![]() |
Re: My Talon
^ double check the wires on the plug..sometimes they are reversed for HID's for some reason..
|
Re: My Talon
Turn thr plug that goes into the red socket around backwards and it should work. That's what I had to do.
|
Re: My Talon
Quote:
|
Re: My Talon
Done/Runs.
Gonna do a boost leak test just because. I hate using a 4" tester.... |
Re: My Talon
About time!!!!!!!!
|
Re: My Talon
Good to hear! Gonna be at the dyno day?
|
Re: My Talon
Congrats.
|
Re: My Talon
Quote:
|
Re: My Talon
^Stop being a drama queen
|
Re: My Talon
Well my tacky carbon hood showed up at Primo, hope to put it on tonight along with the Aerocatch hood pins, and I also got some more gear lube to change after breaking in the tranny. I also had to swap wire in a connector to get my 5000K hids working. I like the way they look. Not blue, but white
|
Re: My Talon
Nice, post up some pics when you get that hood on, kinda excited to see how it looks.
|
Re: My Talon
I WILL NEVER AGAIN INSTALL AEROCATCH HOOD PINS ON A CARBON FIBER HOOD! What a pain the ass. The product itself is good, but jesus christ was it a huge bitch.
And my hood fits horrible, wouldn't even close all the way. I'll explain more later. |
Re: My Talon
Hahahaha. I know what you are talking about.
|
Re: My Talon
Some updated pics. Like I said previously, I WILL NEVER INSTALL AEROCATCH HOOD PINS IN A CARBON HOOD AGAIN!
Total pain in the ass... http://i1010.photobucket.com/albums/...0519000403.jpg http://i1010.photobucket.com/albums/...520001055b.jpg http://i1010.photobucket.com/albums/...520001055a.jpg http://i1010.photobucket.com/albums/...0520001055.jpg Shep Stage 4 MMMM http://i1010.photobucket.com/albums/...0509000010.jpg Almost done! Notice the Redline Lightweight Shockproof. http://i1010.photobucket.com/albums/...0509001650.jpg |
Re: My Talon
At least you hood is somewhat flat, try it on a hood with sharp angles.
|
Re: My Talon
Nice, My bro and I didn't have that much trouble maybe about an hour, it was a little scary cutting the hood.
|
Re: My Talon
Looks sharp Kevin!
|
Re: My Talon
I like it a lot!!
|
Re: My Talon
I'll get some non cell phone pics later!
Whats next? For Sale lol. Maybe... And maybe a new fuel system ;) |
Re: My Talon
I love your car! That's exactly what I wanted my old maroon one to look like lol. Do you have any other pics of the aerocatch install? And when you get better pics could you PM me some of the originals? I'm due for a new wallpaper =)
|
Re: My Talon
Do the fuel system!! Fuelab external ftw!!
|
Re: My Talon
^That might be overkill......
Or would it? |
Re: My Talon
depends on the future of this car?
dun dun dun... haha I might just do twin walbros, etc. |
Re: My Talon
Quote:
|
Re: My Talon
^Do you even have a clue what you are talking about?
A shit ton of DSMers run twin walbros, a few locally even just fine. |
Re: My Talon
There's a handful of options, and they all pretty much work.
|
Re: My Talon
Quote:
I know what I am talking about, I personally would rather run a boost-a-pump. I know that lots of guys around here run twins, I just would not do it on my car. I have never liked the idea of what would happen when one of the 255's goes to shit during a WOT pull vs. a single w/ BAP going out. One of the double's goes out= lean condition, Single w/ BAP goes out= car dies. |
Re: My Talon
^lmao, alright man.
so you won't go lean when the single pump shuts down during a pull? Will you even need to go bigger than a rewired 255 anyway? |
Re: My Talon
Quote:
Got a chance to have my car in a photoshoot last night, I'm excited to see how the pics turned out! Cool setting, people who know what they are doing, and some cute Hmong girls ;) It might even be in a local calander! |
Re: My Talon
^I'm not talking to you, i know u are already maxed out or close by your numbers.
Congrats on the shoot. |
Re: My Talon
Quote:
The car would just die. if the single pooped out during a pull. My car? I will need more than a single 255. |
Re: My Talon
My camber is so bad my KDWs were shot after two summers. I threw on some crappy used Pirelli p6 All Seasons HAHA (junk)
Got my baby misfire figured out, gave a few friends rides. Spun em doing a 30mph 2nd gear pull!! Wow! :) Gave another ride... Then, Waaaaaaaaaaaaaaa PSSSH/BOOM *fuk* Pull over, coolant everywhere, big as hole in my plastic timing cover... Blown headgasket, cylinder #1, timing belt side. Literally blew out the timing cover. Ahh, DSMs :) |
Re: My Talon
But were the misfires fixed? :)
|
Re: My Talon
Quote:
Now... Another OEM gasket :) |
Re: My Talon
Sorry to hear this Kevin..
|
Re: My Talon
weird, L19s?
|
Re: My Talon
That sucks dude!
At least like Shane said, the mis fires were fixed at least. haha |
Re: My Talon
I might have this fixed on sunday, definately before brainerd. Hopefuly the head doesnt have some big ass hole lol.
|
Re: My Talon
Quote:
|
Re: My Talon
^He also has an evo?
|
All times are GMT -5. The time now is 01:03 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.