Originally Posted by scheides (Post 190978)

Good morning everyone! I just wanted to let everyone know that through all this drama, I have been in contact with Mike, and he's agreed to finally look at the turbo that I posted earlier. It'll go to a turbo rebuild shop for their opinion, and then perhaps a few others for their opinion. I took care of this with a few emails with Mike, and I must say that I'm seeing a side of slowboy that I have not seen before. All I had to do was calm down about the past issues & talk it out with him.

Originally Posted by spinz4 (Post 190905)

So by reading this thread I have learned that either SBR is the biggest DSM vendor or the worst. No matter which board I go on there is a thread for you guys.

Either way Chris did take care of me once. I could never contact anyone but when I got in touch with him I received my part asap. I spoke to Chris on AIM today and asked him about a TIAL BOV and IF they had them in stock and he said always and I said I would call in the morning to order one and he said no I will call you and make it easier. So I would say talk to Chris if you are going to order from them. He seems to be the best for his honesty.

But, it is a nervous buy either way!

Im glad I found another board to whore upon today thanks SBR! lol

Originally Posted by Boosted 4 (Post 190954)

Quit lying you sack of shit? Which goofy looking mofo are you in the Slowboy postcard? I wanna whipe my ass with your postcard and send it to you.

Originally Posted by Swifty1638 (Post 191021)

MY balls itch. Discuss.

-A. Swift

Originally Posted by tpunx99GSX (Post 191034)

Prices:
Greddy Type R
Extremepsi.com $201 http://www.extremepsi.com/store/cust...cat=357&page=1
SlowboyRacing.com $209 http://slowboyracing.com/estore/prod...at=1190&page=1

HKS Camshafts:
Extremepsi $330 http://www.extremepsi.com/store/cust...me.php?cat=519
Slowboy $340 or 660 for two http://slowboyracing.com/estore/home.php?cat=204

Tial V44 44mm Wg:
Extremepsi $349.95 http://www.extremepsi.com/store/cust...at=1144&page=1
Slowboy $380.00 http://slowboyracing.com/estore/prod...at=1148&page=1

If you want i can continue, Remember this is only versus extremepsi.com. Im not sure how Slowboy does their shipping but extremepsi is free shipping (7.00 handleing)
Also i have never had a problem with Extremepsi customer service. They sent the wrong filter during my build, i called them and they shipped out a new one next day air for free and let me keep the wrong one.

Originally Posted by SBR Joe (Post 191037)

FYI...We price match.


Joe
SBR

Originally Posted by M/// Guy (Post 191025)

.... but it shouldnt take a 19 page thread to do it.

Originally Posted by SBR Joe (Post 191037)

FYI...We do price matching.


Joe
SBR

Originally Posted by JET (Post 190883)

I need to read a book? I have taken master's level courses in the aftermarket. My professor's have written books! University of Wisconsin - Madison, Executive Education classes. When is the last time you read a book, Mike? Ever been to college?

Originally Posted by Jakey (Post 190922)

You fucked yourselves when your first post was...

Prior opinion of SBR aside, that post is nothing but disrespectful to those who run these forums, plain and simple. Questions?

Originally Posted by S2kracka (Post 190942)

This is awesome, all this thread has done for SBR is to LOSE former and potential customers. SBR GM should start his own shop, he could probably do quite well as a leader as long as he instills the respect he has for customers into his employees.

Originally Posted by talon1979 (Post 190944)

Attn: Mike Huml of Slowboy Racing

I have a customer service issue that was not taken care of. This dates back to 2005 and has not been resolved as of yet. I will give you another opportunity now. I will post up what was said in the e-mails and then go from there. I will edit out my personal information.




"From: "Customer Service" <customerservice@slowboyracing.com> Add to Address Book Add Mobile Alert
To: ...
Subject: RE: Regarding the fmic kit I ordered
Date: Mon, 8 Aug 2005 15:08:16 -0400
...,



Just go ahead and send us back the pipe. Place a note in the box saying what is going on and we will exchange it out for you. Thank you.



Jonathan Nye

Slowboy Racing

Customer Service Representative

724-349-8417 ext 18

www.slowboyracing.com


--------------------------------------------------------------------------------

From: ...
Sent: Sunday, August 07, 2005 3:30 AM
To: Customer Service
Subject: RE: Regarding the fmic kit I ordered



Jon,



I don't have a camera but I may be able to round one up. In the meantime I can explain to you very clearly how short the pipe is. The beads on the pipe come flush to where the coupler is on both sides with the beads still being exposed. It kind of looks like this:



coupler pipe coupler

-----------/\_____________/\----------



bead bead



Three inches or even a little longer than the pipe you sent me should work out great. The turbo I have is a hybrid which still retains a stock DSM manifold but has a garret style center-section and a much larger compressor side. The turbo was a 57 trim from Victory Performance which still retained the stock manifold. When I put this turbo on I had to find a shorter air filter because it moved everything over so far near the passenger side that my existing air filter wouldn't even come close to fit. I will try to find a friend who can take a picture so I can e-mail it to you guys. In the meantime, maybe I will just use a piece of exhaust pipe to fill the gap.



...



