Re: Spring Dyno Day Results and Pics!
 

summer would be fine, you all must drive your car in the summer anyway.

Re: Spring Dyno Day Results and Pics!
 

I think a summer meet would be kickass, because that way my car is more likey to be running... lol

Re: Spring Dyno Day Results and Pics!
 

Does anyone know the guy that had the blowout? I've seriously been looking for that DC sweatshirt for like 5 months now!

Anyway looks like it was a great time, I thought Hughes was gonna make way more power than he did, do you know exactly what went wrong? I'm happy with my WHP now, looks like my Evo is pulling some good numbers considering the mods!

Re: Spring Dyno Day Results and Pics!
 

He works at MAP.

I SHOULD be making way more power but I am over-running my stock fuel injectors so the car is going way rich (its just dumping fuel in) and then going really lean in the higher RPM's. Add that to my eratic boost control b/c of the GM BCS and its just a big mess. It'll all be fixed and ready to rock within a few weeks though and I'll be back on the dyno!

Re: Spring Dyno Day Results and Pics!
 

Wish I could've made it, but my cars still down.

Looked like a hell of a time! Wish I would have been there and ran though, my estimated numbers make me feel like I would fit in. lol everyones in or below 350whp range.

Re: Spring Dyno Day Results and Pics!
 

Looks like a good time! Too bad I could make it.

Re: Spring Dyno Day Results and Pics!
 

Had a blast and made 20 more WHP than I guessed!

Thanks to all who sponsored.

Re: Spring Dyno Day Results and Pics!
 

Looks like it was a blast!.. Sorry I couldn't make it

Re: Spring Dyno Day Results and Pics!
 

Thanks to everyone for coming out.
The SRT-4 would have easily had the top number, if the tire hadn't blown out.

Re: Spring Dyno Day Results and Pics!
 

Hey Kracka, do they make a better BCS than the gm? I am using the gm BCS and I also hate it. :score003:

Re: Spring Dyno Day Results and Pics!
 

Was that with the old fiddy?

Re: Spring Dyno Day Results and Pics!
 

The GM BCS is ok on it's own, there are better ones, but the main problem with any BCS on an Evo is going to be the poor manner in which the ECU does boost control.

Re: Spring Dyno Day Results and Pics!
 

It works pretty good for me with the JDM MAP sensor and the direct psi boost control mod. The load based boost control kinda sucks though

Re: Spring Dyno Day Results and Pics!
 

yeah i have the gm bcs controlled by load, and i am anxious to get the map sensor

Re: Spring Dyno Day Results and Pics!
 

Thats the only way i would really attempt it.

Thanks Mitsustyle and DBPerformance for putting together another fun dyno day! 28 cars is rediculous!

Re: Spring Dyno Day Results and Pics!
 

I am going to try pressure-based boost control with the Evo X MAP sensor; if I'm not happy with that then the GM BCS will go into the garbage can.

Re: Spring Dyno Day Results and Pics!
 

Interesting how a neon almost made most HP at a mitsu dyno day. haha :P

Re: Spring Dyno Day Results and Pics!
 

AWD can be a killer on HP numbers.

Re: Spring Dyno Day Results and Pics!
 

Im not really interested in that :news: :)

Re: Spring Dyno Day Results and Pics!
 

I still consider an SRT-4 a DSM, it's not really but they're close cousins in a weird way! I'll be interested to see how your GM BCS works with the Evo X MAP Sensor, sounds like a great upgrade if it works the way it's supposed to!

$MD out.

Re: Spring Dyno Day Results and Pics!
 

Nope, that was on 14b POWA!

The 50 is going on soon though.

Re: Spring Dyno Day Results and Pics!
 

little late on pitching in but this was a great time.. i even dyno'd the stock evo to get a good base line number

Re: Spring Dyno Day Results and Pics!
 

Sucks I had to leave early. My 1:30 appointment didn't show up anyways. After fixing some bugs this weekend, I should be ready to dyno again with all the changes.

Re: Spring Dyno Day Results and Pics!
 

food was awesome chris. although i didnt get the 220 i wanted, i'll get over that next time we do a dyno day. there were a bunch of evos there too. can i have a ride in someones Evo next time??!!

