Re: GsXtUrBo98's 2G project thread
 

I have a date with Shane on July 14th at 3! Just need to buckle down on the car and get it there so I can at least make it to the Import vs. Domestic.

Re: GsXtUrBo98's 2G project thread
 

I installed my cut off switch last night and today I got my fuel pump rewire kit installed along with my boost a pump wired up too! BIG THANKS TO BRAD ( C3L1CA ) for swinging by and telling me which wires needed to be cut and connected! I also cleaned the car and this is how it sits now.

Re: GsXtUrBo98's 2G project thread
 

Car looks sick man!

Re: GsXtUrBo98's 2G project thread
 

Car looked super clean and really made me miss my dsm! Glad I could be of some help. Hope you hit your goals with it!

Re: GsXtUrBo98's 2G project thread
 

Lookin sexay.

Re: GsXtUrBo98's 2G project thread
 

Looking good Chris! When are you off to Shane for tuning? Any more little bugs to get sorted out?

Re: GsXtUrBo98's 2G project thread
 

Thanks guys! I have some bugs to take care of still. Need to do my head studs, throttle body seals, uicp needs bead rolling, and my exhaust needs finishing up.

Off to see shane on the 14th and bir on the 16th

Re: GsXtUrBo98's 2G project thread
 

Good luck man, i hope u get it done in time i want to see u make some good passes up there.

Re: GsXtUrBo98's 2G project thread
 

I hope so too

Re: GsXtUrBo98's 2G project thread
 

Dropped my car off at primo yesterday for the exhaust and dump tube to be finished up.

Re: GsXtUrBo98's 2G project thread
 

Still have to do the head studs and throttle body seals but everything else is done! Hope I can get my car back from Primo asap

Re: GsXtUrBo98's 2G project thread
 

I replaced the seals in the 1g throttle body and picked up a new gasket today from mitsu and got that on the car. Jesse said my exhaust and dump tube should be done tonight and I will be picking it up tomorrow and doing the headstuds at my house if all works out well... Things that have to be completed by tomorrow night.

Head studs
exhaust welded up
dump tube welded and mounted
uicp welded and mounted

I think that this is it! hope all goes well and I can get everything done for Shane on thursday at 3

Re: GsXtUrBo98's 2G project thread
 

OK so, I brought my car to Shane today and we gave it our best. I am running into ignition issues about 27psi so we had to stop at that mark... With the ignition issues being fixed he said I would have no problem getting over 500awhp on his dyno.

He also recommended running speed density with a AEM 5 bar. My GM MAF is all over the place. My main problem with the spark is that I'm not getting enough volts from my alternator to my battery. But I'm also throwing a alternator CEL. Any how here's the graphs.

Re: GsXtUrBo98's 2G project thread
 

Awesome!

Re: GsXtUrBo98's 2G project thread
 

http://www.youtube.com/watch?v=mncpX5O16Qw&hd=1

Re: GsXtUrBo98's 2G project thread
 

Internal gate? And update your sig :).

Re: GsXtUrBo98's 2G project thread
 

Nice numbers!

Wish I would've been able to stick around and watch.

Re: GsXtUrBo98's 2G project thread
 

Nicely done Chris, glad to see things worked out for you. See you around man!

Re: GsXtUrBo98's 2G project thread
 

Thanks guys!

Tial 44 external

Re: GsXtUrBo98's 2G project thread
 

good job dude!