Re: Perkul8r's 91 Galant VR4 1055/2000
 

Yea, that's one thing to keep in mind with a trunk relocation, if you plan to bring it to a drag strip that actually cares about tech you'll need a vented box and cut-off switch. Jeg's sell's kits, but I'm sure a guy could piece together a kit by himself that costs half as much as they want.

And if you go with a small battery, try checking out what Batteries Plus has, my buddy got a PC680 equivalent for way cheaper than the Odyssey's cost. His name is 95tsi on here if you wanted to ask him what exactly he has.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

I seen those post over there. And its way easy to get the wire back there anyway. And I would probably do a battery box anyway to be on the safe side. Only cause I know I will be taking stuff in the trunk. I think that may be the route i go. Now Just gotta get supplies.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Picked up a couple little things for the car. Got a 1g shifter coming, Boost gauge, Solid shifter bushings- the factory ones are shot, may be part of my shifting problem. Gonna drive the car back home this weekend. And a buddy is gonna let me use his garage to switch the clutch.

Gonna try and get the interior cleaned up a little while i am at the in-laws this weekend. Still looking for a couple little parts for the car. In need of the drivers side a pillar trim and the other trim piece that connects to that one. And also the fuel door latch. Hopefully will find them soon.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

well, I did get a few things sorted out on the Galant this weekend. I didn't plan on changing the clutch out at my father in laws, but he later said I could. But before than i got some little stuff done.

I fixed the stupid gas door latch. Snagged one off and eclipse and it was the same. I than did an emissions and egr removal. Almost all of the vacuum lines were cracked. I than redid what little vacuum lines i had to with new stuff. Added a Hallman MBC that i had bought for the talon. And also added an AEM boost gauge and Wideband i had bought for the talon.

I was going to use an a pillar mount for the gauges, but the gauge pod i had looked horrid when I did the test fitting. So i did a quick throw together and mounted the gauges under the radio. Still dont look bad for a piece of plastic.
http://i665.photobucket.com/albums/v...4/IMAG0077.jpg

I than started getting the car apart after my father in law said i could keep it in his garage. I did what I could get from the top as I did not bring my jack or jack stands with me.
http://i665.photobucket.com/albums/v...4/IMAG0079.jpg

Hopefully next weekend I will have the trans out. Different clutch in. And maybe drive it home.

We'll see.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

You should power wash that thing it's filthy

Re: Perkul8r's 91 Galant VR4 1055/2000
 

I was planning on washing it before i started working on it. But where the car is located there is no places open right now. So it will be done as soon as i get it back on the road. Its pretty dirty in there. But what do you expect for a car that has lived a life on a gravel road.

I also gotta take a look at a couple oil leaks. Kinda looks like VC gasket is leaking, and oil feed from cylinder head is leaking too. Also gonna pull the heat shield off of the manifold. The top of the turbo looks nasty.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

So, finally was able to get some work done on the car this weekend. Took a little bit, but got the trans out. And ya, the clutch was gone.

http://i665.photobucket.com/albums/v...4/IMAG0090.jpg
http://i665.photobucket.com/albums/v...IMAG0091-1.jpg
http://i665.photobucket.com/albums/v...4/IMAG0092.jpg
http://i665.photobucket.com/albums/v...4/IMAG0093.jpg

Glad I got new stuff to go in.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

So had a buddy offer me a 16G turbo to put on the galant. Only one problem. The turbo came with a whole car. lol

The car itself has a nasty knock, pretty sure its a rod. BUt haven't dug into yet. Its a 94 talon DL that someone put a 4G63t into it. Its pretty hacked together in the engine bay, but the interior is really nice. Not quite sure what i am gonna do with it yet though.
http://i665.photobucket.com/albums/v...f/IMAG0097.jpg
http://i665.photobucket.com/albums/v...f/IMAG0098.jpg

I took the pics after we towed it back to my friends house so I can use the garage. This car would need alot of work for it to be a good reliable car. Wiring needs to be redone, motor fixed, and other misc things. Might just use it as a tinker toy.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Well, finally starting to get things done. Got the trans in and started getting all the stuff underneath put together, Gotta go get some trans/transfer case oil tomorrow. And probably a new battery. Hopefully will have it all back together tomorrow.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Well, got the car together tonight, but still having one problem. I have bled the clutch twice and it still wont let me shift if the car is running. I am hoping I am just overlooking something.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Have you adjusted the pedal at all?

Re: Perkul8r's 91 Galant VR4 1055/2000
 

No, Not yet, I was gonna look at that today. I gotta pull the rad to change out some things so I am also gonna bleed the slave cylinder again. Its kinda cramped in there with everything put back together.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Yes, The trans is in. BUt still first gear sucks. and clutch engagement is dam near right off the floor. I did try adjusting the clutch pedal, but it was already turned almost all the way out. So that didn't help as much.

But on the bright side. I finally get to take it home. Now just gotta stick to earning money for a rebuild.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

your probably just not use to it quite yet and it will break in some too

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Ya, the clutch is alot different than what I am used to. But it is a used clutch so hopefully it will be just fine.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

You mentioned you fixed your gas door with one from an eclipse? Did you replace the whole door or what? My gvr4 gas door has a spot that looks like a lock assembly belongs there and just flops around. :(

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Mine needed the plastic thing that attaches to the body. I'll take a pic of it shortly. But yes, I just grabbed one out of an eclipse and it worked perfectly.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

The part i replaced was the plastic piece in the pic. I actually think I got it from a Laser, but they are the same.

http://i665.photobucket.com/albums/v...f/IMAG0187.jpg

I just made sure to re lube it that way it wouldn't break again. lol

Re: Perkul8r's 91 Galant VR4 1055/2000
 

huh, the piece I'm missing is actually the latch on the gas door itself. I'll pm you a pic or something and figure it out.

Re: Perkul8r's 91 Galant VR4 1055/2000
 

Ah, Ya, I think I know what piece your talking about. I am not sure what other cars that would work off of. But I will do some looking.