MitsuStyle

MitsuStyle (http://www.mitsustyle.com/forums/index.php)
-   Project Talk (http://www.mitsustyle.com/forums/forumdisplay.php?f=5)
-   -   SE take two! Err, make that three! (http://www.mitsustyle.com/forums/showthread.php?t=29098)

Kracka 03-20-2012 09:19 AM

Re: SE take two!
 
I drove my X up once for a DB tune before going to Cobb, but Andrew hasn't gotten a tune anywhere yet. I always used to have DB tune my IX, but that's when I lived in MN.

Revobasher 03-20-2012 10:12 AM

Re: SE take two!
 
So even would a bad tune isn't a bit surprising one of these Howard rods would snap and at that power level?

Kracka 03-20-2012 10:16 AM

Re: SE take two!
 
With a bad tune it's not about power, it's about cylinder pressure. High compression pistons + a lot of boost + too much timing + E85 is a dangerous combination for an inexperienced tuner.

Revobasher 03-20-2012 10:26 AM

Re: SE take two!
 
Gotcha... thanks for clarifying. :)

Zivman 03-20-2012 11:41 AM

Re: SE take two!
 
Quote:

Originally Posted by Kracka (Post 402200)
I drove my X up once for a DB tune before going to Cobb, but Andrew hasn't gotten a tune anywhere yet. I always used to have DB tune my IX, but that's when I lived in MN.

gotcha...

Zivman 03-20-2012 11:42 AM

Re: SE take two!
 
Quote:

Originally Posted by Revobasher (Post 402204)
So even would a bad tune isn't a bit surprising one of these Howard rods would snap and at that power level?

with a f^cked up tune anything is possible. it can blow the best of components apart

Revobasher 03-20-2012 12:19 PM

Re: SE take two!
 
Quote:

Originally Posted by Zivman (Post 402215)
with a f^cked up tune anything is possible. it can blow the best of components apart

yeah.. I wasn't pointing fingers.. just was surprised as I believe Chris had mentioned this is the first of these rods to EVER fail.

Kracka 03-20-2012 01:27 PM

Re: SE take two!
 
First to ever completely snap, they did have a rod bend north of 1000whp once.

goodhart 03-20-2012 03:20 PM

Re: SE take two!
 
Steve hills Evo had a bent olivers as well.

PlanoEvo 03-25-2012 08:41 PM

Re: SE take two!
 
Got some good work done this weekend the head came off and to be expected some damage at least 3 bent valves in #3 and some combustion chamber stuff too. I've sent the EF3 back to MAP in the process of becoming an EF4 and I will shipping the Head back to MAP as well for some MAP TLC. Sould have the engine out next weekend and start putting it back together as soon as the head comes back then a mad rush to get it ready to drive up for the Spring Cruise can i get a Hell Yeah!!!!

PlanoEvo 03-25-2012 09:54 PM

Re: SE take two!
 
Damn I'm getting good at this....

Car in repair
http://i80.photobucket.com/albums/j1...arinrepair.jpg

Hole front side
http://i80.photobucket.com/albums/j1...efrontside.jpg

Hole back side
http://i80.photobucket.com/albums/j1...lebackside.jpg

Pistons
http://i80.photobucket.com/albums/j1...ak/Pistons.jpg

Fucked #3 piston
http://i80.photobucket.com/albums/j1...ckedPiston.jpg

Head and Intake manifold
http://i80.photobucket.com/albums/j166/amkjak/Head.jpg

JET 03-26-2012 02:53 AM

Re: SE take two!
 
Owie!!

Kracka 03-26-2012 07:53 AM

Re: SE take two!
 
Any damage to the transfer case this time?

turbotalon1g 03-26-2012 07:55 AM

Re: SE take two!
 
ouch

PlanoEvo 04-07-2012 12:16 PM

Re: SE take two!
 
Turbo looks close to being done...words out on the the head as damage to the combustion chamber occurred waiting to hear back from MAP as they are doing their best to salvage it... also >9o% chance its not going to be ready for the cruise :(

Kracka 04-07-2012 03:28 PM

Re: SE take two!
 
BOOOOOOO :(

PlanoEvo 04-07-2012 06:01 PM

Re: SE take two!
 
Quote:

Originally Posted by Kracka (Post 403660)
BOOOOOOO :(

Unless a miracle happens in the turbo and head come back asap and a host of other unlikely things happen....

PlanoEvo 04-07-2012 06:03 PM

Re: SE take two!
 
Quote:

Originally Posted by Kracka (Post 402647)
Any damage to the transfer case this time?

Nope all good this time :-)

evotuner 04-07-2012 07:00 PM

Re: SE take two!
 
that sucks man, well good luck getting this biotch back on the road asap

scheides 04-07-2012 10:39 PM

Re: SE take two!
 
I have a hoist you can borrow! It's in plymouth.... :D


All times are GMT -5. The time now is 07:25 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.