Re: My Talon
 

Got the Holiday Price on my new FP Race Manifold (Coated) for $265 to the door! If you don't have one, get them before they run out lol.

Re: My Talon
 

Looking good.

Re: My Talon
 

I forsee this car exploding this year.



i wuv you.

Re: My Talon
 

Do you work at a service station in St. Anthony? I have seen a 1G that looks like yours over there a few times.

Re: My Talon
 

He works at st anthony mobile.

Re: My Talon
 

Sweet Dude, glad to see someone building up rather then tearing apart.

Re: My Talon
 

I won't be surprised. Just an excuse to build a mild 2.4L.

Re: My Talon
 

In my bedroom, brand new in boxes:
Holest HX40 with .55 A/R BEP SS bolt-on housing
FP Race Manifold - coated
BC 272s
FIC Bluemax 1650cc
Tial 38mm MS-V wastegate .9 BAR (the brand new v-band one)

:) ECMlink is next muahahaha.

Re: My Talon
 

Ballin!

Re: My Talon
 

Nice

Re: My Talon
 

Once it warms up, I'll be modding my dumped o2 for the tial vband and vband for my downpipe to o2. Once that's done, my manifold, hot side, and o2 will be coated, most likely a silver ceramic coating. I may or may not relocate the alternator with a GM one, and/or add an external oil cooler.

Re: My Talon
 

Get some pics of your pile of parts!

Re: My Talon
 

kevin did u get ur turbo already?

Re: My Talon
 

Sounds like you have a pretty bad ass parts pile! Good luck getting it all together and ready for summer.

Re: My Talon
 

Here is my stuff!

Now I need a 4" intake lol.

Re: My Talon
 

I like!! and I want your manifold!!!

Re: My Talon
 

You going to have this all running by the begining of May?

Re: My Talon
 

why? whats may?

I'm gonna have it all done as soon as it averages over 30-35 degrees. Doesn't mean I'll be driving it anytime, depends when the roads are clean too!

Re: My Talon
 

Sell me your 14b and your 1g exh manni

Re: My Talon
 

I'll think about it. It's actually a ported 2g manifold lol ;) I was gonna use that 14b for the civic!

Re: My Talon
 

What did you do with that 14b I sold to you forever ago.

Re: My Talon
 

I'm getting about $750 back from taxes this year, that will pretty much pay for ECMLink v3!

I have looked at getting an ultra lightweight/portable netbook just for Link only!

I will be doing some maintenance stuff as well, I'll order some new NGK wires, plugs, Mitsu thermostat, front wheel bearings and seals, lower ball joints and outer tie rod ends. Then I will be sending the car to "Jeff the Alignment Guy!"

Re: My Talon
 

Ugh i did front ball joints over summer in the garage. NOT FUN. Get out the BFH!

Re: My Talon
 

I have fun tools that make life easier :)

Re: My Talon
 

Ball joints are not that bad on 1G's.

Re: My Talon
 

Kevin, i got some NGK plug wires practically brand fricken new..only issue is they are blue.

-A. Swift

Re: My Talon
 

Aren't all NGK wires blue? haha. I'm getting them from Worldpac for $30 brand new.

Re: My Talon
 

i'll sell you mine for 25..come get em.

-A. Swift

Re: My Talon
 

I missed my car so I visited it in storage. Here are some better pics of the painted engine bay.

Re: My Talon
 

I'm just gonna come out an say it.....I love your engine bay...haha. I just picked up a burgandy 92, its a long way away from yours, but someday.....

Re: My Talon
 

arg. now i wanna paint mine..fucker.

-A. Swift

Re: My Talon
 

Clean. It looks weird the engine bay being black, i want to see it in person.

Looks really clean though.

Re: My Talon
 

Took off the turbo and manifold, radiator, waterpipe, and thermostat housing this afternoon. I found one of my coolant lines to my oil cooler was leaking, and the long hardpipe gets in the way of my Holset, so I'm just gonna get a 90 OFH and do an external setup. Also getting a used 90 N/T thermohousing and waterpipe.

I noticed the Ebay o2 housing I have is really tiny compated to my turbo outlet, I'm gonna have to hog the shit out of it or get a new one.

Re: My Talon
 

Almost all of them are. I had to widen mine aswell. It still isn't really wide enough but at least the lip isn't as bad and is radiused. But now I have an o2 housing given to me from another guys build that has a larger diameter outlet that i'm going to modify. If I knew where to get that flange outright, I'd give you the info.

Re: My Talon
 

THANKYOU

Re: My Talon
 

Return should be here soon, I'm going to get DSMlink V3 and a FIC fuel rail to match my injectors, because im a ricer and fuel rail will do nothing for me. lol.

Re: My Talon
 

yes you are

Re: My Talon
 

RICE!!!

-A. Swift

Re: My Talon
 

I ordered my OFH feed line, an FP inline filter/restrictor for journal bearing turbos, a bunch of parts from Mitsu (thermostat, rad. cap, 90 OFH, etc), and a ebay SS 3" bolt on v-band o2 housing with external gate recirc'd. I just got my tax return so Link version 3 here we go!

I also shopped around for my dedicated tuning computer, decided on a MSI Wind Netbook! Will be getting it from Microcenter as soon as they get them in stock again next week.

Re: My Talon
 

Shit, got any job openings, I got a dsm that I need to fund to put together.

Sounds like you will be ready for the season