Re: the evo 3 swap parts are coming
 

I didn't know you could do that.

Re: the evo 3 swap parts are coming
 

Doing it that way is much easier than cutting the pillars, and safer.

Re: the evo 3 swap parts are coming
 

I am getting a pattren to make backets to put on 3s 4 pistion calapers on the evo and am waiting to hear back on the part list to have it 5lug also. With all us parts

Re: the evo 3 swap parts are coming
 

I'd be interested in a set as well. I'm looking to put the 3000GT VR-4 brakes on my sled.

Re: the evo 3 swap parts are coming
 

If you wanted to make some $ id be interested in a pair as well

Re: the evo 3 swap parts are coming
 

I will make a few sets as soon as I get the pattern

Re: the evo 3 swap parts are coming
 

you still have that rear disk conversion. i'd be interested in them for my 00 mirage de coupe

Re: the evo 3 swap parts are coming
 

pm me if you want to know if I have parts
but it has been sold and shipped

Re: the evo 3 swap parts are coming
 

Were we not informed of this video?

http://www.youtube.com/watch?v=evQPYtX9PYg

Re: the evo 3 swap parts are coming
 

That was in a dyno thread from the spring dyno day at LSE :D

Re: the evo 3 swap parts are coming
 

well the clutch took a shit last night on the way home. The act 2900 spun in 1st -3rd. now I have to just push the pettle in 1/2".

Re: the evo 3 swap parts are coming
 

Sounds like it is time for a new disk! A 2900 will hold up fine at your power level. Did you double check the height of the flywheel step?

Re: the evo 3 swap parts are coming
 

I know it is the right step for it. It has been fine till last night. I do have a exedy fly and 3puck clutch at home but I dont know if I realy want to put it in there. It is the one that came with the front clip

Re: the evo 3 swap parts are coming
 

Hahaha The comments people left on that video are pretty funny. Jet, was that you on there?

Re: the evo 3 swap parts are coming
 

Yep :D

Re: the evo 3 swap parts are coming
 

the evo doors showed up yesterday and they are mint only 2 small dents that can be pdred out so it will be less body work for kevin and I when the time comes

Re: the evo 3 swap parts are coming
 

Now you just need the 5-lug conversion and buy my Volks.

Re: the evo 3 swap parts are coming
 

I would if I had the cash. take payments lol

Re: the evo 3 swap parts are coming
 

just went through my book and found out what this thing has cost me so far
before any of the evo parts were sold 13,279.32
all the evo parts that I have sold 4,953.26
so far I have a total of 8,326.26 into the car as it sits.
I am glad the 2nd clip came with the cusco front and rear lsd's and hks short shifter.

Re: the evo 3 swap parts are coming
 

That's way less than I've spent, but I haven't kept very good records of my spending. At least mine is mostly one color! zing! j/k.

Re: the evo 3 swap parts are coming
 

dirty as hell
http://i122.photobucket.com/albums/o...o/evo008-1.jpg
http://i122.photobucket.com/albums/o...o/evo002-1.jpg
http://i122.photobucket.com/albums/o...o/evo004-1.jpg
http://i122.photobucket.com/albums/o...o/evo003-1.jpg

Re: the evo 3 swap parts are coming
 

the evo II door going to wait till spring to put them on now
http://i122.photobucket.com/albums/o...o/evo006-1.jpg
http://i122.photobucket.com/albums/o...o/evo005-1.jpg
http://i122.photobucket.com/albums/o...o/evo007-1.jpg
http://i122.photobucket.com/albums/o...o/evo001-2.jpg
http://i122.photobucket.com/albums/o...o/evo009-1.jpg

Re: the evo 3 swap parts are coming
 

Hughes and I helped Mark install his xmas present into the evo yesterday.

