MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   GheyrodX - bigger, fatter, gheyer! (http://www.mitsustyle.com/forums/showthread.php?t=26840)

goodhart 08-20-2011 05:52 PM

Re: GheyrodX - bigger, fatter, gheyer!
 
Much excite!

Kracka 08-21-2011 11:00 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
-FP HTA Green with ported turbine housing and 19psi WGA
-Cobb turbo inlet hose for 3" anti-surge covers
-Cobb XLE BPV

Murlo26 08-21-2011 11:02 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Quote:

Originally Posted by Kracka (Post 390352)
-FP HTA Green with ported turbine housing and 19psi WGA
-Cobb turbo inlet hose for 3" anti-surge covers
-Cobb XLE BPV

You ordered these?

Kracka 08-21-2011 11:11 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Si. Cobb had it all in-stock, but has to take the turbine housing back to FP for porting this week, then next week I'm going to take it for ceramic coating. Installation and tune is probably 3-4 weeks out since I'm also waiting on a special coupler for my LICP that's on back-order. Not a big deal, I'd prefer to not be tuned when it's 100F+ anyway. Yesterday morning at 10:30 when PlanoEvo dyno'd the temp in there was already 102.

Murlo26 08-21-2011 11:15 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Awesome, should be a sweet setup! You should've waited for the release of the BB FP turbos but running them on 93 oct you won't be stressing the JB anyway :)

They announced yesterday that next week all the 8/9 turbos are will be BB on their website.

Kracka 08-21-2011 11:20 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
It's not sounding good for the X turbos, that's what I was initially waiting for. FP told Cobb it won't be happening this year. Something to do with the test turbos not working as hoped so they're going back to the drawing board. CBRD won't do BB X turbos either, but will for the 8/9 guys. I tried and tried again :) I've been talking to FP, Cobb, SpecOps, and CBRD about it. But, if by some miracle they do come out within the next few weeks, I'll have them exchange my center-section.

Murlo26 08-21-2011 11:25 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Quote:

Originally Posted by Kracka (Post 390356)
It's not sounding good for the X turbos, that's what I was initially waiting for. FP told Cobb it won't be happening this year. CBRD won't do BB X turbos either, but will for the 8/9 guys.

Hmmm, interesting...stupid X turbos. Maybe I will do a custom mani to fit the 8/9 turbos :)

I think your setup will be solid regardless, can't wait to see the results.

Kracka 08-21-2011 11:26 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
I'm shooting for 400/400 on Cobb's Mustang, we'll see if the car has it in it with the stock cams!

Murlo26 08-21-2011 11:29 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
I don't think you'll have a problem hitting those numbers, good luck!

Kracka 09-17-2011 08:57 PM

Re: GheyrodX - bigger, fatter, gheyer!
 
Just getting ready for the next round of mods...

http://www.mitsustyle.com/photopost/...m/IMAG0251.jpg

A lot of locals have been having spark plug failures with one taking out a piston in the process. It seems like they're all happening in the 30-35k miles window, I just hit 25k miles today so I figure now's a safe time to replace them, especially with the new turbo going on soon. To the non-X guys who notice the price of the plugs, we don't have a whole lot of choices yet (three to be exact). Factory (~$60/set), NGK Laser Iridium (same plugs, different box, a few bucks cheaper), or HKS Racing (~$100/set).

I also changed my transfer case fluid and rear differential fluids (yes, two separate fluids for the rear differential) again today. The old fluids only had 11k miles on them and were done about 6 months ago, but I figured no harm in frequent changes, especially considering how nasty it looked already :)

FP should have my Green done in a few days so then I'll be bringing that in for ceramic coating, installing my DW800 injectors, and putting on the 3" Depo LICP.

Kracka 09-23-2011 09:36 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Ported goodness:

http://www.dsmstyle.com/photopost/data/641/IMAG0261.jpg

http://www.dsmstyle.com/photopost/data/641/IMAG0260.jpg

Now it's off to get coated tomorrow!

Rmondoh 09-23-2011 09:47 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
That look awesome dude! We should probably take my MAP o2/dp and bolt it on just for the hell of it, LOL! :D

TkrPerformance 09-23-2011 09:49 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Very nice.

PlanoEvo 09-23-2011 02:51 PM

Re: GheyrodX - bigger, fatter, gheyer!
 
Looks real good!

Kracka 10-03-2011 05:55 PM

Re: GheyrodX - bigger, fatter, gheyer!
 
Added ceramic coating to the above ported turbine housing:

http://www.dsmstyle.com/photopost/data/641/IMAG0273.jpg

Kracka 10-03-2011 06:00 PM

Re: GheyrodX - bigger, fatter, gheyer!
 
Oh yeah, and today I also got that Depo 3" LICP installed. I am actually very impressed with it, perfect fitment even with the stock airbox bracket (my AFE intake heatshield mounts to it)! This is one of only two LICP's with confirmed fitment with the stock airbox bracket in place, and the only one larger than 2.5". PPI's 2.75" may have also fit, but it's not confirmed and they said they've never tested the fitment with anything but their own brand intake.

goodhart 10-03-2011 06:02 PM

Re: GheyrodX - bigger, fatter, gheyer!
 
tits!

PlanoEvo 10-03-2011 07:11 PM

Re: GheyrodX - bigger, fatter, gheyer!
 
SPC greatness FTW!

Kracka 10-07-2011 08:21 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Change in plans, the Green has been sold... :)

scheides 10-07-2011 08:24 AM

Re: GheyrodX - bigger, fatter, gheyer!
 
Ohhh shit.


All times are GMT -5. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.