Re: My Talon
 

Here

Re: My Talon
 

He said it was at 28psi with 18 peak timing.

Re: My Talon
 

Dat graf is sik yo!

Re: My Talon
 

I just thought I'd make this power at a lower boost level, and that spool would be better.

Anyone have any thoughts? BAD boost leak?

Re: My Talon
 

You didn't boost leak check you're car before the dyno/tune??

Re: My Talon
 

I'd check for boost leaks for sure. But you're also on a mitsu exh side right?

Re: My Talon
 

Looks like the boost falls off up top a little on that run, maybe thats why you didn't make more horse powa y0. haha

Still some damn good numbers and has got to be a fun car!

Re: My Talon
 

Yes, I did.

Ha, there was kinda a boost leak at what appeared/sounded like the turbo itself. I checked with soapy water, etc. I gave up and called it good.

If it was a bad boost leak, wouldn't we have noticed something on the dyno?

Re: My Talon
 

Pretty sure the difference between our setups was turbo choice, and you have a SMIM.

But at like a few pounds less boost, you made more power and torque, and spooled faster.

What gives? Holset ftl?

Re: My Talon
 

I'd say more along the lines of FP and ball bearing FTW.
Still nothing to complain about. I'm on a 2.3 stroker and it took 27psi to make almost exactly those numbers. That isn't bad power for a 2.0 on 27psi, congrats.

Re: My Talon
 

Get us some dyno graphs and logs.

Also what you big boy using for injectors, i have a chance to upgrade my 950s.

Re: My Talon
 

frick..I wish my graph looked like that!

Re: My Talon
 

I'm happy with the car, it made the numbers I've always wanted, it's fun to drive, what more could I really want. I am content.

Re: My Talon
 

So when are you gonna get us a real dyno graph or some logs?

Re: My Talon
 

^Good question.

Re: My Talon
 

Kevins car pulls really good, we ran a few times tonight with me at 22psi(I think I have a bad boost leak) I would pull on him till 4th and then he would pull on me.. He kept telling me to shift faster and I kept saying I dont have a shep tranny. It was a very good time.

Re: My Talon
 

lol. Nice. But at 22psi I thought you said you were only making 350whp.

Re: My Talon
 

I think closer to 380-400 range, but alot more torque than kevin has.

Re: My Talon
 

If you had under 400tq when you were making 450hp, you'd have less tq if you're making less power. So your torque was probably a lot closer to mine then.

Re: My Talon
 

I had the best race of my life last weekend.

The organic disk isn't up to par, so a new ACT 6 puck ceramic sprung disk is going in.

New plugs and fuel filter on Sat, Rockfalls on Sunday.

I just got tie rod ends and ball joints, waiting on wheel bearings. Doing all that the following weekend.

The maybe a forsale sign? :p