Re: Project Black Talon
 

Well its obviously hard to tell if the bushing was at fault on the connecting rod or if it was the wrist pin that was machined wrong. Regardless the clearances are supposed to be .0007 to .0009 which is less than 1 thousandth. I will be making sure it is in spec next time since it was obviously not checked by the manufacturer.

Ive also read/heard Jake Montgomery had an interesting time with some HD Wiseco's.

Re: Project Black Talon
 

So I asked what the pistons/pins are rated for, I got replied

650 flywheel FP for the standards and we see 1100+ HP on the HD's