Re: 6 cylinders & 2 turbos, for now
 

Come on now you should know better. The burning oil was an excuse to go ALL OUT!

Should I consider it a problem?

No! Anyone know of some 278 or 285 35-18 and some 255-35-18s. Looking for some alright used ones to put on the new rims for now until the car is completely done.
It runs but will be torn down and I am not cutting corners so the build WILL be done right!

Re: 6 cylinders & 2 turbos, for now
 

You said your dsm was going to be a stock rebuild too.

You might not think its a problem, I bet your old lady might, lol.

Re: 6 cylinders & 2 turbos, for now
 

Shhh! It will be fine. I am seling the other 2 cars.

Re: 6 cylinders & 2 turbos, for now
 

^Give me a shout soon, weather should be cooling down.
So whats the plan of action on this thing?
http://sickfunshirts.com/images/2jzl...ack%20copy.jpg

Re: 6 cylinders & 2 turbos, for now
 

^Give me a shout soon, weather should be cooling down.
So whats the plan of action on this thing?
http://sickfunshirts.com/images/2jzl...ack%20copy.jpg

Re: 6 cylinders & 2 turbos, for now
 

Fix it up, and sell it. Make some cash.

Re: 6 cylinders & 2 turbos, for now
 

Not selling it. I dont care to make any $ on this one as it is already getting fun to build and I have not even done much to it yet. Got some sore goodies. Im done buying for a while and I am going to tear apart and clean.
http://www.mitsustyle.com/photopost/...dium/cover.jpg
http://www.mitsustyle.com/photopost/...ium/shocks.jpg
http://www.mitsustyle.com/photopost/...edium/rods.jpg

Re: 6 cylinders & 2 turbos, for now
 

Do you have the pic of the supra that you texted to Aaron and me, with those rims on it?

Re: 6 cylinders & 2 turbos, for now
 

Ill look for it.

Re: 6 cylinders & 2 turbos, for now
 

Well a buddy and I started taking the power plant out of this thing and I tell you this is a bunch of crap literally. This is quite different then the DSM's I am used to. Im going to put all of the useless garbage in a 55 gallon garbage can and see how much shit was not needed and the weight savings of it all too. We worked on it for at least 5-6 hours and I would say have it half to 3/4 out.

I also ordered custom made pistons from CP which are 9.5:1 compression :) too bad it will take a month to get them. The engine is going to WWW.MAPERFORMANCE.COM to be torn down, machined, bored over, looked at, this and that, and re-assembled.

The next steps are to actually get the engine out, bring it to MAP, tear all of the stuff off and out of the car for a full paint job, order cams, valves, springs and retainers, gaskets, turbo, manifold, tuning software of choice, piping for a custom 3" intercooler and 3.5" exhaust setup, tires... ok Im stopping right there because I can already see this thing costing me but it will be worth it. Photos of progress to follow.

Re: 6 cylinders & 2 turbos, for now
 

SHiet.

Sorry I couldn't make it last night, sounds like you made some good progress and that this thing will be rolling first day of spring.

Re: 6 cylinders & 2 turbos, for now
 

HA! Ya right maybe this time next year. Are you going to pay for the built auto, stall, new billet turbo, fuel system......

Re: 6 cylinders & 2 turbos, for now
 

I forgot about those items. :O(

Re: 6 cylinders & 2 turbos, for now
 

Yeah what a pita. I hope once it's out, things will make more sense. That wiring harness, driveshaft, intake plenum, can all go to hell.

Re: 6 cylinders & 2 turbos, for now
 

Yea you laughed at me for not getting the intake off after forever it seemed and how many hours later did I hear that you still had not gotten the drive shaft off? Did you ever get it off?

Re: 6 cylinders & 2 turbos, for now
 

Nope. Gotta get the rear end up in the air so we can spin the shaft just a hair. Couldn't reach that very last bolt holding it to the rear end.

Re: 6 cylinders & 2 turbos, for now
 

Need moar pics foolio

Re: 6 cylinders & 2 turbos, for now
 

We did try to get a couple pics of the last "hoorah"...

Re: 6 cylinders & 2 turbos, for now
 

Well the motor and trans are out! Thanks a million to Brandon for busting ass and a few knuckles on helping me get this hog out of there. Now the fun begins. Here are a few photos.

http://www.mitsustyle.com/photopost/...m/DSC_0307.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0308.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0313.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0315.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0316.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0317.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0318.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0320.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0332.JPG
http://www.mitsustyle.com/photopost/...m/DSC_0333.JPG

Re: 6 cylinders & 2 turbos, for now
 

What a effin mess!!!! You're planning on tucking this thing aren't you?

Re: 6 cylinders & 2 turbos, for now
 

I plan on doing everything to this thing.

Re: 6 cylinders & 2 turbos, for now
 

No problem dude, thanks for the foodz. God that wiring harness was a pyle. Cant wait until the day we're bitching about trying to get that pig back in!!

Re: 6 cylinders & 2 turbos, for now
 

Ha and BTW I looked into deleting the ABS on this and they say its an absolute NO NO! no one ever does it and they say the car is built around having this more advanced verson of ABS then a normal setup like in most cars.

Re: 6 cylinders & 2 turbos, for now
 

Go Toyota and their over-elaborate wiring and electronic systems.

Re: 6 cylinders & 2 turbos, for now
 

Well some updates here. The motor was out and taken apart from the tranny and all of the other goodies off of it so it was a bare long block. I brought it into MAP for it to be hot tanked, machined, and assembled. The first thing that MAPerformance is doing to it is tearing it all apart which I think is already done. Getting it ready for the machining and assembly of the short block is next on the list. Some more decisions as far as parts go and a little more $ and Ill be able to start into the head.

