MitsuStyle - Which cams?

Page 3 of 3

Show 40 post(s) from this thread on one page

MitsuStyle (http://www.mitsustyle.com/forums/index.php)

- Turbo / Engine / Drivetrain (http://www.mitsustyle.com/forums/forumdisplay.php?f=91)

- - Which cams? (http://www.mitsustyle.com/forums/showthread.php?t=17373)

Super Bleeder!!

11-05-2007 07:45 PM

Re: Which cams?

Quote:

Originally Posted by slowboy (Post 215619)

It's too bad you need to upgrade to dual valve springs to use the FP3 cams, because that's what I'd want to use, but that extra $350 is a little spendy on top of buying the cams too.

Only the "x" grinds of the fp3 cam.

1ViciousGSX

11-06-2007 11:32 AM

Re: Which cams?

Quote:

Originally Posted by Super Bleeder!! (Post 215660)

Only the "x" grinds of the fp3 cam.

FP3 and FP3x cams require dual springs. :nod:

blageo23

11-06-2007 11:56 AM

Re: Which cams?

The FP2X, FP3, FP3X, and FP4 require the dual springs. But Think Im set of the FP3x cams and the FP dual valve springs.

Super Bleeder!!

11-06-2007 12:59 PM

Re: Which cams?

oops, there i go being wrong again.

tpunx99GSX

11-09-2007 12:09 PM

Re: Which cams?

FINALLY!!!! After my cams were shipped out on october 17th, they finally are in Los Angeles!!!!! I just checked the status randomly on the website and its finally showing that they are in california. I thought they were lost forever. So they should be here today!

Super Bleeder!!

11-09-2007 05:02 PM

Re: Which cams?

Quote:

Originally Posted by tpunx99GSX (Post 216279)

This thread is about tech, not LOOK AT ME posts ya whore!

tpunx99GSX

11-09-2007 08:13 PM

Re: Which cams?

Quote:

Originally Posted by Super Bleeder!! (Post 216342)

This thread is about tech, not LOOK AT ME posts ya whore!

your a dipshit now stfu.

So they got here.
Here are the specs of them:
Intake:
Gross Valve Lift: .411
Cam Lobe Lift: .239
Adv. Dur @.050 3 btd 29 abd
102.0 centerline
Duration @ .050 212

Exhaust:
Gross Valve Lift: .395
Cam Lobe Lift: .232
Adv. Dur @.050 46 bbd 14- atd
120.0 centerline
Duration @ .050 212

Someone wanna explain what all these values mean?

JET	11-09-2007 11:48 PM

Re: Which cams?

Gross lift is after you take the rockers into effect, cam lift is just the cam. Duration is how long the cam stays open. A very important factor that is rarely included is the ramp angle, that is the biggest factor in if you need stiffer valve springs.

tpunx99GSX

11-09-2007 11:52 PM

Re: Which cams?

Overall do those cams look like a decent upgrade from stock?

Super Bleeder!!

11-10-2007 12:31 AM

Re: Which cams?

Quote:

Originally Posted by tpunx99GSX (Post 216368)

your a dipshit

You're. Thanks for playing. :)

JET	11-10-2007 12:48 AM

Re: Which cams?

Quote:

Originally Posted by tpunx99GSX (Post 216383)

Overall do those cams look like a decent upgrade from stock?

The spec's say they are. Pretty much anything is better than stock.

niterydr

11-10-2007 11:50 AM

Re: Which cams?

Quote:

Originally Posted by tpunx99GSX (Post 216368)

So you bought cam's without knowing if they would be a "good" upgrade, or knowing about specs?

I have Ocean Front property in North Dakota for sale, pm me if you are interested.

tpunx99GSX

11-10-2007 01:00 PM

Re: Which cams?

I knew they were an upgrade but i just wasnt sure How good of an upgrade it was. I actually feel a lot more power up top.

x-pride

11-11-2007 09:10 PM

Re: Which cams?

Quote:

Originally Posted by niterydr (Post 216421)

I have Ocean Front property in North Dakota for sale, pm me if you are interested.

I have even a better Ocean Front Porperty in West Dakota!:nod: Good one Josh!!!

All times are GMT -5. The time now is 12:38 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page