Re: Chaos! Project phoenix
 

I been trying to get this part for a while. Most may feel it's not needed but I'm big on safety.

frontline fabrication driveahaft loop
http://i307.photobucket.com/albums/n...eshaftloop.jpg

Re: Chaos! Project phoenix
 

http://i307.photobucket.com/albums/n...ddub/talon.png


Just a view of my dash. Stewart Warner oil pressure, boost, fuel pressure, and electronic tach w/shift light. Then there's the AEM wideband.
http://i307.photobucket.com/albums/n...nddub/dash.jpg

Re: Chaos! Project phoenix
 

Just got my RX7 rims back today from being powder coated.

http://www.youtube.com/watch?v=QoY8vNt8dn4
http://i307.photobucket.com/albums/n...IMG_8296-1.jpg

http://i307.photobucket.com/albums/n...b/IMG_2368.jpg

It's something about gloss black that just compliments a panda.

And I been really waiting for this!
If you want a part sometimes waiting isn't an option. You may have to take the initiative to have it made and be the first and sometimes the only one to have it.


Yer sir! 1st 1GA with Angry Aero Bumper Shutters!
http://i307.photobucket.com/albums/n...Untitled-4.jpg

Oh, it ain't over. This is just the beginning!!

Re: Chaos! Project phoenix
 

Re: Chaos! Project phoenix
 

Thanks. I never even considered going to MAP's PG. When is it?

Re: Chaos! Project phoenix
 

PG #1 June 21-23
PG #2 Sept 6-8

Re: Chaos! Project phoenix
 

O_O'' Is this build for real...?!!!! WOW ! Show em how its done ! This build is amazing ! Funny thing is, i laugh when i read through threads like these...specifically with the 4 inch exhaust and the huge down pipes... and Big intercooler piping...not to mention the huge cores and twin waste gate set ups ect ect ect...i sit here in awe just wondering how do they fit all that? When i was having such a hard time fitting a slim fan hmmm :D real nice set up ! (Im jk about the fan)

Re: Chaos! Project phoenix
 

Had some fittment issues with the radiator and also the hoses. But this should do it
http://i307.photobucket.com/albums/n...icradiator.jpg

Its not in the best location but it's better then not having one lol
http://i307.photobucket.com/albums/n.../oilcooler.jpg

This should help a lil in the 1/2 mile event
http://i307.photobucket.com/albums/n...b/IMAG0527.jpg
http://i307.photobucket.com/albums/n...c9087dfac0.jpg




Safety first. 2nd corbeau seat for passenger with 2nd RJS Camlock Quick-Release Harnesses
http://i307.photobucket.com/albums/n...ddub/seats.jpg

off goes 8an
http://i307.photobucket.com/albums/n...b/IMAG0503.jpg

on goes 10an
http://i307.photobucket.com/albums/n...b/IMAG0508.jpg

Re: Chaos! Project phoenix
 

Very nice work sir

Re: Chaos! Project phoenix
 

Thanks evotuner. just waiting for my FIC 2150's and then first motor start should be soon after.

Re: Chaos! Project phoenix
 

Fic 2150's
http://i307.photobucket.com/albums/n...ub/fic2150.jpg

2150's installed with PnP wiring adapters!
http://i307.photobucket.com/albums/n...b/fic2150s.jpg

See'em down there?
http://i307.photobucket.com/albums/n.../fic2150s2.jpg

Soon, very soon!
http://i307.photobucket.com/albums/n...b/newsetup.jpg

Re: Chaos! Project phoenix
 

Nice looking build! What kind of fuel will you be using? And what kind of power goals do you have?

Re: Chaos! Project phoenix
 

Thanks 4seasons69! I'm running E85. Shooting for 850ish-900+whp. give or take.

Re: Chaos! Project phoenix
 

Those should be some good numbers. Looking forward to seeing some results!

Re: Chaos! Project phoenix
 

SHE'S ALIVE LOL!!!!

http://www.youtube.com/watch?v=p4m6J...ature=youtu.be

Re: Chaos! Project phoenix
 

Should be getting tuned soon after Reichen gets back from this weekends mile event. I can't wait!!

Re: Chaos! Project phoenix
 

Big powa!

Re: Chaos! Project phoenix
 

not quite there but its coming along. idle is high at 1300rpm but once its done she going to sound pretty aggressive lol

http://www.youtube.com/watch?client=...yer&nomobile=1

Re: Chaos! Project phoenix
 

Nice build!

Re: Chaos! Project phoenix
 

thanks sleepydsm!

