Re: the evo 3 swap parts are coming
 

i love the new set up so much.. arrgg.

Re: the evo 3 swap parts are coming
 

I see what you did there.


















You skallywag.

Re: the evo 3 swap parts are coming
 

http://i122.photobucket.com/albums/o...o/DSC04700.jpg


That's not the finished piece is it? I'd be worried about leaving such sharp edges on aluminum. It creates stress points for the metal to tear. Aluminum is strong, but once it starts to tear can be very weak. Obviously that would be unwanted on a part of the brake system.

Re: the evo 3 swap parts are coming
 

Alu in general is unsuited to brake systems anyway. Way to much thermal expansion.

Re: the evo 3 swap parts are coming
 

Is that why the expensive 2 peice rotors use an aluminum hat? I am also a little worried about the grinding points in the bracket though.

Re: the evo 3 swap parts are coming
 

Is that also why most 4 piston calipers are made from alumnium?

Re: the evo 3 swap parts are coming
 

that was bracket number 1. there were others that were made for the finnal ones.

also go look at 90% of the big brake kits they use alum brackets,alum top hats on the rotors,and alum calipers

Re: the evo 3 swap parts are coming
 

pre-cruise add ones
tinted the windshild sense I can have visors with the cage
http://i122.photobucket.com/albums/o...Picture002.jpg
also put in the trust harness I have had for ever.
http://i122.photobucket.com/albums/o...Picture004.jpg
http://i122.photobucket.com/albums/o...Picture003.jpg

Re: the evo 3 swap parts are coming
 

Looks good. When will we see paint?!

Re: the evo 3 swap parts are coming
 

I didn't even notice your harnesses!

Re: the evo 3 swap parts are coming
 

New update. I went this to pick up the evo 3 seats from the post office. Got them put back together they were shipped in 3 boxes from japan. I ended up trading the sti turbo for them.
http://i122.photobucket.com/albums/o...cture002-1.jpg
http://i122.photobucket.com/albums/o...cture003-1.jpg
http://i122.photobucket.com/albums/o...cture004-1.jpg
will get better pics later just used my phone could not find the charger for the camra

Re: the evo 3 swap parts are coming
 

Very nice!

Re: the evo 3 swap parts are coming
 

Nice they look really similar to mine, but it way better condition.

Re: the evo 3 swap parts are coming
 

i have 16" kosei k1 wheels, which in agressive offset, are told they could clear evo brembos. i tried them on my friends evo with no success. they hit the caliper.

-A. Swift

Re: the evo 3 swap parts are coming
 

I like those. Nice pickup!

Re: the evo 3 swap parts are coming
 

Looks nice!

Re: the evo 3 swap parts are coming
 

Freaking awesome, what seats were in there before? I love the new ones!

Re: the evo 3 swap parts are coming
 

You had Evo 1 seats in it before, right? The new seats look nice!

Re: the evo 3 swap parts are coming
 

ya i had the evo1 fronts to start off now have the evo 3 seats. i wil save the evo 1 fronts and use them in the 51 ford

Re: the evo 3 swap parts are coming
 

here are some new pics have not had time to update it for a while.

Got them from ricer Pete. took them out of his car when we put the jdm lights on his car. they are cn lights 6k low beam only no hi beam
the kit I had the left side in already when I took a pic with the phone.
http://i122.photobucket.com/albums/o...1958060292.jpg
the one in with the silverstar motorcycle use only bulb in the right side
http://i122.photobucket.com/albums/o...1958009300.jpg

Re: the evo 3 swap parts are coming
 

first off winter and summer tires suck. I have curbed 3 of the 18s from sliding in the snow and ice and the cusco camber plates dont mean crap with there marks so the front 2 tires are destroyed already.

