MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Brakes / Body / Suspension (http://www.mitsustyle.com/forums/forumdisplay.php?f=92)
-   -   Harmonic Tensioner Pulley BROKE OFF! (http://www.mitsustyle.com/forums/showthread.php?t=17805)

Kracka 12-05-2007 05:51 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Quote:

Originally Posted by FattyBoomBatty (Post 219724)
I guess I didn't think of this before, but it was probably taken off sometime and the bolts were over tightened. was it you that bought this from some kid/guy in iowa?

Scheides' car was a virgin when he bought it. You're thinking of Matt's car.

Kevin 1G Drummer 12-05-2007 06:20 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
E-brake drifts will make those lights come on every time.

scheides 12-05-2007 06:27 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Yup, as far as I know those bolts were never touched.....it is due for a timing belt job in another 14k miles or so, but other than that my car was 100% unmodded when I bought it. Then I corrupted it :D

scheides 12-08-2007 09:33 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Damn it, the bolts are seized in there....off comings the timing cover and belt....and another few days for another part :(

TkrPerformance 12-08-2007 10:07 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
shitty

niterydr 12-08-2007 11:40 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Chris, my cousin works at that Sinclair, I saw your car sleeping there last night.

blageo23 12-08-2007 12:25 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
That sucks man! You might as well pull the engine and toss in a freshly built 2.3l!

Kracka 12-08-2007 01:45 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Quote:

Originally Posted by niterydr (Post 220065)
Chris, my cousin works at that Sinclair, I saw your car sleeping there last night.

Any thoughts on his mechanical abilities?

niterydr 12-08-2007 03:06 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Quote:

Originally Posted by Kracka (Post 220081)
Any thoughts on his mechanical abilities?

They have a L1 ase cert mechanic there that should beable to do a timing belt correctly.

My cousin is just the gas station attendant/pump bitch. Fills air, fills oil, stuff like that (he is 18).

scheides 12-12-2007 08:43 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Got the car back last night. Dave at Golden Valley Sinclair worked on my car, I talked to him for quite a bit through the week and for about an hour last night when I picked up the car. I feel very confident in his abilities as a mechanic--it's not a Ferrari or anything (though it may be as fast as one?)! He pulled off the timing cover, pushed in the tensioner with the proper tool, and then yanked the pulley off and replaced it with a brand new one. Reset the timing and the reassembled. Not a full timing belt job but half way there at least. In the end I probably could have done it myself, but if anyone knows what happened at work the day before this happened, you would not want to deal with it either!

Here's some pics of the pulley, if you look closely you will see how the sheared off bolts got tweaked and goobered up the outside edge of a lot of the holes. The guide pin is gone as well, obviously left violently.

http://www.scheides.com/albums/evoti...4341.sized.jpg

http://www.scheides.com/albums/evoti...4342.sized.jpg

http://www.scheides.com/albums/evoti...4346.sized.jpg

more pics here: http://www.scheides.com/gallery/evotimingpulley

I'll be doing a compression check and tossing it on the dyno here soon, I'm sure everything is dandy, the car runs like a top!

Super Bleeder!! 12-12-2007 09:01 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Now i too have Janine's phone number! BWAHAHAHHAHHAHHAA

JET 12-12-2007 10:49 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Wow, that pulley hung on for quite a while after the balancer bailed. That is quite a bit of damage to the bolt holes. Hopefully the main bearings are ok with all that imbalance that was going on. If not, stroker time!

scheides 12-12-2007 10:59 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Yup, I think everything is fine. I'll do an oil change and compression test for grins, but the car runs awesome. And JET yes you are right!

X Factor 12-12-2007 06:25 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Glad everything is back in order!

scheides 12-28-2007 11:45 AM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Changed the oil the other night and my oil filter has a few good dings in it:

http://www.scheides.com/albums/evoti...0052.sized.jpg

http://www.scheides.com/albums/evoti...0053.sized.jpg

I sent some oil off to blackstone just to see what they say about it, but I am sort of considering myself lucky for now, the car drives just dandy....put about 800 miles on it since getting it back together and no problems yet.

polishmafia 12-28-2007 12:15 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
damn! you need to stop snow drifting ;)

those are some pretty severe hits it took. good thing it didnt split open.

Matt D. 12-28-2007 12:18 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Quote:

Originally Posted by scheides (Post 222204)
Changed the oil the other night and my oil filter has a few good dings in it:

And I'm the pussy who wants to put another undertray on. ;)

tim 12-28-2007 12:22 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
Dont these come from the factory with an undertray? I would think even a shitty plastic one would deflect some of this stuff.

Kracka 12-28-2007 12:50 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
They do, but a lot of people remove them since they are a real PITA.

scheides 12-28-2007 01:33 PM

Re: Harmonic Tensioner Pulley BROKE OFF!
 
I WANT an undertray, the stock one would not have blocked this. It does not reach back past the front of the block; the oil filter is completely exposed. I'm looking at this undertray that buschur is selling now, it goes back past the block and all the way to the wheel wells.

http://img.photobucket.com/albums/v2...dertray451.jpg


All times are GMT -5. The time now is 12:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.