Re: Chaos! Project phoenix
 

Hope I can see this in person come June. Its nice to see a well built 1g. Will this car be at the half mile races?

Re: Chaos! Project phoenix
 

Yes i'll be there. I'm with Devo2ning in the vendor 1/2 mile shootout.

Re: Chaos! Project phoenix
 

Swapped out the 2 blue hoses. Should be getting the car by Sunday for motor break in!!!

http://i307.photobucket.com/albums/n...b/newhoses.jpg

Re: Chaos! Project phoenix
 

A lil 2step setup teaser :wink:. Builds to 10psi and Boost is on wastegate spring (14psi).


https://www.facebook.com/photo.php?v...type=2&theater

When you have time feel free to go thru Devo2nings FB page and if you like what you see please comment and like their page.

Re: Chaos! Project phoenix
 

Re: Chaos! Project phoenix
 

A lil more tuning and she'll be ready for 1/2 mile event.

Re: Chaos! Project phoenix
 

Re: Chaos! Project phoenix
 

Nice car.

Re: Chaos! Project phoenix
 

Car looks good!

Re: Chaos! Project phoenix
 

Wanna race a 600? Haha. Car looks nice. Hopefully I can check it out this weekend

Re: Chaos! Project phoenix
 

Thanks everyone. Its almost that time and I'm so damn pumped lol. I wanted to get it painted but after I thought about it I changed my mind. This isn't exactly the kind of event you want to run with a fresh paint job lol

Re: Chaos! Project phoenix
 

dats hawt

Re: Chaos! Project phoenix
 

Is the car all tuned up and ready to go? Good luck.

Re: Chaos! Project phoenix
 

car was tuned at 29psi on just a couple street pulls for safe afr's. Im happy at results looking at the amount time of tuning. I know it would have hit 160+ on 2nd pass but throttle cable bracket broke and that was it for me..

Re: Chaos! Project phoenix
 

We finally got to the dyno today. Everyone been waiting to see what this lil turbo can do lol. Reichen and the shop were asked what did I think the car was going to put down. They said 500ish. I never told anyone but in my mind I figured 600ish and I stood firm on that lol. It wasn't the best day to hit the rollers since temps in dyno showed 97* but oh well. 1st pull tach didn't give good signal and numbers were off showing 695whp and 900ft/lbs lol. The Afr were at 11.1 but someone at a meet/car show i went to turned up my boost to 33psi (it was at 29psi). the tune was conservative so it didnt hurt the motor but we noticed a little knock so mike pulled 1* of timing. 2nd pull afr leaned out to 11.7, 12* peak timing @ 33psi car made 693whp 527ft/lbs but then oil pump took a shit . We're pretty sure the engine noise logged was from oil pump going bad. With a little more tuning I'm hoping for around 730-750ish at 33psi then we turn boost up to 40-42psi :banana:. For the record this is a dynojet. i'll be back to update once we get back on the rollers.

http://www.youtube.com/watch?v=Z50mO...ature=youtu.be

Re: Chaos! Project phoenix
 

Mother f'ers, glad it didnt blow up your car. Making some awesome numbers though

Re: Chaos! Project phoenix
 

thanks.
Right at the end of pull a little cloud of smoke appeared. Fan blew oil onto downpipe. It may not even be the oil pump. Oil Pressure didn't drop but it was leaking a very tiny trail of oil. I had that issue before when the 10an aluminum fitting to the oil cooler cracked. I just can't find a steel one. But it is one of the two issues and we just didn't want to chance it. It wasn't worth it.

Re: Chaos! Project phoenix
 

Well i was incorrect about the dyno pull. It was to 10,000rpm. The shop found the oil leak and it wasn't the oil pump. The car vibrated the fittings to the oil cooler loose. They modded the fittings with wires so they wont come loose again. I went out and did some pulls immediately after that and a saw a oil leak again. This shit is crazy. The leak was now coming from the oil pressure sending unit. they go to try to tighten in in and it falls off and hits the ground lol. The brass fitting broke in the middle of the threads with the other half was still in the block!!!! that is now fixed. Im getting phantom knock in the logs. I know its not the motor so once I find what is causing it i'll hit the rollers again.

Re: Chaos! Project phoenix
 

Race car problems. :(

Re: Chaos! Project phoenix
 

Yeah lol. the real issue is the car is setup to drive on the street. It actually drives much better then the average dsm. But its so damn loud and vibrates so much it's almost not worth driving on the street. And the way it revs can't help. revs like a damn motorcycle.