So I just picked up a set of rota boosts 17*8 and a set of all season 215-45-17 tires for 250.00 from a local that painted them 2 diffrent colors to see what he liked better then started to strip and repaint the other 2 but gave up. They will be droped off to a buddy to get blasted and powder coated black tonight. I will have them back in less than a week.


http://i122.photobucket.com/albums/o...cture002-2.jpg
http://i122.photobucket.com/albums/o...cture003-2.jpg
http://i122.photobucket.com/albums/o...cture004-2.jpg

Re: the evo 3 swap parts are coming
 

What really pissed me off I tryed to fit them and found out that the centering ring was way to small for a dsm/evo hub. So me and my dad made a tool out of a 2 5/8 alum hole saw and a pvc pipe adaptor that fit in to the center ring hole on the rim to cut them out to make them the right size. After 2 hours of cutting all 4 are done and will be out for powder tomorrow now.
here is the pics of what we did to the rims
the stock size hole 56.1 mm
http://i122.photobucket.com/albums/o...2071248914.jpg
cutting to the new size total 67.1 mm
http://i122.photobucket.com/albums/o...2072310130.jpg
one fully cut it is just the back side of the rim does not go all the way through the rim
http://i122.photobucket.com/albums/o...2071204014.jpg
the tool
http://i122.photobucket.com/albums/o...2071278831.jpg
after the 4th rim the pvc broke
http://i122.photobucket.com/albums/o...2073738663.jpg
what was cut out of them and my front h&r spacer we used to check the rims to make sure they were cut deep enuf
http://i122.photobucket.com/albums/o...2073757715.jpg

Re: the evo 3 swap parts are coming
 

back from Kerry
got them back from my buddy last night. they were 240.00 for the sandblasting,polish,powder coating
sorry for the cell pics
http://i122.photobucket.com/albums/o...cture003-3.jpg
http://i122.photobucket.com/albums/o...cture002-3.jpg
http://i122.photobucket.com/albums/o...Picture001.jpg

Re: the evo 3 swap parts are coming
 

Sexy! I cant wait to see them on the evo! When do you think you'll have them on?

Re: the evo 3 swap parts are coming
 

Damn, talk about adapt and overcome, thats some innovation!

Re: the evo 3 swap parts are coming
 

meeting pete at his work at 4pm to get the tires put on. so I should have them on tonight. then will be looking for new 18's soon for spring.

Re: the evo 3 swap parts are coming
 

the rims look nice, post a pic when there on :-D

Re: the evo 3 swap parts are coming
 

Looking good! bet it will be nice to have some good traction!

Re: the evo 3 swap parts are coming
 

Looking good!

Are you putting atleast all seasons on these for the winter. ;)

Re: the evo 3 swap parts are coming
 

that I am they came with the all seasons that will last the winter anyway. then I will just use the rims for rolling around other cars and for winter storage next year

Re: the evo 3 swap parts are coming
 

Nice! So these will fit over the brembos without the spacers?

Re: the evo 3 swap parts are coming
 

still have to run the spacers up front. I even with stock evo 8/9 rims I would have to run them

Re: the evo 3 swap parts are coming
 

So you drove around all winter with summer tires on and just now put all seasons on? http://www.galantvr4.org/ubbthreads/...mlins/rofl.gif

Re: the evo 3 swap parts are coming
 

winter is not over yet. it is bills come first and I did not get my winter car finnished up.

Re: the evo 3 swap parts are coming
 

Did you ever have it aligned or did you just go by the markings on the camber plates? If so, then your camber might have been close, but it's toe that chews tires up. That and too much power.

Re: the evo 3 swap parts are coming
 

it was aligned with the 15's when I had to do it at tires plus when they could not do it they had no clue how to.
then it was aligned when I put on the 18's put on a new tie rod end. toe was good but camber was off.
It was just redone by pete no one elce had a clue on how to do it and get the camber right this time at good year

Re: the evo 3 swap parts are coming
 

big thanks to ricer Pete :) for getting my tire put on last night after goodyear closed. got them all on just a few mins ago and they do look nice. makes me want to save up and get a set of advan RGII's for the car now ;). but probably not going to happen on the evo maybe get a set for the spyder.

first pic just the front 2 on the car with the dxr's on the back still. I like both sets of rims on the car. The only problem with the rota boosts I have not seen any in 18*8 or 18*7.5 in gloss black so I will just get a 2nd set of the dxr's and have 1 good spare rim for the car
http://i122.photobucket.com/albums/o...o/DSC04933.jpg
with all of them on you can kind of see them with alys winter dsm in the way.
http://i122.photobucket.com/albums/o...o/DSC04935.jpg
http://i122.photobucket.com/albums/o...o/DSC04934.jpg

Re: the evo 3 swap parts are coming
 

I like the Rotas better than the DXRs

Re: the evo 3 swap parts are coming
 

looks good!

Re: the evo 3 swap parts are coming
 

+1