Re: Build your Dream DSM...
 

I know its old but I got a great deal on it and couldn't pass it up.

Re: Build your Dream DSM...
 

Man! I keep trying to get rid of my SC61, but everytime I make a few other changes to the setup and redyno it makes more power. It makes more than what half of the guys that come in with billet 62 and billet 67 setups end up making.

Re: Build your Dream DSM...
 

http://t3.gstatic.com/images?q=tbn:A...yeBnIa55p-&t=1

This, and be it equipped with a 420a please.

But if I could build a dream DSM...

Evo VI Tommi Manikin

That counts right?

Re: Build your Dream DSM...
 

Sell it, save up a few more hundred, get your self a better turbo. SCM61s spool like shit and make shit power on pump and probably E85 too.

Re: Build your Dream DSM...
 

Might as well close the thread now, nobody is going to top that.

Re: Build your Dream DSM...
 

You've always made more power than everyone else though, so this really doesn't count. Upgrade to a billet 67 and leave everyone in the dust already.

Re: Build your Dream DSM...
 

I usually just buy a new turbo and then sell it before I get to use it.

Re: Build your Dream DSM...
 

Sounds like my favorite setup pretty much to the "T". :) The FP68hta was on my wish list.

Re: Build your Dream DSM...
 

The lyfe of a shop owner...

Re: Build your Dream DSM...
 

I'm still not super sold on that yet. I know some have made decent power but it just is tough to beat a evo3 for $400 less and sacrifice 20hp.

Re: Build your Dream DSM...
 

I can easily justify spending $990 on my turbo, regardless of how minimal the power gains are.

Talk to the EVO guys... they would go ghey for a turbo that cheap.

Re: Build your Dream DSM...
 

Doesn't the HTA68 flow about the same a stock evo 9 turbo?

Re: Build your Dream DSM...
 

No idea, but I would want to assume the HTA68 flows better than the IX, considering the HTA68 has a HTA wheel.

It might not have better top end but the mid-range has to be 15-20whp better for sure...

Re: Build your Dream DSM...
 

+1, single pump and a set of 1000's would be dandy.

My dream DSM:
1991 eagle talon tsi awd, black w/ sunroof and black leather interrior
Air Conditioning that works
Power Steering that works
Radiator that keeps it cool no matter what
Canadian seat belts (delete silly auto belts)
ported 2G exhaust manifold
OEM Evo3 16g
ported 2G o2 housing
Thermal catback exhaust! Or maybe buschur 3"
Supra SMIC w/ custom end-tanks
Custom LICP/UICP
Some sort of SMIM w/ stock N/A TB
Single walbro, rewired
ID 1000cc/FIC 1100cc injectors
Evo8 ECU w/ speed density conversion
GSC S2 cams w/ beehive springs&stock evo retainers
Ported 2G head w/ L19 studs
6-bolt 4GCS (2.4L) bottom-end w/ manly i-beam or MAP UD rods & JE pistons
ACT 6-puck clutch
Shep fresh 2G trans & front LSD
aluminum driveshaft
leak-free xfer case & rear diff (4-bolt)
Evo Brembo brakes w/ ss lines & ultra blue fluid
Rear sway, all strut tower bars
Koni/eibach suspension
Evo9 wheels w/ appropriate rubber for summer
stock 1Gb talon wheels w/ general snow tires for winter
No gauges
Nice stereo w/ a nice 10" sub
Bitches in the back seat

Project Option: tubular exhaust mani to fit an stock twin-scroll evo9 turbo on a DSM, possibly upgrade to a BBK Full or BBK-B down the road.

Re: Build your Dream DSM...
 

^ lol I like that scheides, took it to the next level. I might have to update my list now :)

Re: Build your Dream DSM...
 

Updated List --

1991 Black with Silver Bottom Eagle Talon TSi AWD, NO Sunroof, Black Leather Interior

Head - Mild Port, 2g, Springs, Retainers
Head Gasket - Fel-Pro PermaTorque
Cams - HKS 264 Intake / HKS 272 Exhaust
Head Studs - ARP
Block - 6 Bolt, 2.0 W/ 1g Big Rods mated to 2g Pistons (2.3 wouldn't be bad either, but trying to keep it simple)
Turbo - HTA68
Exhaust Mani. - Forced Performance Race Cast Manifold, Ceramic Coated
Intake Mani. - Hawver Motorsports Cast Aluminum Intake Manifold, Thermal Dispersant Coated
Intake - Forced Performance Intake with Recirculation mated with EVO 8/9? MAS
Boost Control - Hallman Boost Controller
Exhaust - Megan Racing 3" Downpipe (ceramic coated) to 3" Megan Racing Test Pipe W/ 3" Megan Racing Cat-Back
o2 Housing - JMFab SS o2 Housing W/ Internal Dump, Ceramic Coated
Injectors - FIC BlueMAX Fuel Injectors 950cc
Fuel Pump - Rewired Walbro 255 HP
FMIC Core / Piping - ETS 'Race' Intercooler Core w/ 2.5" piping and J-pipe, Thermal Dispersant on Core and Piping
Wideband - AEM
ECU - Eprom W/ DSMLink
BOV - Greddy Type S
Oil Cooling - Setrab Oil Cooler (thermal dispersant coated) W/ 90 Oil Cooler Housing and Boomba Oil Catch Can
Radiator - Fluidyne Aluminum Race Radiator, Thermal Dispersant Coated
ABS - Deleted
Seat Belts - Canadian
Trans - Shep Stage 3
Brakes - Custom Evo 8/9 Brakes / Rotors
AC - Super Cool
Clutch - ACT 2600
Rear End - 4 Bolt

Re: Build your Dream DSM...
 

Scheides hit the nail on the head with that list. I'd go with an FMIC instead of an SMIC due to the extra heat you'd see from the 16G on a 2.4L, but I can appreciate the sleeper logic.

Re: Build your Dream DSM...
 

If he is running E85 he wouldn't have to worry about that.

Re: Build your Dream DSM...
 

But you know what you are doing...that is a big plus, lol.

Most people slap together a bunch of parts and pray it works.

Re: Build your Dream DSM...
 

I have been building it if the evo 3 counts.