![]() |
Re: GsXtUrBo98's 2G project thread
true
|
Re: GsXtUrBo98's 2G project thread
Why BR7ES and not BPR7ES?
|
Re: GsXtUrBo98's 2G project thread
Do you have another stock coil to try? How old does your coil look?
|
Re: GsXtUrBo98's 2G project thread
You could have a bad plug. I know you said they are brand new but one could be bad. I had that happen to me before. You spark plug wires could be shorten out. You have a good battery and volts?
|
Re: GsXtUrBo98's 2G project thread
Quote:
|
Re: GsXtUrBo98's 2G project thread
Did you also try new quality wires?
|
Re: GsXtUrBo98's 2G project thread
I have Taylor 10mm wires that I bought just before Brainerd last year. I have an extra set of plugs that I could throw in there and see if it does anything.. One coil was bad last year so I swapped it out and all was fine. I have a brand new yellow top battery in my car as well.
|
Re: GsXtUrBo98's 2G project thread
No reason, I actually run bpr7es, but wanted to try br7es heard some good things plus seems like no-one stocks bpr's up this way. :(
|
Re: GsXtUrBo98's 2G project thread
Do you have a volt gauge to make sure you have enough volts? Somebody last year had a problem they werent getting enough volts. just throwing stuff out there try to help.
|
Re: GsXtUrBo98's 2G project thread
We usually use the BR plugs on nitrous cars and maybe some crazy high builds. Might lose some compression ratio with the short plug though. :)
|
Re: GsXtUrBo98's 2G project thread
Quote:
|
Re: GsXtUrBo98's 2G project thread
What alternator should I get? I've heard a saturn one is good but also a galant vr4 one too? which is better? I want to get this thing ready for proving grounds this year! gonna be a beast if my plans pull through. I'm keeping my current setup but want to fix the break up issues and see if I can turn up the boost to make the 600awhp mark. I want at least 35 psi as I made 542awhp in shoot out mode on Shanes dyno. Whatever it takes and let er buck!
|
Re: GsXtUrBo98's 2G project thread
The galant one will just bolt right up, have you checked your grounds?
I'd add some too, it can't hurt. |
Re: GsXtUrBo98's 2G project thread
Ya my grounds are legit. I guess i could add more but the alternator cel has been there for years.. Lol i know i suck ha ha
|
Re: GsXtUrBo98's 2G project thread
I picked up a new/used alternator from Nick (Cornfed2.4) but I'm running into probelms. No fuel pressure and I'm not hearing my fuel pump turn on at all... I am no wire wiz so this sucks.. I checked in line fueses and they all seem legit so I'm not quite sure where to start.. I know I should be checking voltage but I suck at doing that lol. Wiring is the worst of my abillities of working on my car.
I want this thing ready for proving grounds this year! haha |
Re: GsXtUrBo98's 2G project thread
Is the car at your place? I could maybe swing over sometime this week or next weekend and help you with it
|
Re: GsXtUrBo98's 2G project thread
Maybe check the fuse on the boost a pump. Mine blew once which left me stranded with no power going to the pump.
|
Re: GsXtUrBo98's 2G project thread
+1 for what brad said. There is also the mpi relay under the dash that may have gone bad. It's a gold box located under the radio on the right side.
|
Re: GsXtUrBo98's 2G project thread
Quote:
|
Re: GsXtUrBo98's 2G project thread
I checked all in line fuses including the BAP.. And yes it'a located at my place still. That would be cool if you were able to swing by and give a hand sometime this week.
|
All times are GMT -5. The time now is 09:31 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.