Re: Spyder Project 2008
 

You are lucky! Now get that tranny back in there and drive that thing.

Re: Spyder Project 2008
 

Everything is all back together! Took it for a short ride. I CANT WAIT!

Re: Spyder Project 2008
 

I switched out the gas filler neck today.
My 98 one had a billion hoses coming off of it and the tank only had 2 because lack of emissions in 95. Got a 95 filler neck with only 2 hoses. So now I can pump gas without holding the trigger and hoping the gas doesnt come spilling out!

http://i259.photobucket.com/albums/h...FillerNeck.jpg

Now I just have to figure out why my front blinker doesnt work!

Re: Spyder Project 2008
 

Did you check the fluid level?

Re: Spyder Project 2008
 

Yup, it was full...

Re: Spyder Project 2008
 

Ok well was this blinker one of the things that you had rewired with your entire rewire setup under the hood? What happens when you put the blinker on does the rear one work?

Re: Spyder Project 2008
 

The rear one works, and blinks fast. He ohm checked the wires, everything under the hood is OK. So its inside the car somewhere.

Re: Spyder Project 2008
 

Blinker fixed.
Suspension installed!
http://i259.photobucket.com/albums/h...e/CIMG1937.jpg
(Thats tire shine on the tires)

MMM Sexy! :)

Re: Spyder Project 2008
 

wow car looks great! I wouldn't have been surprised if you said that white stuff is where some kid blew his load when he saw it...

Re: Spyder Project 2008
 

It looks like someone jizzed on your tires. Haha

Re: Spyder Project 2008
 

What ever what the problem with the blinker? Can we have an update with the car as well?

Re: Spyder Project 2008
 

yeah whats the deal with the car?

so whats this giant turbo you have on the shelf? pics? wtf dude. what happened to the o2 housing?

Re: Spyder Project 2008
 

The blinker was a 2 part problem. Here is a little story
Last year this was happening so I got another bulb and replaced it and it still didnt work so I assumed it was something I rewired wrong. After about 3 hrs of searching I discovered that the problem was the connection at the bulb socket. and the bulb was bad too. so I must have swapped back bulbs after the new one didnt work either. I bought a new pigtail for the blinker but I have yet to put it on.

Update on the car:
I have a nice little parts pile sitting here. Whats in it you may ask...

FP3575 turbo
FP manifold
Bare 6bolt head
FP3x cams
Tial 44mm wastegate
Custom O2 housing
New FMIC
COP
Greddy Cam Gears
Evo Brembo Calipers
Axis ultimate brake pads
SS Brake lines
Black door panels
Black rear panels
Different AEM Boost gauge
Clear Timing cover

As for whats going on this winter. I have no Idea. I hope all of it plus alot more.

Re: Spyder Project 2008
 

Very nice list of parts there. You should start a new thread with your new build/setup once you start the tear down/install/fabrication.

Re: Spyder Project 2008
 

No new parts! Save them for winter, DRIVE the thing! :D

Re: Spyder Project 2008
 

I am saving them for winter. Im gonna drive it til it brakes or the snow comes(whatever comes first) :)

Re: Spyder Project 2008
 

Sounds like a good plan. :seeya:

Re: Spyder Project 2008
 

ha, this thing is gonna be all done up, start to make some good power, then his clutch will slip or the tranny will explode... aka more down time! booo!

Can't wait to ride in it with the 3575 :)

Re: Spyder Project 2008
 

Got a new item in the mail today. A new Tial 44mm Wastegate!
Now all I need is to get some flanges and piping and finish my o2 housing/downpipe.

Re: Spyder Project 2008
 

hurry up pussy.