Re: GsXtUrBo98's 2G project thread
 

Alrighty. Sounds good. I'm Monday and Wednesday I'll be free later in the evening, Thursday I think I'm working on the talon, and them Friday I'll probably be free and Saturday after work. I'll text you tonight or tomorrow and we can figure something out.

Re: GsXtUrBo98's 2G project thread
 

Sounds good man

Re: GsXtUrBo98's 2G project thread
 

The factory fuse for the fuel pump usually needs to be upgraded also when you use a BAP.

Re: GsXtUrBo98's 2G project thread
 

Is this fuse under the dash?

Re: GsXtUrBo98's 2G project thread
 

I replaced both in line fuses and as I thought, they were both good and still no power to the pump.. I would think that the in line fuses would blow before anything else would?

Re: GsXtUrBo98's 2G project thread
 

P.s the terminals accidentally crossed because some moron wasn't paying attention :/

Re: GsXtUrBo98's 2G project thread
 

Ok so my ecu is shit.... I talked to Thomas Dorris from ECMtuning and he sent me a link on what to look for in my ecu and sure as shit! Toast.......

I am in the market for a new EPROM ecu and have a few leads as of right now.

Re: GsXtUrBo98's 2G project thread
 

I also want to thank Shawn (4seasons) and Nick (CornFed2.4) for helping me with diagnosis and information on this. Thanks a lot guys!

Re: GsXtUrBo98's 2G project thread
 

Sucks dude! And no problem glad we at least got it figured out!

Re: GsXtUrBo98's 2G project thread
 

Does suck! Still want to see a few quick red 2gs @ proving grounds.

Re: GsXtUrBo98's 2G project thread
 

I'm trying... haha

Re: GsXtUrBo98's 2G project thread
 

Ok so I picked up a new eprom ecu from 1999gst tonight. Great guy! He pulled it from his running car today and even opened it up for me to look inside.

When I got home I plugged it in just for shits and gigs, not to see if it would start but to see if the fuel pump would turn on. NOTHING!!! FML.. At least I know that its not just the ecu. Next step I think is going to be replacing the stock relay under the radio. Mine is the little black plastic one.

Re: GsXtUrBo98's 2G project thread
 

Shitty

Re: GsXtUrBo98's 2G project thread
 

Is your BAP bad? Try hooking/wiring it without the BAP and see what it does. You can fry a BAP easy if wires were hooked up or crossed wrong.

Re: GsXtUrBo98's 2G project thread
 

I found a fried main fuse. Swapped in a new one and pump works! Now I need to get my new ecu socketed

Re: GsXtUrBo98's 2G project thread
 

Good to here you got it figured out .

Re: GsXtUrBo98's 2G project thread
 

So was your ecu bad for sure then or could your BAP be fried?

Re: GsXtUrBo98's 2G project thread
 

His ecu was fried. When you turn the key on the cel wasn't coming on and The ecu wasn't grounding the stock fuel pump relay. When I supplied a ground for the stock fuel pump relay the pumps would come on.

Re: GsXtUrBo98's 2G project thread
 

Yea thanks shawn. Plus when I opened up the ecu it was blown.

Re: GsXtUrBo98's 2G project thread
 

Ok that is good. I read before that the BAP is easy to fry if you cross wires wrong on them at all.