Re: Project Black Talon
 

i gotta holset if your looking for one

Re: Project Black Talon
 

Did I meet you, I cant put the face to your screen name.

Re: Project Black Talon
 

I would think it would have more to do with the 2.0 cam gears then the DOHC head. In the end the numbers do not mean much, as long as the cams are doing what they should be doing.

~John

Re: Project Black Talon
 

I believe he's in Texas, so don't think he was there.

Re: Project Black Talon
 

he definitely wasn't there

Re: Project Black Talon
 

Lol I'm in tx still. U could tell cause there wasn't a brown guy there that is a car guy. Just lb.
Nice cAr.

Re: Project Black Talon
 

Nice car man, this thing made great power!! I like the BOV too! ;)

p.s. I was the guy in the Sparco hoodie, you said you were terrible with names

Re: Project Black Talon
 

I'd like to see them back an Escalade onto those rollers. ;)

Re: Project Black Talon
 

I didn't know u had a stroker, thats why i was so lost with the numbers.

haha M, but brown people drive Infiniti's i think. oh u forgot the 22s

Re: Project Black Talon
 

Actually its a 2.4 liter. No stroker here :)

Re: Project Black Talon
 

^truufff.. Although, princess lea likes to stroke it.. wooooaaappssshh ;)

Re: Project Black Talon
 

Update u lazy mofo.

Re: Project Black Talon
 

Well a few days ago I started to hear ticking coming from my motor. Sounded like a lifter tick but gradually got worse. Pulled the valve cover and ran and the noise was not louder with the valve cover off and I knew there was a serious problem. Drained my oil and found gold shavings!

Now I pulled my oil pan and found the bushing from number one hanging out of the connecting rod. Now im like WTF! with only 7500 on this motor.

After I found that out, I removed the head to find the wrist pin actually snapped in half and was chewing up the bushing on the connecting rod. Then looking back at this thread, realised this is the same wrist pin that was too tight!

What im doing now is still in the air, this should not have happened.

http://www.mitsustyle.com/photopost/...m/IMG00162.jpg

http://www.mitsustyle.com/photopost/...m/IMG00163.jpg

Re: Project Black Talon
 

Definatly not a year for Blake 1gbs, which it's just you and me buddy. Change your sig.

Re: Project Black Talon
 

I remember having some problems with my Weisco's as well. I think I had Gosh rebush them if I'm not mistaken. That really sucks, quality control is definitely lacking.

Re: Project Black Talon
 

Well a Wiseco represenative states at my wicked 500hp level HD's are required. I bet the stockers would be still holding :rollinglaugh:

Re: Project Black Talon
 

Poor guy.

Re: Project Black Talon
 

He did offer me a discount to cope with the situation. If I do and when I do, I will have to check over there tolerances, which is kinda sad one would have to.

Re: Project Black Talon
 

A lot of guys were finding cracked Wiseco pistons too a few years ago, it was all over that other board. The pistons were still working fine, but when a couple guys found theirs cracked in 1 specific spot a few other checked theirs and found it happening too.

Re: Project Black Talon
 

I also remember that my Eagles were off ever so slightly on the big end as well.