Customer Service <customerservice@slowboyracing.com> wrote:

...,



If it is possible I would like to see pictures of your setup with the pipe on. This way we can take a look at it and see exactly what is going on before we give you a pipe with just estimation. Also this way you can take a picture with a tape measure so we know exactly how short it is. If you have any questions please let me know. Thank you.



Jonathan Nye

Slowboy Racing

Customer Service Representative

724-349-8417 ext 18

www.slowboyracing.com


--------------------------------------------------------------------------------

From: ...
Sent: Friday, August 05, 2005 12:54 AM
To: customerservice@slowboyracing.com
Subject: Regarding the fmic kit I ordered



I recently ordered your street fmic kit for a 1g dsm. I received it this last Tuesday. I was getting everything all mounted up today when I noticed that the pipe that goes between the turbo and the intercooler is about three inches too short. This is probably because I have a hybrid turbo. Anyway, I need a longer pipe a.s.a.p. I would be more than willing to ship the piece of pipe that is too short back to you. My e-mail address is ... and I ordered the FMIC kit on your website and paid via Paypal where my name is also ... and my address is



...


Thanks in advance."



I followed the instructions your representative gave to me and the package was sent back twice. The second time around your representative told me he would be looking for the package but it was still rejected.

I will publicly post on this forum whether your company, Slowboy Racing, will perform good customer service and do what you said you would do originally. You stated you have everything in your computer dating back to 2003, well this is from 2005 so I expect you to have it. If you are willing to help me out so I have a complete intercooler kit post up a reply on this forum and I will e-mail you any information you need from me. The pipe is still sitting in the box I mailed it to you in waiting to be shipped.

Originally Posted by Swifty1638 (Post 191021)

MY balls itch. Discuss.

-A. Swift

Originally Posted by SBR INC (Post 191116)

Thank god he is not here anymore -

I am 99% sure you have spoke to Joe this morning - and this should be resolved correct?

If no - shoot me an email - mh@slowboyracing.com

Mike Huml
SBR Inc.

Originally Posted by SBR INC. (Post 191123)

Just wanted to add. Sorry for my shit poor attitude earlier, SBR GM didn't give me a massage this morning and really felt slighted. I may be a GED grease monkey but I have needs too.

I'm also a bit bipolar, suffer from OCD, and occasionally have issues with disassociative identity disorder. I'm in the middle of switching meds so if I have any relapses and start talking to myself or addressing myself in the 3rd person, please understand. Thanks.

Mike Huml
SBR Inc.

PS: sorry for the shit poor service guys, we've been struggling lately. That's why we have only six employees and nothing in stock

Originally Posted by SBR INC. (Post 191123)

Just wanted to add. Sorry for my shit poor attitude earlier, SBR GM didn't give me a massage this morning and really felt slighted. I may be a GED grease monkey but I have needs too.

I'm also a bit bipolar, suffer from OCD, and occasionally have issues with disassociative identity disorder. I'm in the middle of switching meds so if I have any relapses and start talking to myself or addressing myself in the 3rd person, please understand. Thanks.

Mike Huml
SBR Inc.

PS: sorry for the shit poor service guys, we've been struggling lately. That's why we have only six employees and nothing in stock

Originally Posted by At-Least-It's-An-Evo (Post 191128)

eh? My Evo is blue and for sale.

Originally Posted by SBR Joe (Post 191129)

Ill trade you my Colt Vista for it??? ehh...maybe?? lol


joe
SBR

Originally Posted by SBR INC. (Post 191123)

Just wanted to add. Sorry for my shit poor attitude earlier, SBR GM didn't give me a massage this morning and really felt slighted. I may be a GED grease monkey but I have needs too.

I'm also a bit bipolar, suffer from OCD, and occasionally have issues with disassociative identity disorder. I'm in the middle of switching meds so if I have any relapses and start talking to myself or addressing myself in the 3rd person, please understand. Thanks.

Mike Huml
SBR Inc.

PS: sorry for the shit poor service guys, we've been struggling lately. That's why we have only six employees and nothing in stock

Originally Posted by At-Least-It's-An-Evo (Post 191131)

Only if it comes with a built G4CS and heavily ported/built DSM head with all Ferrea components and a fresh wax job.

Originally Posted by v8klla (Post 190848)

Does this apply to wholesale purchases ;)

Chris

Originally Posted by SBR GM (Post 191135)

I will be releasing my WHS part on the website very soon. So in short, you can do automated P.O.'s and place orders 24 hours a day and still retain your pricing!

Jay

Oh, and I will also run more WHS specials :)

Originally Posted by SBR INC (Post 191133)

Honestly - this is really fucked up - even signing my name - I have seen people stoop low - but this is wrong. If you cannot post with your own name - fuck off!

Also - 18 employees -
350-400k worth of product in stock - all paid for!

Mike Huml
SBR Inc.

Originally Posted by SBR INC. (Post 191141)

Christ, guys. At risk of sounding like a broken crankshaft, I just have to apologize for my latest emotional rant. This is what happens when your heart is just kicked to the ground and spat on by your significant other. SBR GM has been ignoring me and even assigned me to answering our phone which happens to be located down the block outside the corner 7-11. Tell me that doesn't suck right? Now you see where I'm coming from.

Next time I tell myself to fuck off I'm going to double my meds. This shit is getting ridiculous.

With love,

Mike Huml
SBR Inc.