Re: Toms Project...
 

Those are reinforcement tabs they put on the new ones. Helps stop cracking at the seam.

Re: Toms Project...
 

The SCM61 is quite a bit bigger than the 50 trim, it is a sizeable upgrade.
I also have some FIC 950cc injectors I will be selling. Toss me a PM.

Re: Toms Project...
 

well things have kinda been pushed back a while due to lack of funds. But come april my bday present to myself is to have a running vehicle, So its all set up, the tranny will be back by the first week of april.
New exhaust (3" apexi n1), wideband O2, sensors and Southbend clutch will also be here first week of april or so. Then i will go balls deep into getting it complete before the 15th of april, then get the bastard tuned and registered.

Re: Toms Project...
 

Ok so tomorrows the day. Everything happening in one day. Too bad i dont have a web cam to put in a live feed. :)
I looked back on the first post of this thread and said "Holy shit, i had no idea what i was getting into." One month turned into three months of being down.
I have stuck by the same principle, Leave Nothing To Chance.
So far i have Removed the engine completly, got the tranny, Wideband, New Exhaust, Southbend clutch, Turbo Timer, New Plug wires, Air filter, etc etc etc. i have every part that i need.
Its just wierd to be at the end of the project finally. Im sure after 15 pots of coffee it will be done and ill do a street tune to get me by until i can get on a dyno, which with the Wideband it will be much easier then guessing that the A/F is fine. LOL
So this is what my Mod list will look like when everything is done.

Engine:
RRE 6Bolt block
RRE Stage 2 Head
2G Pistons 8.5:1
HKS Valve Springs
Ferrea Valves
NGK BPR7ES Spark Plugs
MSD 8.5mm plug wires

Drivetrain and Transmission:
Dogbox Racing Tranny
Slowboy LSD
Metal Shifter Bushings
Energy Suspension Motor Mounts
Southbend DXD 6 puck Dual Friction Clutch
Fidenza Flywheel
Tokico Shocks and struts
Hawk Performance Brake Pads

Turbo and Intake:
Turbonetics RS49 Turbo Stage 3 PTE exhaust housing upgrade
Tial 38mm External Wastegate
Front Mount Intercooler
Magnus Intake Manifold
1g N/T Throttle body
Custom Piping 2.5 in made by me. :)
Greddy Type S BOV
Greddy Turbo Timer W/Harness
Vibrant Performance Air Filter

Exhaust:
Ported Exhaust Manifold
Apexi N1 Downpipe
Apexi N1 Exhaust

Fuel and Engine Management:
DSMLink Fuel Management System
AEM UEGO Wideband O2 Sensor
Magnus Fuel Rail
Mesa Hose Fuel Lines
Fuelab 525 FPR
Walboro 255HP Fuel Pump
680cc Injectors

Misc:
Turning Rotors
New Fuel Inj Plugs
New Knock Sensor
Painted and repaired Fenders and engine bay.
WISH ME LUCK

Re: Toms Project...
 

Good luck!

Re: Toms Project...
 

x 2

Re: Toms Project...
 

lets see some pics and hopefully all goes well

Re: Toms Project...
 

You are going to need luck to get that all done in one day! Give 'er hell!

Re: Toms Project...
 

Nice! Go for it man! Where are you at with everything? Post updates & pics pics pics!!!

Re: Toms Project...
 

I have to go pick up my clutch this morning. Ill try and post up pics this afternoon.

Re: Toms Project...
 

FUCK, just got back and he ordered the exhaust for a 89-94 GSX by accident.
I called Extremepsi and they want me to ship it back to them and then they will inspect it for damage and then ship me the right one but ill incur the shipping charges. this fucking sucks.

Re: Toms Project...
 

The car will run without the exhaust. Get er dun!

-A. Swift

Re: Toms Project...
 

Smooth move ex lax! lol

Re: Toms Project...
 

I agree. But Tom. This is why you DON'T throw away stock parts..

Re: Toms Project...
 

Well luckily Apexi is located in Orange County. They are taking this one and giving me the right one for free. They are pretty cool.

Re: Toms Project...
 

Ok the motor is in, but there is still much to do. It seemed like it was going to happen today but with the late start because the clutch still needed to arrive before starting, and with my roomate being gone for a couple hours. I ended up getting the engine in the bay and almost in all of the mounts by myself, my roomate arrived just in time to help finish getting everything lined up.
The magnus mani and fuel rail are mounted, the exhaust mani and turbo are mounted. Now it gets down to all of the details. Which sucks.
I was a complete idiot when i took this motor apart, i managed to lose a LOT of bolts. So tomorrow after i go to Apexi to pick up my exhaust i gotta go to Home Depot and pick up a shit ton of bolts. Also my new rims arrive tomorrow (Project2g is trading my GSX rims for the chrome rims that came on his car, because he is going to put those on the car he is selling)
Looks like im taking the day off tomorrow as well. :)
Tom

Re: Toms Project...
 

Days off are nice :) Snap some pics for us!

Re: Toms Project...
 

Here you go.

Re: Toms Project...
 

Looks awesome Tom!!

Re: Toms Project...
 

Tom, Reverse is going to be so fucking scary for you now, it's not even funny.