The block will be built with Crower rods. It will also have CP custom ordered 9.5:1 compression pistons, ARP main studs, and all ACL race main and rod bearings as well as thrust washers all supplied by MAPerformance. They are great to deal with when trying to order custom parts like I did with my CP pistons.

I am trying to figure out when my choice of a 6765 journal bearing Precision turbo will spool on my setup so I can figure out the best torque converter for the street and strip where I do not have to use n02 to spool.

Re: 6 cylinders & 2 turbos, for now
 

Sweet man. Nice turbo choice, should make for a pretty mean street/strip setup!

Re: 6 cylinders & 2 turbos, for now
 

Are you kidding? A built 2jz for a teeny tiny 67mm??? Why bother o_0

Re: 6 cylinders & 2 turbos, for now
 

You will see.

A project car is not always about how much power you can make but how much of a power band you have at a good power number. Ask Halon about that one. My eclipse may not have the most power but it has a DAM nice power band which equals Powerband > Total Power

Re: 6 cylinders & 2 turbos, for now
 

Sounds badass!

Re: 6 cylinders & 2 turbos, for now
 

Sounds like deadly setup for the roads here in minnesota! really can't wait to see this car in person man. Power band > Total power indeed!! :D :D

Re: 6 cylinders & 2 turbos, for now
 

Thats great that you want a good powerband, but powerbands dont dictate needing a built motor, for the most part. Just seems like money you could have invested in other parts of the build.

Oh well, just my opinion. Carry on.

Re: 6 cylinders & 2 turbos, for now
 

I like the higher compression choice. Higher compression = more off boost torque. Higher compression also = more power at less boost. Both of those = slightly widened power band.

Does higher compression also induce quicker spool? I've heard both sides, some say yes (reasoning being duh of course), and some say no (reason being the stroke is still the same, and the same volume of air is being moved). Anyone with some real world experience have any feedback on that?

As for whether or not the money could be spent wiser elsewhere, in the end I suppose that depends on the individuals viewpoint, and any exisiting conditions. If you know Kerry, he seems to like to overbuild things. The motor was higher milage and starting to burn some oil, so it was coming out anyway. So building it now was more a convenience factor as well.

To each their own I say :)

Re: 6 cylinders & 2 turbos, for now
 

67mm powerband...drool....

Re: 6 cylinders & 2 turbos, for now
 

^Busch nuts and I think STM did testing with a 10:1 motor vs stock in teh evos and i think a 8.5:1 and 10.1:1 motor and there was no difference in spool but the off boost power was there, I believe mullen of mullen tuning reported the same thing since he just got a 10.1:1 motor.

Either way, i love the off boost torque of higher comp. motors esp. in DSMs.
I think Joe's opinion is that well a 2JZ could easily handle the power of a 6765 on the stock bottom end, why I'm sure he has seen it first hand, a local "supra shaun" made 750+ i believe at DB and his motor is basically cams and headstuds I think, i think he made 825 on a setup as well, not sure if that is old or new.

I know I got to see a ton of stock bottom end supras in TX running around with 67mm setups or bigger on stock bottom ends all day.
But if you got the $$$ and you want to, why not? I'm sure you will more confident about it once its built.

Good luck, I can't wait to see this done, let me know if you want a hand with reassembly.

Re: 6 cylinders & 2 turbos, for now
 

Yeah that makes the most sense to me. Higher compression would not increase spool, in the end you are still pushing that same amount of air.

But it would move the power band a little bit left due to the added off-boost torque and the fact that you will make more power at less boost.

I wonder what those new billet 67's are capable of supporting power-wise. I'd guess maybe 900 if you maxed the sucker out maybe??

Re: 6 cylinders & 2 turbos, for now
 

Were you driving around maple grove the other day? I think i saw you.

Re: 6 cylinders & 2 turbos, for now
 

^^ LOL, It's been sitting with no engine for over a month now Tom.

Re: 6 cylinders & 2 turbos, for now
 

If I were to guess, I bet shane could answer that with an accurate answer, but I think they are the best turbo for the street on a supra, you won't get beat by too much if any.

If i had to guess, I'd say close 850 for sure. The kid i met in SA, made 700 on his and he was at about 27-28ish psi

Re: 6 cylinders & 2 turbos, for now
 

Yea, compression does not increase spoolup. It can make more power at say 5psi or boost during spoolup though, to kinda make it seem like it's spooling fast, if you don't have boost on the dyno chart. E85 makes turbos spool faster. With an auto though, powerband is different, if you set up the torque converter correctly it will avoid lag from a roll and instantly go right to where your turbo spools anyways. You be driving down the road at 3000 RPMs normally, then floor it and and it will instantly flash to 5000 or whatever RPMs and the turbo is spooled. And then it stays spooled through the gears. It also goes through the RPMs differently than a manual. A dyno chart for an auto car with a properly setup convertor with RPM on the bottom might look like it has no powerband, but then when you look at it vs MPH you realize that it just spends a long time barely moving through the RPMs, but it is going through a big mph range. The billet 67 is a great turbo though on anything from Hondas to Mustangs.

I hope it will be running on E85 with that compression. The 2JZ are fairly knock prone with their 8.5:1 compression on pump gas.

Re: 6 cylinders & 2 turbos, for now
 

It will definitely be on e85 and I guess it will be in Shanes hands to see what this thing will make for power. Shane have you tuned with proefi before? Looks to be the kick ass tuning setup for these things.

Yes I built the motor because it was higher miles, smoked a bit, and it had oil leaking issues. I am not going to skip on anything on this car and don't have to worry about saving money here to spend there because it is a project that will be at least a year or more until it's done so I have time.