Cusco 6-point bolt-in chromoly roll cage
http://www.scheides.com/albums/decja...4666.sized.jpg

http://www.scheides.com/albums/decja...4667.sized.jpg

http://www.scheides.com/albums/decja...4668.sized.jpg

http://www.scheides.com/albums/decja...4669.sized.jpg

http://www.scheides.com/albums/decja...4670.sized.jpg

http://www.scheides.com/albums/decja...4671.sized.jpg

http://www.scheides.com/albums/decja...4672.sized.jpg

http://www.scheides.com/albums/decja...4673.sized.jpg

http://www.scheides.com/albums/decja...4674.sized.jpg

http://www.scheides.com/albums/decja...4675.sized.jpg

Re: the evo 3 swap parts are coming
 

http://www.scheides.com/albums/decja...4677.sized.jpg

http://www.scheides.com/albums/decja...4679.sized.jpg

Unfortunately, Mark's new A-pillar gauge mount doesn't fit so hot with it:
http://www.scheides.com/albums/decja...4683.sized.jpg

http://www.scheides.com/albums/decja...4685.sized.jpg

http://www.scheides.com/albums/decja...4690.sized.jpg

http://www.scheides.com/albums/decja...4692.sized.jpg

Mark came up with a pretty good temporary solution
http://www.scheides.com/albums/decja...4693.sized.jpg

http://www.scheides.com/albums/decja...4694.sized.jpg

Re: the evo 3 swap parts are coming
 

http://www.scheides.com/albums/decja...4695.sized.jpg


http://www.scheides.com/albums/decja...4696.sized.jpg

http://www.scheides.com/albums/decja...4701.sized.jpg

http://www.scheides.com/albums/decja...4702.sized.jpg

http://www.scheides.com/albums/decja...4703.sized.jpg

Only took a few hours to get the interior out, install the cage, and get everything back in the car. Very nice solution, thanks for letting me help mark!

Re: the evo 3 swap parts are coming
 

thanks for the help and the area to work on it and all the pics

Re: the evo 3 swap parts are coming
 

The install went smoother that I thought it would, makes me think a bit ;)

Re: the evo 3 swap parts are coming
 

I acctually just saw your thread on the DSM-link forum. Dayumm!! Lots of work went into that thing, lookin really nice. I can't wait to see it in all matching colors!!

NICE JOB!!!

Re: the evo 3 swap parts are coming
 

Matching colors? No your wrong real JDM cars dont match. Lol Looks good still! Thats a Nice Cage too.

Re: the evo 3 swap parts are coming
 

just got my evo 8 rear hubs. I am going to try to use the ebrake set up also so I could run the evo 8 2pistion brembos on the back
http://i122.photobucket.com/albums/o...o/DSC03566.jpg

Re: the evo 3 swap parts are coming
 

got the front hubs yesterday. Traded a 2g colom for them. I now have the parts to do the 5 lug swap. Now I just have to find a deal on front and back evo brembo brakes
http://i122.photobucket.com/albums/o...o/DSC03567.jpg

Re: the evo 3 swap parts are coming
 

EvoM.net for the brembos...ebay ones seem to not be in the greatest shape ever. You probably already know this though. However, that is where I have seen rotors for sale for by far the cheapest.

This summer I am planning on tackling the Brembos on the 2g fun. Doesn't sound too bad.

Where exactly do you find your parts like the Cusco cage? It always interests me to see where people are getting parts from. And I need some new sources for stuff.

Re: the evo 3 swap parts are coming
 

99% of the rare jdm parts come from jhot-imports when they get shipments of evo I-III parts.

I dont care on the shape of the brake's I can rebuild them and will be powder coated blue any way.

also
the rear evo hubs just cost me 78.00 now. I just sold the abs sensors out of them for 100.00 on evom

Re: the evo 3 swap parts are coming
 

Yeah, I was planning on rebuilding mine and having them powder coated as well. Better safe than sorry anyway... I haven't looked at Jhot in a long time, I will have to look there again.

Re: the evo 3 swap parts are coming
 

they have 2 places now
the orignal in agusta GA
and the new one in denton TX
and big on ebay

Re: the evo 3 swap parts are coming
 

What else is left to make it like a real one? You seem to have pretty much everything.

Re: the evo 3 swap parts are coming
 

just part of of the main shell is the only thing left that is mirage. every bolt on panel is evo and every thing inside is evo

Re: the evo 3 swap parts are coming
 

Sweet.

Re: the evo 3 swap parts are coming
 

when ya gonna paint it?

Re: the evo 3 swap parts are coming
 

when it gets warm