MitsuStyle
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)
-   -   Over Boosting? Need some help guys (http://www.mitsustyle.com/forums/showthread.php?t=35026)

asshanson 04-10-2015 12:12 PM
Re: Over Boosting? Need some help guys
 
Quote:
Originally Posted by talonsway (Post 454513)
Imma run a 10cm t3 turbine hosing on my 16g. Then get a nice t3 manifold, with a provision for a external wastegate. Then get a flange for the o2 housing and weld an elbow on it and maybe do a v-band down pipe i have always wanted.
http://cdn.meme.am/instances/500x/59248559.jpg

Seriously, why not just port the wastegate hole?

A//// Guy 04-10-2015 12:17 PM
Re: Over Boosting? Need some help guys
 
lolz! So complicated.

goodhart 04-10-2015 01:13 PM
Re: Over Boosting? Need some help guys
 
Have fun with a 16g that lags like a 62mm with that housing.

jeremy1375 04-10-2015 08:47 PM
Re: Over Boosting? Need some help guys
 
Troubleshooting guide:

1) Your waste gate is welded shut or stuck closed. The lever on the flapper may be slipping on the pin or whoever welded it used a different piece of metal and let flapper swing freely.

If 1 is not the case goto 2.

2) You didn't really disconnect the flapper. Disconnect it.

If 2 is not the case go back to 1.

1990GSX 04-10-2015 09:59 PM
Re: Over Boosting? Need some help guys
 
Quote:
Originally Posted by jeremy1375 (Post 454591)
Troubleshooting guide:

1) Your waste gate is welded shut or stuck closed. The lever on the flapper may be slipping on the pin or whoever welded it used a different piece of metal and let flapper swing freely.

If 1 is not the case goto 2.

2) You didn't really disconnect the flapper. Disconnect it.

If 2 is not the case go back to 1.
I concur... I really don't think you had it open. The gate is designed for the turbo. There's a difference between it creeping up to 30 and just spooling strait to 30. Sure you may have the one oddball wastegate thats wayyyyyy too small but I doubt it.

TkrPerformance 04-10-2015 10:07 PM
Re: Over Boosting? Need some help guys
 
may be take some pictures of your set up and post them up.

Halon 04-10-2015 10:15 PM
Re: Over Boosting? Need some help guys
 
"I see a T3 / TDO5 turbo Dominic..."


All times are GMT -5. The time now is 01:00 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.