip to the track.

Re: Carl's 98 auto AWD project Black Magic
 

It will probly be my last trip this year. I dont really wnt to make the trek to cedar. Aaron you can use my trailer if you go to cedar.

Re: Carl's 98 auto AWD project Black Magic
 

^You are coming to cedar as well right?

Re: Carl's 98 auto AWD project Black Magic
 

I'm not going to cedar if I go to BIR this weekend.

Re: Carl's 98 auto AWD project Black Magic
 

I took the car to Rockfalls Yesterday and it went 11.555 @120 mph. I will keep driveing it till the snow falls and then park it.

My plans for winter will be to cut out the rusty core suport and make a tubular one. And get a real intercooler. Ive been getting knock in 3rd durring long pulls so I think my ebay one isnt cutting it. I'll be on the lookout for a precision/garrett or ETS.

Re: Carl's 98 auto AWD project Black Magic
 

I'm loving that 120mph trap speed.

The car will do a 1.5x 60ft, so there is a little bit of room left.

Oh, was the baby seat in for this run?

Re: Carl's 98 auto AWD project Black Magic
 

The car seat isnt heavy enuf to makle it worth removing. I should have pulled the back and passanger seat then it might have ran 11.49

Re: Carl's 98 auto AWD project Black Magic
 

I officialy Parked The car the day after Thanksgiving since the roads were salted.

Today I had a few hours to do work on the car so I removed the rusty lower core support. So I can replace it with a tubular one. I removed the bumper cover, FMIC radiator, and head lights. Then I drilled out about 20 spot welds that hold the lower support on. after some pounding with my BFH and a chisle it came right off.

Re: Carl's 98 auto AWD project Black Magic
 

Damn, Cut the whole front end!

SO weight reduction is gonna be your special upgrade!!!

GOod luck

Re: Carl's 98 auto AWD project Black Magic
 

Part of me really wants to cut it off in front of the strut towers, but I dont really want to mess with the headlight mounting, hood latch, ect.

I think a tubular one might actually weigh more unless I go with lighter tubeing. But it will be worth it to have it solid again plus I plan on making mounts for the FMIC and mabey some tow-hooks.

Re: Carl's 98 auto AWD project Black Magic
 

I tacked up the tubular core suport today. I made the lower radiator mounts from some lifting hooks we take off of engines at work and made some mounts for the a/c condensor. I am going to bring it to my Dads to weld it up with his MIG and drill the holes that will mount the North/South crossmember that runs under the motor/trans. Im not sure what I am going to do for FMIC mounts since I plan on upgradeing my Intercooler before spring.
http://www.facebook.com/photo.php?fb...ount=16&ref=nf

Re: Carl's 98 auto AWD project Black Magic
 

Picture 6 explains to me why you tackled this project!