Re: Spring Dyno Day Results and Pics!
 

Just ask one of us. I don't think most of us would care to give a ride, unless Evo rides start turning into a carnival event or something...then it might just get annoying...

BTW..Jake I owe you a ride still.

Re: Spring Dyno Day Results and Pics!
 

Yea the SRT-4 almost made top HP numbers at 4.5k lol. Turbo had just hit full boost, sounded mean.

Re: Spring Dyno Day Results and Pics!
 

Where did everyone parked. I stop by but there was not parking space so I left.

Re: Spring Dyno Day Results and Pics!
 

We would of found you a spot... Can't believe you came and then left!

Re: Spring Dyno Day Results and Pics!
 

Yeh I know. I was depressed after I left. I can't wait for the fall one.

Re: Spring Dyno Day Results and Pics!
 

Ohh i know, I'll hold ya to it! :D

You made good numbers too, 233 stock isn't to shabby at all. let the modfest begin!

Re: Spring Dyno Day Results and Pics!
 

There's plenty of evos around! Just ask, and you shall receive! :D

You have GOT to be KIDDING ME! There was parking across the street, or eve on the street for crying out loud! I can't believe we filled the damn parking lot though, freaking awesome!

Re: Spring Dyno Day Results and Pics!
 

Yeah the amount of people that showed up was crazy, a ton more then i thaught would be there.

Re: Spring Dyno Day Results and Pics!
 

They only rev to 6200 rpm, what did it make at 4500rpm? Sorry we could not stay longer, had to finish moving stuff.

~John

Re: Spring Dyno Day Results and Pics!
 

What size was that? 225/45/18 18*7.5 ???

Re: Spring Dyno Day Results and Pics!
 

Maybe two or three years ago, I had a big thread about my 20G car having fuel cut... No one believed me... I even got banned because of it! Well, my mostly stock 1G hits fuel cut at 15psi (I found that out at the dyno day!) Thats the exact same thing it was doing three years ago, so if I could go back in time, I'd give you all a big middle finger!

Re: Spring Dyno Day Results and Pics!
 

I was really impressed by that ricey looking white 2G that made like 339 awhp on a 16G, sidemount IC, using an SAFC2. It really is all about making what u have work together as best they can.

Re: Spring Dyno Day Results and Pics!
 

331 hp

I was talking to that guy, he might of had link not sure, he said he post on the DSMlink boards and that he tuned everything him self. Also he has a built bottom end with higher compression pistons. However, if you were to look under his hood you would swear it's basically stock.

That guy needs to go race people for $100 a race and become a rich man very quickly lol. He even admitted his engine bay looks worse than stock. :)

Re: Spring Dyno Day Results and Pics!
 

Fiberglass fenders and aftermarket rims is ricey? When I first got my car I hated the rims but now I think they fit the car well. When I bought the car it had a stupid bodykit on it; I wouldn't even want to be seen driving something with that crap on it.

I actually don't use the SAFC2 anymore as anything more than a display - settings are zeroed. I tune with TunerProRT.

I don't think a FMIC is really necessary. I don't know if the SMIC I have flows well or not, but I'm planning keeping it for a while yet (probably as long as I have the car).

I had hoped for higher numbers but at a lot higher boost; I guess I should've cranked my boost up on the drive there instead of on the dyno between runs.

Re: Spring Dyno Day Results and Pics!
 

Actually I said "I wish I had higher compression pistons". It has lower than stock - 8.0:1. Thats how I bought it.

I have a galant valvecover that says mitsubishi on it which I was thinking of having powdercoated red, but then people would think more of my car so I don't think I'm going to.

I do wish I at least had some aftermarket cams and 10:1 pistons, then it would have more power but still look the same.

My dad has a mustang that dynoed at 524 torque / 469 HP on an engine dyno, and he is scared to race me -- he pulled me a little bit when I was running gas and just the SAFC2 tune.

Re: Spring Dyno Day Results and Pics!
 

To be fair didnt i read that you dyno'd in fwd and not awd?